Date:   Tue, 05 May 2020 15:16:38 +0200
From:   Thomas Gleixner <tglx@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     x86@...nel.org, "Paul E. McKenney" <paulmck@...nel.org>,
        Andy Lutomirski <luto@...nel.org>,
        Alexandre Chartre <alexandre.chartre@...cle.com>,
        Frederic Weisbecker <frederic@...nel.org>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Sean Christopherson <sean.j.christopherson@...el.com>,
        Masami Hiramatsu <mhiramat@...nel.org>,
        Petr Mladek <pmladek@...e.com>,
        Steven Rostedt <rostedt@...dmis.org>,
        Joel Fernandes <joel@...lfernandes.org>,
        Boris Ostrovsky <boris.ostrovsky@...cle.com>,
        Juergen Gross <jgross@...e.com>,
        Brian Gerst <brgerst@...il.com>,
        Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
        Josh Poimboeuf <jpoimboe@...hat.com>,
        Will Deacon <will@...nel.org>,
        "Peter Zijlstra (Intel)" <peterz@...radead.org>
Subject: [patch V4 part 1 36/36] rcu: Make RCU IRQ enter/exit functions rely
 on in_nmi()

From: Paul E. McKenney <paulmck@...nel.org>

The rcu_nmi_enter_common() and rcu_nmi_exit_common() functions take an
"irq" parameter that indicates whether these functions are invoked from
an irq handler (irq==true) or an NMI handler (irq==false).  However,
recent changes have applied notrace to a few critical functions such
that rcu_nmi_enter_common() and rcu_nmi_exit_common() many now rely
on in_nmi().  Note that in_nmi() works no differently than before,
but rather that tracing is now prohibited in code regions where in_nmi()
would incorrectly report NMI state.

Therefore remove the "irq" parameter and inlines rcu_nmi_enter_common() and
rcu_nmi_exit_common() into rcu_nmi_enter() and rcu_nmi_exit(),
respectively.

Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@...radead.org>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
 kernel/rcu/tree.c |   47 +++++++++++++++--------------------------------
 1 file changed, 15 insertions(+), 32 deletions(-)

--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -627,16 +627,18 @@ noinstr void rcu_user_enter(void)
 }
 #endif /* CONFIG_NO_HZ_FULL */
 
-/*
+/**
+ * rcu_nmi_exit - inform RCU of exit from NMI context
+ *
  * If we are returning from the outermost NMI handler that interrupted an
  * RCU-idle period, update rdp->dynticks and rdp->dynticks_nmi_nesting
  * to let the RCU grace-period handling know that the CPU is back to
  * being RCU-idle.
  *
- * If you add or remove a call to rcu_nmi_exit_common(), be sure to test
+ * If you add or remove a call to rcu_nmi_exit(), be sure to test
  * with CONFIG_RCU_EQS_DEBUG=y.
  */
-static __always_inline void rcu_nmi_exit_common(bool irq)
+noinstr void rcu_nmi_exit(void)
 {
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 
@@ -667,7 +669,7 @@ static __always_inline void rcu_nmi_exit
 	trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nmi_nesting, 0, atomic_read(&rdp->dynticks));
 	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0); /* Avoid store tearing. */
 
-	if (irq)
+	if (!in_nmi())
 		rcu_prepare_for_idle();
 	instr_end();
 
@@ -675,22 +677,11 @@ static __always_inline void rcu_nmi_exit
 	rcu_dynticks_eqs_enter();
 	// ... but is no longer watching here.
 
-	if (irq)
+	if (!in_nmi())
 		rcu_dynticks_task_enter();
 }
 
 /**
- * rcu_nmi_exit - inform RCU of exit from NMI context
- *
- * If you add or remove a call to rcu_nmi_exit(), be sure to test
- * with CONFIG_RCU_EQS_DEBUG=y.
- */
-void noinstr rcu_nmi_exit(void)
-{
-	rcu_nmi_exit_common(false);
-}
-
-/**
  * rcu_irq_exit - inform RCU that current CPU is exiting irq towards idle
  *
  * Exit from an interrupt handler, which might possibly result in entering
@@ -712,7 +703,7 @@ void noinstr rcu_nmi_exit(void)
 void noinstr rcu_irq_exit(void)
 {
 	lockdep_assert_irqs_disabled();
-	rcu_nmi_exit_common(true);
+	rcu_nmi_exit();
 }
 
 /*
@@ -801,7 +792,7 @@ void noinstr rcu_user_exit(void)
 #endif /* CONFIG_NO_HZ_FULL */
 
 /**
- * rcu_nmi_enter_common - inform RCU of entry to NMI context
+ * rcu_nmi_enter - inform RCU of entry to NMI context
  * @irq: Is this call from rcu_irq_enter?
  *
  * If the CPU was idle from RCU's viewpoint, update rdp->dynticks and
@@ -810,10 +801,10 @@ void noinstr rcu_user_exit(void)
  * long as the nesting level does not overflow an int.  (You will probably
  * run out of stack space first.)
  *
- * If you add or remove a call to rcu_nmi_enter_common(), be sure to test
+ * If you add or remove a call to rcu_nmi_enter(), be sure to test
  * with CONFIG_RCU_EQS_DEBUG=y.
  */
-static __always_inline void rcu_nmi_enter_common(bool irq)
+noinstr void rcu_nmi_enter(void)
 {
 	long incby = 2;
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
@@ -831,18 +822,18 @@ static __always_inline void rcu_nmi_ente
 	 */
 	if (rcu_dynticks_curr_cpu_in_eqs()) {
 
-		if (irq)
+		if (!in_nmi())
 			rcu_dynticks_task_exit();
 
 		// RCU is not watching here ...
 		rcu_dynticks_eqs_exit();
 		// ... but is watching here.
 
-		if (irq)
+		if (!in_nmi())
 			rcu_cleanup_after_idle();
 
 		incby = 1;
-	} else if (irq) {
+	} else if (!in_nmi()) {
 		instr_begin();
 		if (tick_nohz_full_cpu(rdp->cpu) &&
 		    rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
@@ -877,14 +868,6 @@ static __always_inline void rcu_nmi_ente
 }
 
 /**
- * rcu_nmi_enter - inform RCU of entry to NMI context
- */
-noinstr void rcu_nmi_enter(void)
-{
-	rcu_nmi_enter_common(false);
-}
-
-/**
  * rcu_irq_enter - inform RCU that current CPU is entering irq away from idle
  *
  * Enter an interrupt handler, which might possibly result in exiting
@@ -909,7 +892,7 @@ noinstr void rcu_nmi_enter(void)
 noinstr void rcu_irq_enter(void)
 {
 	lockdep_assert_irqs_disabled();
-	rcu_nmi_enter_common(true);
+	rcu_nmi_enter();
 }
 
 /*

Powered by blists - more mailing lists