lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 6 May 2020 10:58:26 -0500
From:   Eddie James <eajames@...ux.vnet.ibm.com>
To:     Guenter Roeck <linux@...ck-us.net>,
        Eddie James <eajames@...ux.ibm.com>
Cc:     linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
        linux-fsi@...ts.ozlabs.org, devicetree@...r.kernel.org,
        jdelvare@...e.com, alistair@...ple.id.au, joel@....id.au,
        jk@...abs.org, robh+dt@...nel.org
Subject: Re: [PATCH 3/3] hwmon: (occ) Add new temperature sensor type


On 5/6/20 10:57 AM, Guenter Roeck wrote:
> On Fri, May 01, 2020 at 10:08:33AM -0500, Eddie James wrote:
>> The latest version of the On-Chip Controller (OCC) has a different
>> format for the temperature sensor data. Add a new temperature sensor
>> version to handle this data.
>>
>> Signed-off-by: Eddie James <eajames@...ux.ibm.com>
> For my reference:
>
> Acked-by: Guenter Roeck <linux@...ck-us.net>
>
> I assume this depends on at least patch 2 of the series, so we'll have
> to wait for that to be accepted.


Thanks Guenter. Yes that's correct.

Eddie


>
> Guenter
>
>> ---
>>   drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 75 insertions(+)
>>
>> diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
>> index 30e18eb60da7..52af0e728232 100644
>> --- a/drivers/hwmon/occ/common.c
>> +++ b/drivers/hwmon/occ/common.c
>> @@ -41,6 +41,14 @@ struct temp_sensor_2 {
>>   	u8 value;
>>   } __packed;
>>   
>> +struct temp_sensor_10 {
>> +	u32 sensor_id;
>> +	u8 fru_type;
>> +	u8 value;
>> +	u8 throttle;
>> +	u8 reserved;
>> +} __packed;
>> +
>>   struct freq_sensor_1 {
>>   	u16 sensor_id;
>>   	u16 value;
>> @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev,
>>   	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
>>   }
>>   
>> +static ssize_t occ_show_temp_10(struct device *dev,
>> +				struct device_attribute *attr, char *buf)
>> +{
>> +	int rc;
>> +	u32 val = 0;
>> +	struct temp_sensor_10 *temp;
>> +	struct occ *occ = dev_get_drvdata(dev);
>> +	struct occ_sensors *sensors = &occ->sensors;
>> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
>> +
>> +	rc = occ_update_response(occ);
>> +	if (rc)
>> +		return rc;
>> +
>> +	temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index;
>> +
>> +	switch (sattr->nr) {
>> +	case 0:
>> +		val = get_unaligned_be32(&temp->sensor_id);
>> +		break;
>> +	case 1:
>> +		val = temp->value;
>> +		if (val == OCC_TEMP_SENSOR_FAULT)
>> +			return -EREMOTEIO;
>> +
>> +		/*
>> +		 * VRM doesn't return temperature, only alarm bit. This
>> +		 * attribute maps to tempX_alarm instead of tempX_input for
>> +		 * VRM
>> +		 */
>> +		if (temp->fru_type != OCC_FRU_TYPE_VRM) {
>> +			/* sensor not ready */
>> +			if (val == 0)
>> +				return -EAGAIN;
>> +
>> +			val *= 1000;
>> +		}
>> +		break;
>> +	case 2:
>> +		val = temp->fru_type;
>> +		break;
>> +	case 3:
>> +		val = temp->value == OCC_TEMP_SENSOR_FAULT;
>> +		break;
>> +	case 4:
>> +		val = temp->throttle * 1000;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
>> +}
>> +
>>   static ssize_t occ_show_freq_1(struct device *dev,
>>   			       struct device_attribute *attr, char *buf)
>>   {
>> @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ)
>>   		num_attrs += (sensors->temp.num_sensors * 4);
>>   		show_temp = occ_show_temp_2;
>>   		break;
>> +	case 0x10:
>> +		num_attrs += (sensors->temp.num_sensors * 5);
>> +		show_temp = occ_show_temp_10;
>> +		break;
>>   	default:
>>   		sensors->temp.num_sensors = 0;
>>   	}
>> @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ)
>>   			attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
>>   						     show_temp, NULL, 3, i);
>>   			attr++;
>> +
>> +			if (sensors->temp.version == 0x10) {
>> +				snprintf(attr->name, sizeof(attr->name),
>> +					 "temp%d_max", s);
>> +				attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
>> +							     show_temp, NULL,
>> +							     4, i);
>> +				attr++;
>> +			}
>>   		}
>>   	}
>>   

Powered by blists - more mailing lists