| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DM6PR02MB5386B2BC995622312F8D241DC2A60@DM6PR02MB5386.namprd02.prod.outlook.com>
Date: Mon, 4 May 2020 11:58:41 +0000
From: Nava kishore Manne <navam@...inx.com>
To: Moritz Fischer <mdf@...nel.org>
CC: Michal Simek <michals@...inx.com>,
"linux-fpga@...r.kernel.org" <linux-fpga@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"chinnikishore369@...il.com" <chinnikishore369@...il.com>
Subject: RE: [PATCH 2/2] fpga: zynq: Add AFI config driver
Corrected typo
> -----Original Message-----
> From: Nava kishore Manne
> Sent: Monday, May 4, 2020 5:25 PM
> To: 'Moritz Fischer' <mdf@...nel.org>
> Cc: Michal Simek <michals@...inx.com>; linux-fpga@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> chinnikishore369@...il.com
> Subject: RE: [PATCH 2/2] fpga: zynq: Add AFI config driver
>
> Hi Moritz,
>
> Thanks for proving the comments.
> Please find my response inline.
>
> > -----Original Message-----
> > From: Moritz Fischer [mailto:mdf@...nel.org]
> > Sent: Thursday, April 23, 2020 8:59 AM
> > To: Nava kishore Manne <navam@...inx.com>
> > Cc: mdf@...nel.org; Michal Simek <michals@...inx.com>; linux-
> > fpga@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> > kernel@...r.kernel.org; chinnikishore369@...il.com
> > Subject: Re: [PATCH 2/2] fpga: zynq: Add AFI config driver
> >
> > Hi Nava,
> >
> > On Wed, Apr 15, 2020 at 03:54:50PM +0530, Nava kishore Manne wrote:
> > > This patch Adds AFI config driver. This is useful for the PS to PL
> > > configuration for the fpga manager On zynq platform.
> > >
> > > Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
> > > ---
> > > drivers/fpga/Kconfig | 8 +++++
> > > drivers/fpga/Makefile | 1 +
> > > drivers/fpga/zynq-afi.c | 81
> > > +++++++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 90 insertions(+)
> > > create mode 100644 drivers/fpga/zynq-afi.c
> > >
> > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index
> > > 474f304e..60982a0 100644
> > > --- a/drivers/fpga/Kconfig
> > > +++ b/drivers/fpga/Kconfig
> > > @@ -214,4 +214,12 @@ config FPGA_MGR_ZYNQMP_FPGA
> > > to configure the programmable logic(PL) through PS
> > > on ZynqMP SoC.
> > >
> > > +config FPGA_MGR_ZYNQ_AFI_FPGA
> > > + bool "Xilinx AFI FPGA"
> > > + depends on FPGA_MGR_ZYNQ_FPGA
> > Curious. How does this dependency play in here?
> > > + help
> > > + Zynq AFI driver support for writing to the AFI registers
> > > + for configuring the PS_PL interface. For some of the bitstream
> > > + or designs to work the PS to PL interfaces need to be configured
> > > + like the data bus-width etc.
> > > endif # FPGA
> > > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index
> > > 312b937..d115e29 100644
> > > --- a/drivers/fpga/Makefile
> > > +++ b/drivers/fpga/Makefile
> > > @@ -26,6 +26,7 @@ obj-$(CONFIG_FPGA_BRIDGE) += fpga-
> > bridge.o
> > > obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-
> > fpga2sdram.o
> > > obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
> > > obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
> > > +obj-$(CONFIG_FPGA_MGR_ZYNQ_AFI_FPGA) += zynq-afi.o
> > >
> > > # High Level Interfaces
> > > obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> > > diff --git a/drivers/fpga/zynq-afi.c b/drivers/fpga/zynq-afi.c new
> > > file mode 100644 index 0000000..7ce0d08
> > > --- /dev/null
> > > +++ b/drivers/fpga/zynq-afi.c
> > > @@ -0,0 +1,81 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Xilinx FPGA AFI driver.
> > > + * Copyright (c) 2018 Xilinx Inc.
> > > + */
> > > +
> > > +#include <linux/err.h>
> > > +#include <linux/io.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/platform_device.h>
> > > +
> > > +/* Registers and special values for doing register-based operations */
> > > +#define AFI_RDCHAN_CTRL_OFFSET 0x00
> > > +#define AFI_WRCHAN_CTRL_OFFSET 0x14
> > > +
> > > +#define AFI_BUSWIDTH_MASK 0x01
> > > +
> > > +/**
> > > + * struct afi_fpga - AFI register description
> > > + * @membase: pointer to register struct
> > > + * @afi_width: AFI bus width to be written
> > > + */
> > > +struct zynq_afi_fpga {
> > > + void __iomem *membase;
> > > + u32 afi_width;
> > > +};
> > > +
> > > +static int zynq_afi_fpga_probe(struct platform_device *pdev) {
> > > + struct zynq_afi_fpga *afi_fpga;
> > > + struct resource *res;
> > > + u32 reg_val;
> > > + u32 val;
> > > +
> > > + afi_fpga = devm_kzalloc(&pdev->dev, sizeof(*afi_fpga), GFP_KERNEL);
> > > + if (!afi_fpga)
> > > + return -ENOMEM;
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + afi_fpga->membase = devm_ioremap_resource(&pdev->dev, res);
> > > + if (IS_ERR(afi_fpga->membase))
> > > + return PTR_ERR(afi_fpga->membase);
> > > +
> > > + val = device_property_read_u32(&pdev->dev, "xlnx,afi-width",
> > > + &afi_fpga->afi_width);
> > > + if (val) {
> > > + dev_err(&pdev->dev, "Fail to get the afi bus width\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + reg_val = readl(afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > > + writel(reg_val | afi_fpga->afi_width,
> > > + afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
> > > + reg_val = readl(afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > > + reg_val &= ~AFI_BUSWIDTH_MASK;
> > > + writel(reg_val | afi_fpga->afi_width,
> > > + afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct of_device_id zynq_afi_fpga_ids[] = {
> > > + { .compatible = "xlnx,zynq-afi-fpga" },
> > > + { },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, zynq_afi_fpga_ids);
> > > +
> > > +static struct platform_driver zynq_afi_fpga_driver = {
> > > + .driver = {
> > > + .name = "zynq-afi-fpga",
> > > + .of_match_table = zynq_afi_fpga_ids,
> > > + },
> > > + .probe = zynq_afi_fpga_probe,
> > > +};
> > > +module_platform_driver(zynq_afi_fpga_driver);
> > > +
> > > +MODULE_DESCRIPTION("ZYNQ FPGA AFI module");
> > MODULE_AUTHOR("Nava
> > > +kishore Manne <nava.manne@...inx.com>"); MODULE_LICENSE("GPL v2");
> > > --
> > > 2.7.4
> > >
> >
> > It looks like all the driver does is writing two registers? How does
> > that fit into FPGA Manager as a framework. Should this maybe be eithe
> > for Zynq architecture or a Misc driver instead?
> >
> To establish the proper communication channel between PS and PL, The AXI
> Interface Bus Width should be configured properly.
> For a design to design this AXI Interface Bus Width settings are vary. So for Zynq
> just loading the Bitstream into the PL is not sufficient to establish a proper
> communication channel between PS and PL we have to do AXI Interface Bus
> Width settings as per the design after loading the Bit file into the PL. I feel this is
> more relevant to the FPGA settings so I have placed this driver here.
>
> Please suggest the best place to put this driver.
>
> > Is the idea here to create the device via an overlay?
> Yes, this driver loading/removal is triggered by the overlay after loading the bit
> file into the PL.
>
> Regards,
> Navakishore.
Powered by blists - more mailing lists