| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKTihDUY5VRMtydLWkH3pg+EYdUbss5-mKzrfPOapLP1J0cEXg@mail.gmail.com>
Date: Mon, 4 May 2020 12:57:51 +0200
From: hex dump <hexdump0815@...il.com>
To: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: kishon@...com, robh+dt@...nel.org, vkoul@...nel.org,
devicetree@...r.kernel.org, linux-amlogic@...ts.infradead.org,
narmstrong@...libre.com, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/6] phy: amlogic: meson8b-usb2: Use a MMIO regmap
On Sat, May 2, 2020 at 1:48 PM Martin Blumenstingl
<martin.blumenstingl@...glemail.com> wrote:
>
> Using a MMIO regmap and switch to regmap_update_bits() to simplify the
> code in the driver. Also switch to devm_platform_ioremap_resource()
> instead of open-coding it. No functional changes intended.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Tested-by: hexdump <hexdump0815@...glemail.com>
> ---
> drivers/phy/amlogic/Kconfig | 1 +
> drivers/phy/amlogic/phy-meson8b-usb2.c | 73 ++++++++++++--------------
> 2 files changed, 35 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index 71801e30d601..3495b23af797 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -9,6 +9,7 @@ config PHY_MESON8B_USB2
> depends on USB_SUPPORT
> select USB_COMMON
> select GENERIC_PHY
> + select REGMAP_MMIO
> help
> Enable this to support the Meson USB2 PHYs found in Meson8,
> Meson8b and GXBB SoCs.
> diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
> index bd66bd723e4a..86824cc21f11 100644
> --- a/drivers/phy/amlogic/phy-meson8b-usb2.c
> +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
> @@ -10,6 +10,7 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/regmap.h>
> #include <linux/reset.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> @@ -105,34 +106,24 @@
> #define ACA_ENABLE_COMPLETE_TIME 50
>
> struct phy_meson8b_usb2_priv {
> - void __iomem *regs;
> + struct regmap *regmap;
> enum usb_dr_mode dr_mode;
> struct clk *clk_usb_general;
> struct clk *clk_usb;
> struct reset_control *reset;
> };
>
> -static u32 phy_meson8b_usb2_read(struct phy_meson8b_usb2_priv *phy_priv,
> - u32 reg)
> -{
> - return readl(phy_priv->regs + reg);
> -}
> -
> -static void phy_meson8b_usb2_mask_bits(struct phy_meson8b_usb2_priv *phy_priv,
> - u32 reg, u32 mask, u32 value)
> -{
> - u32 data;
> -
> - data = phy_meson8b_usb2_read(phy_priv, reg);
> - data &= ~mask;
> - data |= (value & mask);
> -
> - writel(data, phy_priv->regs + reg);
> -}
> +static const struct regmap_config phy_meson8b_usb2_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = REG_TUNE,
> +};
>
> static int phy_meson8b_usb2_power_on(struct phy *phy)
> {
> struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
> + u32 reg;
> int ret;
>
> if (!IS_ERR_OR_NULL(priv->reset)) {
> @@ -156,34 +147,34 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
> return ret;
> }
>
> - phy_meson8b_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
> - REG_CONFIG_CLK_32k_ALTSEL);
> + regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
> + REG_CONFIG_CLK_32k_ALTSEL);
>
> - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
> - 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
> + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
> + 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
>
> - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
> - 0x5 << REG_CTRL_FSEL_SHIFT);
> + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK,
> + 0x5 << REG_CTRL_FSEL_SHIFT);
>
> /* reset the PHY */
> - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
> - REG_CTRL_POWER_ON_RESET);
> + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
> + REG_CTRL_POWER_ON_RESET);
> udelay(RESET_COMPLETE_TIME);
> - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
> + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
> udelay(RESET_COMPLETE_TIME);
>
> - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
> - REG_CTRL_SOF_TOGGLE_OUT);
> + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
> + REG_CTRL_SOF_TOGGLE_OUT);
>
> if (priv->dr_mode == USB_DR_MODE_HOST) {
> - phy_meson8b_usb2_mask_bits(priv, REG_ADP_BC,
> - REG_ADP_BC_ACA_ENABLE,
> - REG_ADP_BC_ACA_ENABLE);
> + regmap_update_bits(priv->regmap, REG_ADP_BC,
> + REG_ADP_BC_ACA_ENABLE,
> + REG_ADP_BC_ACA_ENABLE);
>
> udelay(ACA_ENABLE_COMPLETE_TIME);
>
> - if (phy_meson8b_usb2_read(priv, REG_ADP_BC) &
> - REG_ADP_BC_ACA_PIN_FLOAT) {
> + regmap_read(priv->regmap, REG_ADP_BC, ®);
> + if (reg & REG_ADP_BC_ACA_PIN_FLOAT) {
> dev_warn(&phy->dev, "USB ID detect failed!\n");
> clk_disable_unprepare(priv->clk_usb);
> clk_disable_unprepare(priv->clk_usb_general);
> @@ -213,18 +204,22 @@ static const struct phy_ops phy_meson8b_usb2_ops = {
> static int phy_meson8b_usb2_probe(struct platform_device *pdev)
> {
> struct phy_meson8b_usb2_priv *priv;
> - struct resource *res;
> struct phy *phy;
> struct phy_provider *phy_provider;
> + void __iomem *base;
>
> priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - priv->regs = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(priv->regs))
> - return PTR_ERR(priv->regs);
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> + &phy_meson8b_usb2_regmap_conf);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
>
> priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
> if (IS_ERR(priv->clk_usb_general))
> --
> 2.26.2
>
Powered by blists - more mailing lists