linux-kernel - Re: [PATCH v8 1/5] dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Wed, 6 May 2020 09:47:32 +0530
From:   Vinod Koul <vkoul@...nel.org>
To:     Wesley Cheng <wcheng@...eaurora.org>
Cc:     Rob Herring <robh@...nel.org>, agross@...nel.org,
        bjorn.andersson@...aro.org, kishon@...com, robh+dt@...nel.org,
        mark.rutland@....com, p.zabel@...gutronix.de,
        mgautam@...eaurora.org, sboyd@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, jackp@...eaurora.org
Subject: Re: [PATCH v8 1/5] dt-bindings: phy: Add binding for
 qcom,usb-snps-femto-v2

On 05-05-20, 12:38, Wesley Cheng wrote:
> 
> 
> On 5/5/2020 6:34 AM, Rob Herring wrote:
> > On Mon,  4 May 2020 16:54:23 -0700, Wesley Cheng wrote:
> >> This binding shows the descriptions and properties for the
> >> Synopsis Femto USB PHY V2 used on QCOM platforms.
> >>
> >> Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
> >> Reviewed-by: Rob Herring <robh@...nel.org>
> >> Reviewed-by: Stephen Boyd <sboyd@...nel.org>
> >> ---
> >>  .../bindings/phy/qcom,usb-snps-femto-v2.yaml       | 77 ++++++++++++++++++++++
> >>  1 file changed, 77 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
> >>
> > 
> > My bot found errors running 'make dt_binding_check' on your patch:
> > 
> > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.example.dt.yaml: phy@...2000: 'vdda-pll-supply' is a required property
> > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.example.dt.yaml: phy@...2000: 'vdda18-supply' is a required property
> > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.example.dt.yaml: phy@...2000: 'vdda33-supply' is a required property
> > 
> > See https://patchwork.ozlabs.org/patch/1283143
> > 
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure dt-schema is up to date:
> > 
> > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> > 
> > Please check and re-submit.
> > 
> 
> Hi Rob,
> 
> I updated the dt-schema version, and I can see the same error.  Will fix
> and resubmit.  I also realized that the dt_binding_check doesn't stop if

No, pls submit the fix against already applied patches and also give
credit to Rob by adding a "Reported-by: ..."

> errors are detected in the example DT checking phase, and that was
> probably why I missed this initially.  I'll pass the DT_SCHEMA_FILES
> argument to my specific binding next time to help verify my file.
> Thanks again!
> 
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

-- 
~Vinod