lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 6 May 2020 16:57:57 +0100
From:   Charles Keepax <ckeepax@...nsource.cirrus.com>
To:     <cw00.choi@...sung.com>, <robh+dt@...nel.org>,
        <lee.jones@...aro.org>, <linus.walleij@...aro.org>,
        <broonie@...nel.org>
CC:     <myungjoo.ham@...sung.com>, <lgirdwood@...il.com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <patches@...nsource.cirrus.com>
Subject: [PATCH v2 6/7] pinctrl: madera: Move binding over to dtschema

Signed-off-by: Charles Keepax <ckeepax@...nsource.cirrus.com>
---

New since v1, putting in the same series as Arizona since they share the
same regulator binding.

Thanks,
Charles

 .../bindings/pinctrl/cirrus,madera-pinctrl.txt     |  99 --------------
 .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 147 +++++++++++++++++++++
 2 files changed, 147 insertions(+), 99 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
deleted file mode 100644
index b0e36cf0d289e..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Cirrus Logic Madera class audio codecs pinctrl driver
-
-The Cirrus Logic Madera codecs provide a number of GPIO functions for
-interfacing to external hardware and to provide logic outputs to other devices.
-Certain groups of GPIO pins also have an alternate function, normally as an
-audio interface.
-
-The set of available GPIOs, functions and alternate function groups differs
-between codecs so refer to the datasheet for the codec for further information
-on what is supported on that device.
-
-The properties for this driver exist within the parent MFD driver node.
-
-See also
-  the core bindings for the parent MFD driver:
-    Documentation/devicetree/bindings/mfd/madera.txt
-
-  the generic pinmix bindings:
-    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Required properties of parent mfd node:
-  - pinctrl-names : must be "default"
-  - pinctrl-0 : a phandle to the node containing the subnodes containing default
-      configurations
-
-Required subnodes:
-  One subnode is required to contain the default settings. It contains an
-  arbitrary number of configuration subnodes, one for each group or pin
-  configuration you want to apply as a default.
-
-Required properties of configuration subnodes:
-  - groups : name of one pin group to configure. One of:
-	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
-	dmic4, dmic5, dmic6,
-	gpio1, gpio2, ..., gpio40
-    The gpioN groups select the single pin of this name for configuration
-
-Optional properties of configuration subnodes:
-  Any configuration option not explicitly listed in the dts will be left at
-  chip default setting.
-
-  - function : name of function to assign to this group. One of:
-	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
-	dmic3, dmic4, dmic5, dmic6,
-	io, dsp-gpio, irq1, irq2,
-	fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock,
-	fllao-clk, fllao-lock,
-	opclk, opclk-async, pwm1, pwm2, spdif,
-	asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
-	spkl-short-circuit, spkr-short-circuit, spk-shutdown,
-	spk-overheat-shutdown, spk-overheat-warn,
-	timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts,
-	timer7-sts, timer8-sts,
-	log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne,
-	log6-fifo-ne, log7-fifo-ne, log8-fifo-ne,
-
-  - bias-disable : disable pull-up and pull-down
-  - bias-bus-hold : enable buskeeper
-  - bias-pull-up : output is pulled-up
-  - bias-pull-down : output is pulled-down
-  - drive-push-pull : CMOS output
-  - drive-open-drain : open-drain output
-  - drive-strength : drive strength in mA. Valid values are 4 or 8
-  - input-schmitt-enable : enable schmitt-trigger mode
-  - input-schmitt-disable : disable schmitt-trigger mode
-  - input-debounce : A value of 0 disables debounce, a value !=0 enables
-	debounce
-  - output-low : set the pin to output mode with low level
-  - output-high : set the pin to output mode with high level
-
-Example:
-
-cs47l85@0 {
-	compatible = "cirrus,cs47l85";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cs47l85_defaults>;
-
-	cs47l85_defaults: cs47l85-gpio-defaults {
-		aif1 {
-			groups = "aif1";
-			function = "aif1";
-			bias-bus-hold;
-		};
-
-		aif2 {
-			groups = "aif2";
-			function = "aif2";
-			bias-bus-hold;
-		};
-
-		opclk {
-			groups = "gpio1";
-			function = "opclk";
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
new file mode 100644
index 0000000000000..07a13429ca6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs pinctrl driver
+
+maintainers:
+  - patches@...nsource.cirrus.com
+
+description: |
+  The Cirrus Logic Madera codecs provide a number of GPIO functions for
+  interfacing to external hardware and to provide logic outputs to other devices.
+  Certain groups of GPIO pins also have an alternate function, normally as an
+  audio interface.
+
+  The set of available GPIOs, functions and alternate function groups differs
+  between CODECs so refer to the datasheet for the CODEC for further information
+  on what is supported on that device.
+
+  The properties for this driver exist within the parent MFD driver node.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  And the generic pinmix bindings:
+
+    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+  pinctrl-0:
+    description:
+      A phandle to the node containing the subnodes containing default
+      configurations.
+
+  pinctrl-names:
+    description:
+      A pinctrl state named "default" must be defined.
+    const: default
+
+patternProperties:
+  '^.*-pins$':
+    description:
+      One subnode is required to contain the default settings. It
+      contains an arbitrary number of configuration subnodes, one for
+      each group or pin configuration you want to apply as a default.
+    patternProperties:
+      '^.*-pin$':
+        type: object
+        allOf:
+          - $ref: "pincfg-node.yaml#"
+          - $ref: "pinmux-node.yaml#"
+        properties:
+          groups:
+            description:
+              Name of one pin group to configure.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
+                    pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
+                    gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9,
+                    gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
+                    gpio16, gpio17, gpio17, gpio18, gpio19, gpio20,
+                    gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
+                    gpio27, gpio27, gpio28, gpio29, gpio30, gpio31,
+                    gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+                    gpio37, gpio38, gpio39 ]
+
+          function:
+            description:
+              Name of function to assign to this group.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
+                    pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
+                    dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
+                    fll1-lock, fll2-clk, fll2-lock, fll3-clk,
+                    fll3-lock, fllao-clk, fllao-lock, opclk,
+                    opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
+                    asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+                    spkl-short-circuit, spkr-short-circuit,
+                    spk-shutdown, spk-overheat-shutdown,
+                    spk-overheat-warn, timer1-sts, timer2-sts,
+                    timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+                    timer7-sts, timer8-sts, log1-fifo-ne,
+                    log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
+                    log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
+                    log8-fifo-ne ]
+
+          bias-disable:
+            description:
+              Disable pull-up and pull-down.
+
+          bias-bus-hold:
+            description:
+              Enable buskeeper.
+
+          bias-pull-up:
+            description:
+              Output is pulled-up.
+
+          bias-pull-down:
+            description:
+              Output is pulled-down.
+
+          drive-push-pull:
+            description:
+              CMOS output.
+
+          drive-open-drain:
+            description:
+              Open-drain output.
+
+          drive-strength:
+            description:
+              Drive strength in mA.
+            enum: [ 4, 8 ]
+
+          input-schmitt-enable:
+            description:
+              Enable schmitt-trigger mode.
+
+          input-schmitt-disable:
+            description:
+              Disable schmitt-trigger mode.
+
+          input-debounce:
+            description:
+              A zero value disables debounce, non-zero value enables
+              debounce.
+
+          output-low:
+            description:
+              Set the pin to output mode with low level.
+
+          output-high:
+            description:
+              Set the pin to output mode with high level.
+
+        additionalProperties: false
+
+        required:
+          - groups
+
+    additionalProperties: false
+
+required:
+  - pinctrl-0
+  - pinctrl-names
-- 
2.11.0

Powered by blists - more mailing lists