| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1588750940.3262.27.camel@mtksdaap41>
Date: Wed, 6 May 2020 15:42:20 +0800
From: Weiyi Lu <weiyi.lu@...iatek.com>
To: Enric Balletbo Serra <eballetbo@...il.com>
CC: Rob Herring <robh@...nel.org>,
Nicolas Boichat <drinkcat@...omium.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
JamesJJ Liao (廖建智)
<jamesjj.liao@...iatek.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
Fan Chen (陳凡)
<fan.chen@...iatek.com>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
"Sascha Hauer" <kernel@...gutronix.de>,
Matthias Brugger <matthias.bgg@...il.com>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v13 05/11] soc: mediatek: Add multiple step bus
protection control
On Fri, 2020-04-24 at 02:19 +0800, Enric Balletbo Serra wrote:
> Hi Wiyi Lu,
>
> Thank you for your patch.
>
> Missatge de Weiyi Lu <weiyi.lu@...iatek.com> del dia dv., 20 de març
> 2020 a les 8:33:
> >
> > Both MT8183 & MT6765 have more control steps of bus protection
> > than previous project. And there add more bus protection registers
> > reside at infracfg & smi-common.
> > Extend function to support multiple step bus protection control
> > with more customized arguments.
> > And then use bp_table for bus protection of all compatibles,
> > instead of mixing bus_prot_mask and bus_prot_reg_update.
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu@...iatek.com>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 206 ++++++++++++++++++++++++++------------
> > drivers/soc/mediatek/scpsys.h | 42 +++++++-
> > 2 files changed, 182 insertions(+), 66 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index e50a568..a4fb0b23 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -88,9 +88,9 @@
> > * @ctl_offs: The offset for main power control register.
> > * @sram_pdn_bits: The mask for sram power control bits.
> > * @sram_pdn_ack_bits: The mask for sram power control acked bits.
> > - * @bus_prot_mask: The mask for single step bus protection.
> > * @basic_clk_name: The basic clocks required by this power domain.
> > * @caps: The flag for active wake-up action.
> > + * @bp_table: The mask table for multiple step bus protection.
> > */
> > struct scp_domain_data {
> > const char *name;
> > @@ -98,9 +98,9 @@ struct scp_domain_data {
> > int ctl_offs;
> > u32 sram_pdn_bits;
> > u32 sram_pdn_ack_bits;
> > - u32 bus_prot_mask;
> > const char *basic_clk_name[MAX_CLKS];
> > u8 caps;
> > + struct bus_prot bp_table[MAX_STEPS];
> > };
> >
> > struct scp;
> > @@ -124,8 +124,8 @@ struct scp {
> > struct device *dev;
> > void __iomem *base;
> > struct regmap *infracfg;
> > + struct regmap *smi_common;
> > struct scp_ctrl_reg ctrl_reg;
> > - bool bus_prot_reg_update;
> > };
> >
> > struct scp_subdomain {
> > @@ -139,7 +139,6 @@ struct scp_soc_data {
> > const struct scp_subdomain *subdomains;
> > int num_subdomains;
> > const struct scp_ctrl_reg regs;
> > - bool bus_prot_reg_update;
> > };
> >
> > static int scpsys_domain_is_on(struct scp_domain *scpd)
> > @@ -249,53 +248,102 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
> > MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > }
> >
> > +static int set_bus_protection(struct regmap *map, struct bus_prot *bp)
> > +{
> > + u32 val;
> > + u32 set_ofs = bp->set_ofs;
> > + u32 en_ofs = bp->en_ofs;
> > + u32 sta_ofs = bp->sta_ofs;
> > + u32 mask = bp->mask;
>
> Remove unnecessary local variables (set_ofs, en_ofs, sta_ofs and
> mask), and use their bp-> form directly.
>
OK, I'll fix it.
> > +
> > + if (set_ofs)
> > + regmap_write(map, set_ofs, mask);
> > + else
> > + regmap_update_bits(map, en_ofs, mask, mask);
> > +
> > + return regmap_read_poll_timeout(map, sta_ofs,
> > + val, (val & mask) == mask,
> > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > +}
> > +
> > +static int clear_bus_protection(struct regmap *map, struct bus_prot *bp)
> > +{
> > + u32 val;
> > + u32 clr_ofs = bp->clr_ofs;
> > + u32 en_ofs = bp->en_ofs;
> > + u32 sta_ofs = bp->sta_ofs;
> > + u32 mask = bp->mask;
> > + bool ignore_ack = bp->ignore_clr_ack;
>
> Remove unnecessary local variables (clr_ofs, en_ofs, sta_ofs, mask and
> ignore_ack), and use their bp-> form directly.
>
OK, I'll fix it.
> > +
> > + if (clr_ofs)
> > + regmap_write(map, clr_ofs, mask);
> > + else
> > + regmap_update_bits(map, en_ofs, mask, 0);
> > +
> > + if (ignore_ack)
> > + return 0;
> > +
> > + return regmap_read_poll_timeout(map, sta_ofs,
> > + val, !(val & mask),
> > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > +}
> > +
> > static int scpsys_bus_protect_enable(struct scp_domain *scpd)
> > {
> > struct scp *scp = scpd->scp;
> > + const struct bus_prot *bp_table = scpd->data->bp_table;
> > struct regmap *infracfg = scp->infracfg;
> > - u32 mask = scpd->data->bus_prot_mask;
> > - bool reg_update = scp->bus_prot_reg_update;
> > - u32 val;
> > - int ret;
>
> No need to remove ret if you're going to add anyway later.
>
Got it.
> > + struct regmap *smi_common = scp->smi_common;
> > + int i;
> >
> > - if (!mask)
> > - return 0;
> > + for (i = 0; i < MAX_STEPS; i++) {
> > + struct regmap *map = NULL;
>
> Declare this on top of the function and no need to initialize to NUlL
>
Got it.
> > + int ret;
> > + struct bus_prot bp = bp_table[i];
>
> Unneeded local variable ...
>
Actually I followed Nicolas's suggestion in [1]
But, it's okay to me to change it back.
[1] https://patchwork.kernel.org/patch/11304709/
> >
> > - if (reg_update)
> > - regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask,
> > - mask);
> > - else
> > - regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_SET, mask);
> > + if (bp.type == IFR_TYPE)
>
> bp_table[i].type?
>
Got it.
> > + map = infracfg;
> > + else if (bp.type == SMI_TYPE)
>
> ditto
>
Got it.
> > + map = smi_common;
> > + else
> > + break;
>
> So if the type is invalid you break the loop, this is different to
> what you are doing below with the scpsys_bus_protect_protect_disable()
> function where you are "ignoring" instead of beaking the loop. I am
> wondering why? Looks to me that, or you break and print an error
> because something was really wrong? or you ignore in both cases?
>
The bp_table inside the scp_domain_data_mt8183 is static variable with
maximum MAX_STEPS member count. So, for those power domains with less
bus protection steps, invalid type will be used.
> >
> > - ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> > - val, (val & mask) == mask,
> > - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > + ret = set_bus_protection(map, &bp);
> >
> > - return ret;
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > }
> >
> > static int scpsys_bus_protect_disable(struct scp_domain *scpd)
> > {
> > struct scp *scp = scpd->scp;
> > + const struct bus_prot *bp_table = scpd->data->bp_table;
> > struct regmap *infracfg = scp->infracfg;
> > - u32 mask = scpd->data->bus_prot_mask;
> > - bool reg_update = scp->bus_prot_reg_update;
> > - u32 val;
> > - int ret;
> > + struct regmap *smi_common = scp->smi_common;
> > + int i;
> >
> > - if (!mask)
> > - return 0;
> > + for (i = MAX_STEPS - 1; i >= 0; i--) {
> > + struct regmap *map = NULL;
> > + int ret;
> > + struct bus_prot bp = bp_table[i];
>
> The same comments done for scpsys_bus_protect_disable apply here.
>
Got it.
> >
> > - if (reg_update)
> > - regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
> > - else
> > - regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_CLR, mask);
> > + if (bp.type == IFR_TYPE)
> > + map = infracfg;
> > + else if (bp.type == SMI_TYPE)
> > + map = smi_common;
> > + else
> > + continue;
> >
> > - ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> > - val, !(val & mask),
> > - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> > + ret = clear_bus_protection(map, &bp);
> >
> > - return ret;
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > }
> >
> > static int scpsys_power_on(struct generic_pm_domain *genpd)
> > @@ -430,8 +478,7 @@ static int init_basic_clks(struct platform_device *pdev, struct clk **clk,
> >
> > static struct scp *init_scp(struct platform_device *pdev,
> > const struct scp_domain_data *scp_domain_data, int num,
> > - const struct scp_ctrl_reg *scp_ctrl_reg,
> > - bool bus_prot_reg_update)
> > + const struct scp_ctrl_reg *scp_ctrl_reg)
> > {
> > struct genpd_onecell_data *pd_data;
> > struct resource *res;
> > @@ -445,8 +492,6 @@ static struct scp *init_scp(struct platform_device *pdev,
> > scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs;
> > scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs;
> >
> > - scp->bus_prot_reg_update = bus_prot_reg_update;
> > -
> > scp->dev = &pdev->dev;
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > @@ -474,6 +519,17 @@ static struct scp *init_scp(struct platform_device *pdev,
> > return ERR_CAST(scp->infracfg);
> > }
> >
> > + scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> > + "smi_comm");
>
> Hmm, is this property documented? I couldn't find it.
>
Thanks, I'll add in the dt-binding document in PATCH 02.
> > +
> > + if (scp->smi_common == ERR_PTR(-ENODEV)) {
> > + scp->smi_common = NULL;
> > + } else if (IS_ERR(scp->smi_common)) {
> > + dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n",
> > + PTR_ERR(scp->smi_common));
> > + return ERR_CAST(scp->smi_common);
> > + }
> > +
> > for (i = 0; i < num; i++) {
> > struct scp_domain *scpd = &scp->domains[i];
> > const struct scp_domain_data *data = &scp_domain_data[i];
> > @@ -556,8 +612,11 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .name = "conn",
> > .sta_mask = PWR_STATUS_CONN,
> > .ctl_offs = SPM_CONN_PWR_CON,
> > - .bus_prot_mask = MT2701_TOP_AXI_PROT_EN_CONN_M |
> > - MT2701_TOP_AXI_PROT_EN_CONN_S,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT2701_TOP_AXI_PROT_EN_CONN_M |
> > + MT2701_TOP_AXI_PROT_EN_CONN_S),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT2701_POWER_DOMAIN_DISP] = {
> > @@ -566,7 +625,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .ctl_offs = SPM_DIS_PWR_CON,
> > .sram_pdn_bits = GENMASK(11, 8),
> > .basic_clk_name = {"mm"},
> > - .bus_prot_mask = MT2701_TOP_AXI_PROT_EN_MM_M0,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT2701_TOP_AXI_PROT_EN_MM_M0),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT2701_POWER_DOMAIN_MFG] = {
> > @@ -701,7 +763,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .sram_pdn_bits = GENMASK(8, 8),
> > .sram_pdn_ack_bits = GENMASK(16, 16),
> > .basic_clk_name = {"mfg"},
> > - .bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0x260, 0x264, 0x220, 0x228,
> > + BIT(14) | BIT(21) | BIT(23)),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT2712_POWER_DOMAIN_MFG_SC1] = {
> > @@ -773,7 +838,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .sram_pdn_bits = GENMASK(8, 8),
> > .sram_pdn_ack_bits = GENMASK(12, 12),
> > .basic_clk_name = {"mm"},
> > - .bus_prot_mask = (BIT(1) | BIT(2)),
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + BIT(1) | BIT(2)),
> > + },
> > },
> > [MT6797_POWER_DOMAIN_AUDIO] = {
> > .name = "audio",
> > @@ -820,7 +888,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .ctl_offs = SPM_ETHSYS_PWR_CON,
> > .sram_pdn_bits = GENMASK(11, 8),
> > .sram_pdn_ack_bits = GENMASK(15, 12),
> > - .bus_prot_mask = MT7622_TOP_AXI_PROT_EN_ETHSYS,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT7622_TOP_AXI_PROT_EN_ETHSYS),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT7622_POWER_DOMAIN_HIF0] = {
> > @@ -830,7 +901,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .sram_pdn_bits = GENMASK(11, 8),
> > .sram_pdn_ack_bits = GENMASK(15, 12),
> > .basic_clk_name = {"hif_sel"},
> > - .bus_prot_mask = MT7622_TOP_AXI_PROT_EN_HIF0,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT7622_TOP_AXI_PROT_EN_HIF0),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT7622_POWER_DOMAIN_HIF1] = {
> > @@ -840,7 +914,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .sram_pdn_bits = GENMASK(11, 8),
> > .sram_pdn_ack_bits = GENMASK(15, 12),
> > .basic_clk_name = {"hif_sel"},
> > - .bus_prot_mask = MT7622_TOP_AXI_PROT_EN_HIF1,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT7622_TOP_AXI_PROT_EN_HIF1),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT7622_POWER_DOMAIN_WB] = {
> > @@ -849,7 +926,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .ctl_offs = SPM_WB_PWR_CON,
> > .sram_pdn_bits = 0,
> > .sram_pdn_ack_bits = 0,
> > - .bus_prot_mask = MT7622_TOP_AXI_PROT_EN_WB,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT7622_TOP_AXI_PROT_EN_WB),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP | MTK_SCPD_FWAIT_SRAM,
> > },
> > };
> > @@ -863,8 +943,11 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .name = "conn",
> > .sta_mask = PWR_STATUS_CONN,
> > .ctl_offs = SPM_CONN_PWR_CON,
> > - .bus_prot_mask = MT2701_TOP_AXI_PROT_EN_CONN_M |
> > - MT2701_TOP_AXI_PROT_EN_CONN_S,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT2701_TOP_AXI_PROT_EN_CONN_M |
> > + MT2701_TOP_AXI_PROT_EN_CONN_S),
> > + },
> > .caps = MTK_SCPD_ACTIVE_WAKEUP,
> > },
> > [MT7623A_POWER_DOMAIN_ETH] = {
> > @@ -929,8 +1012,11 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .sram_pdn_bits = GENMASK(11, 8),
> > .sram_pdn_ack_bits = GENMASK(12, 12),
> > .basic_clk_name = {"mm"},
> > - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
> > - MT8173_TOP_AXI_PROT_EN_MM_M1,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT8173_TOP_AXI_PROT_EN_MM_M0 |
> > + MT8173_TOP_AXI_PROT_EN_MM_M1),
> > + },
> > },
> > [MT8173_POWER_DOMAIN_VENC_LT] = {
> > .name = "venc_lt",
> > @@ -976,10 +1062,13 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .ctl_offs = SPM_MFG_PWR_CON,
> > .sram_pdn_bits = GENMASK(13, 8),
> > .sram_pdn_ack_bits = GENMASK(21, 16),
> > - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
> > - MT8173_TOP_AXI_PROT_EN_MFG_M0 |
> > - MT8173_TOP_AXI_PROT_EN_MFG_M1 |
> > - MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + MT8173_TOP_AXI_PROT_EN_MFG_S |
> > + MT8173_TOP_AXI_PROT_EN_MFG_M0 |
> > + MT8173_TOP_AXI_PROT_EN_MFG_M1 |
> > + MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT),
> > + },
> > },
> > };
> >
> > @@ -995,7 +1084,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> > },
> > - .bus_prot_reg_update = true,
> > };
> >
> > static const struct scp_soc_data mt2712_data = {
> > @@ -1007,7 +1095,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> > },
> > - .bus_prot_reg_update = false,
> > };
> >
> > static const struct scp_soc_data mt6797_data = {
> > @@ -1019,7 +1106,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS_MT6797,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND_MT6797
> > },
> > - .bus_prot_reg_update = true,
> > };
> >
> > static const struct scp_soc_data mt7622_data = {
> > @@ -1029,7 +1115,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> > },
> > - .bus_prot_reg_update = true,
> > };
> >
> > static const struct scp_soc_data mt7623a_data = {
> > @@ -1039,7 +1124,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> > },
> > - .bus_prot_reg_update = true,
> > };
> >
> > static const struct scp_soc_data mt8173_data = {
> > @@ -1051,7 +1135,6 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .pwr_sta_offs = SPM_PWR_STATUS,
> > .pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> > },
> > - .bus_prot_reg_update = true,
> > };
> >
> > /*
> > @@ -1092,8 +1175,7 @@ static int scpsys_probe(struct platform_device *pdev)
> >
> > soc = of_device_get_match_data(&pdev->dev);
> >
> > - scp = init_scp(pdev, soc->domains, soc->num_domains, &soc->regs,
> > - soc->bus_prot_reg_update);
> > + scp = init_scp(pdev, soc->domains, soc->num_domains, &soc->regs);
> > if (IS_ERR(scp))
> > return PTR_ERR(scp);
> >
> > diff --git a/drivers/soc/mediatek/scpsys.h b/drivers/soc/mediatek/scpsys.h
> > index ad2559b..45bc644 100644
> > --- a/drivers/soc/mediatek/scpsys.h
> > +++ b/drivers/soc/mediatek/scpsys.h
> > @@ -2,10 +2,28 @@
> > #ifndef __SOC_MEDIATEK_SCPSYS_H
> > #define __SOC_MEDIATEK_SCPSYS_H
> >
> > -#define INFRA_TOPAXI_PROTECTEN 0x0220
> > -#define INFRA_TOPAXI_PROTECTSTA1 0x0228
> > -#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
> > -#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
> > +#define MAX_STEPS 4
> > +
> > +#define _BUS_PROT(_type, _set_ofs, _clr_ofs, \
> > + _en_ofs, _sta_ofs, _mask, _ignore_clr_ack) { \
> > + .type = _type, \
> > + .set_ofs = _set_ofs, \
> > + .clr_ofs = _clr_ofs, \
> > + .en_ofs = _en_ofs, \
> > + .sta_ofs = _sta_ofs, \
> > + .mask = _mask, \
> > + .ignore_clr_ack = _ignore_clr_ack, \
> > + }
> > +
> > +#define BUS_PROT(_type, _set_ofs, _clr_ofs, \
> > + _en_ofs, _sta_ofs, _mask) \
> > + _BUS_PROT(_type, _set_ofs, _clr_ofs, \
> > + _en_ofs, _sta_ofs, _mask, false)
> > +
> > +#define BUS_PROT_IGN(_type, _set_ofs, _clr_ofs, \
> > + _en_ofs, _sta_ofs, _mask) \
> > + _BUS_PROT(_type, _set_ofs, _clr_ofs, \
> > + _en_ofs, _sta_ofs, _mask, true)
> >
> > #define MT2701_TOP_AXI_PROT_EN_MM_M0 BIT(1)
> > #define MT2701_TOP_AXI_PROT_EN_CONN_M BIT(2)
> > @@ -25,4 +43,20 @@
> > #define MT8173_TOP_AXI_PROT_EN_MFG_M1 BIT(22)
> > #define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT BIT(23)
> >
> > +enum regmap_type {
> > + INVALID_TYPE = 0,
>
> I didn't see any use of that type, is this an option?
>
Answered above.
>
> > + IFR_TYPE,
> > + SMI_TYPE,
> > +};
> > +
> > +struct bus_prot {
> > + enum regmap_type type;
> > + u32 set_ofs;
> > + u32 clr_ofs;
> > + u32 en_ofs;
> > + u32 sta_ofs;
> > + u32 mask;
> > + bool ignore_clr_ack;
> > +};
> > +
> > #endif /* __SOC_MEDIATEK_SCPSYS_H */
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists