linux-kernel - [PATCH v7 1/5] usb: xhci: Change the XHCI link order in the Makefile

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200507173408.20754-2-alcooperx@gmail.com>
Date:   Thu,  7 May 2020 13:34:04 -0400
From:   Al Cooper <alcooperx@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     Al Cooper <alcooperx@...il.com>,
        Alan Stern <stern@...land.harvard.edu>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        linux-usb@...r.kernel.org, Mathias Nyman <mathias.nyman@...el.com>,
        Rob Herring <robh+dt@...nel.org>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v7 1/5] usb: xhci: Change the XHCI link order in the Makefile

Some BRCMSTB USB chips have an XHCI, EHCI and OHCI controller
on the same port where XHCI handles 3.0 devices, EHCI handles 2.0
devices and OHCI handles <2.0 devices. Currently the Makefile
has XHCI linking at the bottom which will result in the XHIC driver
initalizing after the EHCI and OHCI drivers and any installed 3.0
device will be seen as a 2.0 device. Moving the XHCI linking
above the EHCI and OHCI linking fixes the issue.

Signed-off-by: Al Cooper <alcooperx@...il.com>
---
 drivers/usb/host/Makefile | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b191361257cc..a7f0b8ff7179 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -37,6 +37,16 @@ endif
 
 obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
 
+# NOTE: BRCMSTB systems require that xhci driver be linked before the
+# ehci/ohci drivers because they share a port and need the XHCI driver
+# to come up first to properly enumerate 3.0 devices.
+obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
+obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
+obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+obj-$(CONFIG_USB_XHCI_HISTB)	+= xhci-histb.o
+obj-$(CONFIG_USB_XHCI_MTK)	+= xhci-mtk.o
+obj-$(CONFIG_USB_XHCI_TEGRA)	+= xhci-tegra.o
+
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
@@ -69,12 +79,6 @@ obj-$(CONFIG_USB_OHCI_HCD_DAVINCI)	+= ohci-da8xx.o
 
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
-obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
-obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
-obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
-obj-$(CONFIG_USB_XHCI_HISTB)	+= xhci-histb.o
-obj-$(CONFIG_USB_XHCI_MTK)	+= xhci-mtk.o
-obj-$(CONFIG_USB_XHCI_TEGRA)	+= xhci-tegra.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
-- 
2.17.1