linux-kernel - [PATCH v3 0/7] net: macb: Wake-on-Lan magic packet fixes and GEM handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <cover.1588597759.git.nicolas.ferre@microchip.com>
Date:   Mon, 4 May 2020 15:44:15 +0200
From:   <nicolas.ferre@...rochip.com>
To:     <linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
        "Claudiu Beznea" <claudiu.beznea@...rochip.com>,
        <harini.katakam@...inx.com>
CC:     <linux-kernel@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        <antoine.tenart@...tlin.com>, <f.fainelli@...il.com>,
        <linux@...linux.org.uk>, <andrew@...n.ch>,
        <michal.simek@...inx.com>,
        "Nicolas Ferre" <nicolas.ferre@...rochip.com>
Subject: [PATCH v3 0/7] net: macb: Wake-on-Lan magic packet fixes and GEM handling

From: Nicolas Ferre <nicolas.ferre@...rochip.com>

Hi,
Here is the 3rd series to fix WoL magic-packet on the current macb driver.
I also add, in the second part of this series the feature to GEM types of IPs.
Please tell me if they should be separated; but the two last patches cannot go
without the 5 fixes first ones.

MACB and GEM code must co-exist and as they don't share exactly the same
register layout, I had to specialize a bit the suspend/resume paths and plug a
specific IRQ handler in order to avoid overloading the "normal" IRQ hot path.

The use of dumb buffers for RX that Harini implemented in [1] might
need to be considered for a follow-up patch series in order to address
lower-power modes on some of the platforms.
For instance, I didn't have to implement dumb buffers for some of the simpler
ARM9 platforms using MACB+FIFO types of controllers.

Please give feedback. Best regards,
  Nicolas

[1]:
https://github.com/Xilinx/linux-xlnx/commit/e9648006e8d9132db2594e50e700af362b3c9226#diff-41909d180431659ccc1229aa30fd4e5a
https://github.com/Xilinx/linux-xlnx/commit/60a21c686f7e4e50489ae04b9bb1980b145e52ef

Changes in v3:
- Revert some of the v2 changes done in macb_resume(). Now the resume function
  supports in-depth re-configuration of the controller in order to deal with
  deeper sleep states. Basically as it was before changes introduced by this
  series
- Tested for non-regression with our deeper Power Management mode which cuts
  power to the controller completely

Changes in v2:
- Add patch 4/7 ("net: macb: fix macb_suspend() by removing call to netif_carrier_off()")
  needed for keeping phy state consistent
- Add patch 5/7 ("net: macb: fix call to pm_runtime in the suspend/resume functions") that prevent
  putting the macb in runtime pm suspend mode when WoL is used
- Collect review tags on 3 first patches from Florian: Thanks!
- Review of macb_resume() function
- Addition of pm_wakeup_event() in both MACB and GEM WoL IRQ handlers

Nicolas Ferre (7):
  net: macb: fix wakeup test in runtime suspend/resume routines
  net: macb: mark device wake capable when "magic-packet" property
    present
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: WoL support for GEM type of Ethernet controller
  net: macb: Add WoL interrupt support for MACB type of Ethernet
    controller

 drivers/net/ethernet/cadence/macb.h      |   3 +
 drivers/net/ethernet/cadence/macb_main.c | 209 +++++++++++++++++++----
 2 files changed, 176 insertions(+), 36 deletions(-)

-- 
2.26.2