linux-kernel - [PATCH] clocksource: davinci: Use a more common logging style

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <4ca58f594156d1311f2207d755da89879e060333.camel@perches.com>
Date:   Wed, 06 May 2020 10:59:30 -0700
From:   Joe Perches <joe@...ches.com>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>
Cc:     Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        LKML <linux-kernel@...r.kernel.org>,
        Christophe JAILLET <christophe.jaillet@...adoo.fr>
Subject: [PATCH] clocksource: davinci: Use a more common logging style

This code is using a newline termination on a #define pr_fmt but
pr_<level> uses have a terminating newline on the format.

Remove the newline from the pr_fmt and add it to the pr_<level> uses.

Miscellanea:

o Remove an unnecessary OOM message as a dump_stack() is already
  done by the kernel memory subsystem on these allocation failures

Signed-off-by: Joe Perches <joe@...ches.com>
---
 drivers/clocksource/timer-davinci.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
index e421946a91c5..aae938368230 100644
--- a/drivers/clocksource/timer-davinci.c
+++ b/drivers/clocksource/timer-davinci.c
@@ -18,7 +18,7 @@
 #include <clocksource/timer-davinci.h>
 
 #undef pr_fmt
-#define pr_fmt(fmt) "%s: " fmt "\n", __func__
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #define DAVINCI_TIMER_REG_TIM12			0x10
 #define DAVINCI_TIMER_REG_TIM34			0x14
@@ -250,20 +250,20 @@ int __init davinci_timer_register(struct clk *clk,
 
 	rv = clk_prepare_enable(clk);
 	if (rv) {
-		pr_err("Unable to prepare and enable the timer clock");
+		pr_err("Unable to prepare and enable the timer clock\n");
 		return rv;
 	}
 
 	if (!request_mem_region(timer_cfg->reg.start,
 				resource_size(&timer_cfg->reg),
 				"davinci-timer")) {
-		pr_err("Unable to request memory region");
+		pr_err("Unable to request memory region\n");
 		return -EBUSY;
 	}
 
 	base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
 	if (!base) {
-		pr_err("Unable to map the register range");
+		pr_err("Unable to map the register range\n");
 		return -ENOMEM;
 	}
 
@@ -271,10 +271,8 @@ int __init davinci_timer_register(struct clk *clk,
 	tick_rate = clk_get_rate(clk);
 
 	clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL);
-	if (!clockevent) {
-		pr_err("Error allocating memory for clockevent data");
+	if (!clockevent)
 		return -ENOMEM;
-	}
 
 	clockevent->dev.name = "tim12";
 	clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
@@ -298,7 +296,7 @@ int __init davinci_timer_register(struct clk *clk,
 			 davinci_timer_irq_timer, IRQF_TIMER,
 			 "clockevent/tim12", clockevent);
 	if (rv) {
-		pr_err("Unable to request the clockevent interrupt");
+		pr_err("Unable to request the clockevent interrupt\n");
 		return rv;
 	}
 
@@ -325,7 +323,7 @@ int __init davinci_timer_register(struct clk *clk,
 
 	rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
 	if (rv) {
-		pr_err("Unable to register clocksource");
+		pr_err("Unable to register clocksource\n");
 		return rv;
 	}
 
@@ -343,20 +341,20 @@ static int __init of_davinci_timer_register(struct device_node *np)
 
 	rv = of_address_to_resource(np, 0, &timer_cfg.reg);
 	if (rv) {
-		pr_err("Unable to get the register range for timer");
+		pr_err("Unable to get the register range for timer\n");
 		return rv;
 	}
 
 	rv = of_irq_to_resource_table(np, timer_cfg.irq,
 				      DAVINCI_TIMER_NUM_IRQS);
 	if (rv != DAVINCI_TIMER_NUM_IRQS) {
-		pr_err("Unable to get the interrupts for timer");
+		pr_err("Unable to get the interrupts for timer\n");
 		return rv;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Unable to get the timer clock");
+		pr_err("Unable to get the timer clock\n");
 		return PTR_ERR(clk);
 	}