lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 05 May 2020 14:53:19 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     Matthias Brugger <mbrugger@...e.com>, u-boot@...ts.denx.de,
        bmeng.cn@...il.com, marex@...x.de, linux-kernel@...r.kernel.org
Cc:     sjg@...omium.org, m.szyprowski@...sung.com, s.nawrocki@...sung.com
Subject: Re: [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

Hi Matthias,

On Tue, 2020-05-05 at 14:15 +0200, Matthias Brugger wrote:
> 
> On 30/04/2020 15:04, Nicolas Saenz Julienne wrote:
> > When needed, RPi4's co-processor (called VideoCore) has to be instructed
> > to load VL805's firmware (the chip providing xHCI support). VideoCore's
> > firmware expects the board's PCIe bus to be already configured in order
> > for it to load the xHCI chip firmware. So we have to make sure this
> > happens in between the PCIe configuration and xHCI startup.
> > 
> > Introduce a callback in xhci_pci_probe() to run this platform specific
> > routine.
> > 
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> > 
> > ---
> > 
> > Changes since v1:
> >  - Create callback
> > 
> >  board/raspberrypi/rpi/rpi.c | 12 ++++++++++++
> >  drivers/usb/host/xhci-pci.c |  6 ++++++
> >  include/usb/xhci.h          |  3 +++
> >  3 files changed, 21 insertions(+)
> > 
> > diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> > index e367ba3092..8aa78d1f48 100644
> > --- a/board/raspberrypi/rpi/rpi.c
> > +++ b/board/raspberrypi/rpi/rpi.c
> > @@ -14,6 +14,7 @@
> >  #include <lcd.h>
> >  #include <memalign.h>
> >  #include <mmc.h>
> > +#include <usb/xhci.h>
> >  #include <asm/gpio.h>
> >  #include <asm/arch/mbox.h>
> >  #include <asm/arch/msg.h>
> > @@ -494,3 +495,14 @@ int ft_board_setup(void *blob, bd_t *bd)
> >  
> >  	return 0;
> >  }
> > +
> > +#ifdef CONFIG_BCM2711
> 
> This won't work with rpi_arm64_defconfig.
> Can't we just evaluate at runtime if we need to do anything in xhci_pci_fixup.

I can't see why, who is going to call xhci_pci_probe() in RPi3?

Regards,
Nicolas

> I wonder if the newer RPi4 have also a newer revision ID (see get_board_rev).
> If
> so we could add another bool to struct rpi_model which will indicate us if we
> need to notify VideoCore about vl805's firmware.
> 
> > +void xhci_pci_fixup(struct udevice *dev)
> > +{
> > +	int ret;
> > +
> > +	ret = bcm2711_notify_vl805_reset();
> > +	if (ret)
> > +		printf("RPI: Failed to notify VideoCore about vl805's
> > firmware\n");
> > +}
> > +#endif
> > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > index c1f60da541..1285dde1ef 100644
> > --- a/drivers/usb/host/xhci-pci.c
> > +++ b/drivers/usb/host/xhci-pci.c
> > @@ -11,6 +11,10 @@
> >  #include <usb.h>
> >  #include <usb/xhci.h>
> >  
> > +__weak void xhci_pci_fixup(struct udevice *dev)
> > +{
> > +}
> > +
> >  static void xhci_pci_init(struct udevice *dev, struct xhci_hccr **ret_hccr,
> >  			  struct xhci_hcor **ret_hcor)
> >  {
> > @@ -40,6 +44,8 @@ static int xhci_pci_probe(struct udevice *dev)
> >  	struct xhci_hccr *hccr;
> >  	struct xhci_hcor *hcor;
> >  
> > +	xhci_pci_fixup(dev);
> > +
> >  	xhci_pci_init(dev, &hccr, &hcor);
> >  
> >  	return xhci_register(dev, hccr, hcor);
> > diff --git a/include/usb/xhci.h b/include/usb/xhci.h
> > index c16106a2fc..57feed7603 100644
> > --- a/include/usb/xhci.h
> > +++ b/include/usb/xhci.h
> > @@ -16,6 +16,7 @@
> >  #ifndef HOST_XHCI_H_
> >  #define HOST_XHCI_H_
> >  
> > +#include <usb.h>
> >  #include <asm/types.h>
> >  #include <asm/cache.h>
> >  #include <asm/io.h>
> > @@ -1281,4 +1282,6 @@ extern struct dm_usb_ops xhci_usb_ops;
> >  
> >  struct xhci_ctrl *xhci_get_ctrl(struct usb_device *udev);
> >  
> > +extern void xhci_pci_fixup(struct udevice *dev);
> > +
> >  #endif /* HOST_XHCI_H_ */
> > 


Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists