| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200504154757.17519-5-ckeepax@opensource.cirrus.com>
Date: Mon, 4 May 2020 16:47:57 +0100
From: Charles Keepax <ckeepax@...nsource.cirrus.com>
To: <robh+dt@...nel.org>, <lee.jones@...aro.org>, <broonie@...nel.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>, <jdelvare@...e.com>,
<linux@...ck-us.net>, <linus.walleij@...aro.org>
CC: <lgirdwood@...il.com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <patches@...nsource.cirrus.com>
Subject: [PATCH v2 5/5] mfd: lochnagar: Move binding over to dtschema
Signed-off-by: Charles Keepax <ckeepax@...nsource.cirrus.com>
---
Changes since v1:
- Removed contains on the compatible
- Moved all sub-nodes into here directly only using $ref for properties
- As the regulator binding only contained subnodes that file is now deleted
- Removed some pointless descriptions
A little nervous about the amount of clock and regulator stuff this
pulls into the MFD file, any comments on that welcome? Would it be worth
looking into something along the lines of the definitions stuff to keep
some of that out in the clock and regulator bindings?
Thanks,
Charles
.../devicetree/bindings/mfd/cirrus,lochnagar.txt | 85 -----
.../devicetree/bindings/mfd/cirrus,lochnagar.yaml | 352 +++++++++++++++++++++
.../bindings/regulator/cirrus,lochnagar.txt | 82 -----
MAINTAINERS | 11 +-
4 files changed, 357 insertions(+), 173 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
deleted file mode 100644
index 3bf92ad37fa1b..0000000000000
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-Also see these documents for generic binding information:
- [1] GPIO : ../gpio/gpio.txt
-
-And these for relevant defines:
- [2] include/dt-bindings/pinctrl/lochnagar.h
- [3] include/dt-bindings/clock/lochnagar.h
-
-And these documents for the required sub-node binding details:
- [4] Clock: ../clock/cirrus,lochnagar.txt
- [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
- [6] Regulator: ../regulator/cirrus,lochnagar.txt
- [7] Sound: ../sound/cirrus,lochnagar.txt
- [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar1"
- "cirrus,lochnagar2"
-
- - reg : I2C slave address
-
- - reset-gpios : Reset line to the Lochnagar, see [1].
-
-Required sub-nodes:
-
- - lochnagar-clk : Binding for the clocking components, see [4].
-
- - lochnagar-pinctrl : Binding for the pin control components, see [5].
-
-Optional sub-nodes:
-
- - Bindings for the regulator components, see [6]. Only available on
- Lochnagar 2.
-
- - lochnagar-sc : Binding for the sound card components, see [7].
- Only available on Lochnagar 2.
- - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
- Only available on Lochnagar 2.
-
-Optional properties:
-
- - present-gpios : Host present line, indicating the presence of a
- host system, see [1]. This can be omitted if the present line is
- tied in hardware.
-
-Example:
-
-lochnagar: lochnagar@22 {
- compatible = "cirrus,lochnagar2";
- reg = <0x22>;
-
- reset-gpios = <&gpio0 55 0>;
- present-gpios = <&gpio0 60 0>;
-
- lochnagar-clk {
- compatible = "cirrus,lochnagar2-clk";
- ...
- };
-
- lochnagar-pinctrl {
- compatible = "cirrus,lochnagar-pinctrl";
- ...
- };
-
- lochnagar-sc {
- compatible = "cirrus,lochnagar2-soundcard";
- ...
- };
-
- lochnagar-hwmon {
- compatible = "cirrus,lochnagar2-hwmon";
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000000..7a616577ac634
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -0,0 +1,352 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@...nsource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of
+ various application processor systems to provide a full evaluation
+ platform. Audio system topology, clocking and power can all be
+ controlled through the Lochnagar, allowing the device under test
+ to be used in a variety of possible use cases.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+
+ And these for relevant defines:
+ [2] include/dt-bindings/pinctrl/lochnagar.h
+ [3] include/dt-bindings/clock/lochnagar.h
+
+ And these documents for the required sub-node binding details:
+ [4] Clock: ../clock/cirrus,lochnagar.yaml
+ [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+ [6] Sound: ../sound/cirrus,lochnagar.yaml
+ [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2
+ then:
+ properties:
+ lochnagar-hwmon:
+ type: object
+ $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+ lochnagar-sc:
+ type: object
+ $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar1
+ - cirrus,lochnagar2
+
+ reg:
+ const: 0x22
+
+ reset-gpios:
+ maxItems: 1
+
+ present-gpios:
+ description: |
+ Host present line, indicating the presence of a
+ host system, see [1]. This can be omitted if the present line is
+ tied in hardware.
+ maxItems: 1
+
+ lochnagar-clk:
+ type: object
+ $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+ lochnagar-pmic32k:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 32768
+
+ lochnagar-clk12m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 12288000
+
+ lochnagar-clk11m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 11298600
+
+ lochnagar-clk24m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 24576000
+
+ lochnagar-clk22m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 22579200
+
+ lochnagar-clk8m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 8192000
+
+ lochnagar-usb24m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 24576000
+
+ lochnagar-usb12m:
+ type: object
+ $ref: /schemas/clock/fixed-clock.yaml#
+ properties:
+ clock-frequency:
+ const: 12288000
+
+ lochnagar-pinctrl:
+ type: object
+ $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+ VDDCORE:
+ description:
+ Initialisation data for the VDDCORE regulator, which supplies the
+ CODECs digital core if not being provided by an internal regulator.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-vddcore
+
+ SYSVDD-supply:
+ description:
+ Primary power supply for the Lochnagar.
+ required:
+ - compatible
+
+ MICVDD:
+ description:
+ Initialisation data for the MICVDD regulator, which supplies the
+ CODECs MICVDD.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-micvdd
+
+ SYSVDD-supply:
+ description:
+ Primary power supply for the Lochnagar.
+ required:
+ - compatible
+
+ MIC1VDD:
+ description:
+ Initialisation data for the MIC1VDD supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-mic1vdd
+
+ cirrus,micbias-input:
+ description:
+ A property selecting which of the CODEC minicard micbias outputs
+ should be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+
+ MICBIAS1-supply:
+ description:
+ Regulator supplies for the MIC1VDD outputs, supplying the digital
+ microphones, normally supplied from the attached CODEC.
+ required:
+ - compatible
+
+ MIC2VDD:
+ description:
+ Initialisation data for the MIC2VDD supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-mic2vdd
+
+ cirrus,micbias-input:
+ description:
+ A property selecting which of the CODEC minicard micbias outputs
+ should be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+
+ MICBIAS2-supply:
+ description:
+ Regulator supplies for the MIC2VDD outputs, supplying the digital
+ microphones, normally supplied from the attached CODEC.
+ required:
+ - compatible
+
+ VDD1V8:
+ description:
+ Recommended fixed regulator for the VDD1V8 regulator, which supplies
+ the CODECs analog and 1.8V digital supplies.
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ enum:
+ - regulator-fixed
+
+ regulator-min-microvolt:
+ const: 1800000
+
+ regulator-max-microvolt:
+ const: 1800000
+
+ vin-supply:
+ description:
+ Should be set to same supply as SYSVDD
+ required:
+ - compatible
+ - regulator-min-microvolt
+ - regulator-max-microvolt
+ - regulator-boot-on
+ - regulator-always-on
+ - vin-supply
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - lochnagar-clk
+ - lochnagar-pinctrl
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clk/lochnagar.h>
+ #include <dt-bindings/pinctrl/lochnagar.h>
+ i2c@...04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0004000 0x1000>;
+
+ lochnagar: lochnagar@22 {
+ compatible = "cirrus,lochnagar2";
+ reg = <0x22>;
+
+ reset-gpios = <&gpio0 55 0>;
+ present-gpios = <&gpio0 60 0>;
+
+ lochnagarclk: lochnagar-clk {
+ compatible = "cirrus,lochnagar2-clk";
+
+ #clock-cells = <1>;
+ clocks = <&clkaudio>, <&clkpmic>;
+ clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+ assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+ <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+ assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+ };
+
+ clkpmic: lochnagar-pmic32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ lochnagar-pinctrl {
+ compatible = "cirrus,lochnagar-pinctrl";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinsettings>;
+
+ pinsettings: pin-settings {
+ ap2aif-pins {
+ input-enable;
+ groups = "gf-aif1";
+ function = "codec-aif3";
+ };
+ codec2aif-pins {
+ output-enable;
+ groups = "codec-aif3";
+ function = "gf-aif1";
+ };
+ };
+ };
+
+ lochnagar-sc {
+ compatible = "cirrus,lochnagar2-soundcard";
+
+ #sound-dai-cells = <1>;
+
+ clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+ clock-names = "mclk";
+ };
+
+ lochnagar-hwmon {
+ compatible = "cirrus,lochnagar2-hwmon";
+ };
+
+ MIC1VDD {
+ compatible = "cirrus,lochnagar2-mic1vdd";
+
+ cirrus,micbias-input = <3>;
+ };
+
+ MICVDD {
+ compatible = "cirrus,lochnagar2-micvdd";
+
+ SYSVDD-supply = <&wallvdd>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ VDD1V8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+
+ vin-supply = <&wallvdd>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
deleted file mode 100644
index 91974e6ee251b..0000000000000
--- a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the regulator portion
-of the driver.
-
-Also see these documents for generic binding information:
- [1] Regulator: ../regulator/regulator.txt
-
-This binding must be part of the Lochnagar MFD binding:
- [2] ../mfd/cirrus,lochnagar.txt
-
-Optional sub-nodes:
-
- - VDDCORE : Initialisation data for the VDDCORE regulator, which
- supplies the CODECs digital core if it has no build regulator for that
- purpose.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-vddcore"
- - SYSVDD-supply: Primary power supply for the Lochnagar.
-
- - MICVDD : Initialisation data for the MICVDD regulator, which
- supplies the CODECs MICVDD.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-micvdd"
- - SYSVDD-supply: Primary power supply for the Lochnagar.
-
- - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
- Required Properties:
- - compatible : One of the following strings:
- "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd"
- Optional Properties:
- - cirrus,micbias-input : A property selecting which of the CODEC
- minicard micbias outputs should be used, valid values are 1 - 4.
- - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
- MICxVDD outputs, supplying the digital microphones, normally
- supplied from the attached CODEC.
-
- - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
- CODECs analog and 1.8V digital supplies.
- Required Properties:
- - compatible : Should be set to "regulator-fixed"
- - regulator-min-microvolt : Should be set to 1.8V
- - regulator-max-microvolt : Should be set to 1.8V
- - regulator-boot-on
- - regulator-always-on
- - vin-supply : Should be set to same supply as SYSVDD
-
-Example:
-
-lochnagar {
- lochnagar-micvdd: MICVDD {
- compatible = "cirrus,lochnagar2-micvdd";
-
- SYSVDD-supply = <&wallvdd>;
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- lochnagar-vdd1v8: VDD1V8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VDD1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
-
- vin-supply = <&wallvdd>;
- };
-};
-
diff --git a/MAINTAINERS b/MAINTAINERS
index e64e5db314976..91bf1fbe98c8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4062,12 +4062,11 @@ M: Charles Keepax <ckeepax@...nsource.cirrus.com>
M: Richard Fitzgerald <rf@...nsource.cirrus.com>
L: patches@...nsource.cirrus.com
S: Supported
-F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
-F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
F: Documentation/hwmon/lochnagar.rst
F: drivers/clk/clk-lochnagar.c
F: drivers/hwmon/lochnagar-hwmon.c
--
2.11.0
Powered by blists - more mailing lists