[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200507193353.GA21821@bogus>
Date: Thu, 7 May 2020 14:33:53 -0500
From: Rob Herring <robh@...nel.org>
To: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Andrew Murray <andrew.murray@....com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Mark Rutland <mark.rutland@....com>, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH v3 2/2] PCI: uniphier: Add Socionext UniPhier Pro5 PCIe
endpoint controller driver
On Mon, Mar 23, 2020 at 06:40:54PM +0900, Kunihiko Hayashi wrote:
> Add driver for the Socionext UniPhier Pro5 SoC endpoint controller.
> This controller is based on the DesignWare PCIe core.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
> ---
> MAINTAINERS | 2 +-
> drivers/pci/controller/dwc/Kconfig | 13 +-
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-uniphier-ep.c | 380 ++++++++++++++++++++++++++
> 4 files changed, 393 insertions(+), 3 deletions(-)
> create mode 100644 drivers/pci/controller/dwc/pcie-uniphier-ep.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 01a4631..95d296b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13152,7 +13152,7 @@ M: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
> L: linux-pci@...r.kernel.org
> S: Maintained
> F: Documentation/devicetree/bindings/pci/uniphier-pcie*.txt
> -F: drivers/pci/controller/dwc/pcie-uniphier.c
> +F: drivers/pci/controller/dwc/pcie-uniphier*.c
>
> PCIE DRIVER FOR ST SPEAR13XX
> M: Pratyush Anand <pratyush.anand@...il.com>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 169cde5..4dd5ba9 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -282,15 +282,24 @@ config PCIE_TEGRA194_EP
> selected. This uses the DesignWare core.
>
> config PCIE_UNIPHIER
> - bool "Socionext UniPhier PCIe controllers"
> + bool "Socionext UniPhier PCIe host controllers"
> depends on ARCH_UNIPHIER || COMPILE_TEST
> depends on OF && HAS_IOMEM
> depends on PCI_MSI_IRQ_DOMAIN
> select PCIE_DW_HOST
> help
> - Say Y here if you want PCIe controller support on UniPhier SoCs.
> + Say Y here if you want PCIe host controller support on UniPhier SoCs.
> This driver supports LD20 and PXs3 SoCs.
>
> +config PCIE_UNIPHIER_EP
> + bool "Socionext UniPhier PCIe endpoint controllers"
> + depends on ARCH_UNIPHIER || COMPILE_TEST
> + depends on OF && HAS_IOMEM
> + select PCIE_DW_EP
> + help
> + Say Y here if you want PCIe endpoint controller support on
> + UniPhier SoCs. This driver supports Pro5 SoC.
> +
> config PCIE_AL
> bool "Amazon Annapurna Labs PCIe controller"
> depends on OF && (ARM64 || COMPILE_TEST)
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 8a637cf..a751553 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
> obj-$(CONFIG_PCI_MESON) += pci-meson.o
> obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> +obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
> new file mode 100644
> index 0000000..71db49f
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe endpoint controller driver for UniPhier SoCs
> + * Copyright 2018 Socionext Inc.
> + * Author: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/of_device.h>
> +#include <linux/pci.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "pcie-designware.h"
> +
> +/* Link Glue registers */
> +#define PCL_RSTCTRL0 0x0010
> +#define PCL_RSTCTRL_AXI_REG BIT(3)
> +#define PCL_RSTCTRL_AXI_SLAVE BIT(2)
> +#define PCL_RSTCTRL_AXI_MASTER BIT(1)
> +#define PCL_RSTCTRL_PIPE3 BIT(0)
> +
> +#define PCL_RSTCTRL1 0x0020
> +#define PCL_RSTCTRL_PERST BIT(0)
> +
> +#define PCL_RSTCTRL2 0x0024
> +#define PCL_RSTCTRL_PHY_RESET BIT(0)
> +
> +#define PCL_MODE 0x8000
> +#define PCL_MODE_REGEN BIT(8)
> +#define PCL_MODE_REGVAL BIT(0)
> +
> +#define PCL_APP_CLK_CTRL 0x8004
> +#define PCL_APP_CLK_REQ BIT(0)
> +
> +#define PCL_APP_READY_CTRL 0x8008
> +#define PCL_APP_LTSSM_ENABLE BIT(0)
> +
> +#define PCL_APP_MSI0 0x8040
> +#define PCL_APP_VEN_MSI_TC_MASK GENMASK(10, 8)
> +#define PCL_APP_VEN_MSI_VECTOR_MASK GENMASK(4, 0)
> +
> +#define PCL_APP_MSI1 0x8044
> +#define PCL_APP_MSI_REQ BIT(0)
> +
> +#define PCL_APP_INTX 0x8074
> +#define PCL_APP_INTX_SYS_INT BIT(0)
> +
> +/* assertion time of INTx in usec */
> +#define PCL_INTX_WIDTH_USEC 30
> +
> +struct uniphier_pcie_ep_priv {
> + void __iomem *base;
> + struct dw_pcie pci;
> + struct clk *clk, *clk_gio;
> + struct reset_control *rst, *rst_gio;
> + struct phy *phy;
> + const struct pci_epc_features *features;
> +};
> +
> +#define to_uniphier_pcie(x) dev_get_drvdata((x)->dev)
> +
> +static void uniphier_pcie_ltssm_enable(struct uniphier_pcie_ep_priv *priv,
> + bool enable)
> +{
> + u32 val;
> +
> + val = readl(priv->base + PCL_APP_READY_CTRL);
> + if (enable)
> + val |= PCL_APP_LTSSM_ENABLE;
> + else
> + val &= ~PCL_APP_LTSSM_ENABLE;
> + writel(val, priv->base + PCL_APP_READY_CTRL);
> +}
> +
> +static void uniphier_pcie_phy_reset(struct uniphier_pcie_ep_priv *priv,
> + bool assert)
> +{
> + u32 val;
> +
> + val = readl(priv->base + PCL_RSTCTRL2);
> + if (assert)
> + val |= PCL_RSTCTRL_PHY_RESET;
> + else
> + val &= ~PCL_RSTCTRL_PHY_RESET;
> + writel(val, priv->base + PCL_RSTCTRL2);
> +}
> +
> +static void uniphier_pcie_init_ep(struct uniphier_pcie_ep_priv *priv)
> +{
> + u32 val;
> +
> + /* set EP mode */
> + val = readl(priv->base + PCL_MODE);
> + val |= PCL_MODE_REGEN | PCL_MODE_REGVAL;
> + writel(val, priv->base + PCL_MODE);
> +
> + /* clock request */
> + val = readl(priv->base + PCL_APP_CLK_CTRL);
> + val &= ~PCL_APP_CLK_REQ;
> + writel(val, priv->base + PCL_APP_CLK_CTRL);
> +
> + /* deassert PIPE3 and AXI reset */
> + val = readl(priv->base + PCL_RSTCTRL0);
> + val |= PCL_RSTCTRL_AXI_REG | PCL_RSTCTRL_AXI_SLAVE
> + | PCL_RSTCTRL_AXI_MASTER | PCL_RSTCTRL_PIPE3;
> + writel(val, priv->base + PCL_RSTCTRL0);
> +
> + uniphier_pcie_ltssm_enable(priv, false);
> +
> + msleep(100);
> +}
> +
> +static int uniphier_pcie_start_link(struct dw_pcie *pci)
> +{
> + struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
> +
> + uniphier_pcie_ltssm_enable(priv, true);
> +
> + return 0;
> +}
> +
> +static void uniphier_pcie_stop_link(struct dw_pcie *pci)
> +{
> + struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
> +
> + uniphier_pcie_ltssm_enable(priv, false);
> +}
> +
> +static void uniphier_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + enum pci_barno bar;
> +
> + for (bar = BAR_0; bar <= BAR_5; bar++)
> + dw_pcie_ep_reset_bar(pci, bar);
> +}
> +
> +static int uniphier_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
> + u32 val;
> +
> + /* assert INTx */
> + val = readl(priv->base + PCL_APP_INTX);
> + val |= PCL_APP_INTX_SYS_INT;
> + writel(val, priv->base + PCL_APP_INTX);
> +
> + udelay(PCL_INTX_WIDTH_USEC);
What happens if you are preempted here?
> +
> + /* deassert INTx */
> + val &= ~PCL_APP_INTX_SYS_INT;
> + writel(val, priv->base + PCL_APP_INTX);
Any locking needed around this RMWW?
Aren't PCI legacy interrupts level triggered and this should only be
cleared when the cause is masked?
> +
> + return 0;
> +}
> +
> +static int uniphier_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep,
> + u8 func_no, u16 interrupt_num)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
> + u32 val;
> +
> + val = FIELD_PREP(PCL_APP_VEN_MSI_TC_MASK, func_no)
> + | FIELD_PREP(PCL_APP_VEN_MSI_VECTOR_MASK, interrupt_num - 1);
> + writel(val, priv->base + PCL_APP_MSI0);
> +
> + val = readl(priv->base + PCL_APP_MSI1);
> + val |= PCL_APP_MSI_REQ;
> + writel(val, priv->base + PCL_APP_MSI1);
> +
> + return 0;
> +}
> +
> +static int uniphier_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> + enum pci_epc_irq_type type,
> + u16 interrupt_num)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> + switch (type) {
> + case PCI_EPC_IRQ_LEGACY:
> + return uniphier_pcie_ep_raise_legacy_irq(ep);
> + case PCI_EPC_IRQ_MSI:
> + return uniphier_pcie_ep_raise_msi_irq(ep, func_no,
> + interrupt_num);
> + default:
> + dev_err(pci->dev, "UNKNOWN IRQ type (%d)\n", type);
> + }
> +
> + return 0;
> +}
> +
> +static const struct pci_epc_features*
> +uniphier_pcie_get_features(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
> +
> + return priv->features;
> +}
> +
> +static const struct dw_pcie_ep_ops uniphier_pcie_ep_ops = {
> + .ep_init = uniphier_pcie_ep_init,
> + .raise_irq = uniphier_pcie_ep_raise_irq,
> + .get_features = uniphier_pcie_get_features,
> +};
> +
> +static int uniphier_add_pcie_ep(struct uniphier_pcie_ep_priv *priv,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = &priv->pci;
> + struct dw_pcie_ep *ep = &pci->ep;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + int ret;
> +
> + ep->ops = &uniphier_pcie_ep_ops;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2");
> + pci->dbi_base2 = devm_ioremap_resource(dev, res);
devm_ioremap_resource_byname
> + if (IS_ERR(pci->dbi_base2))
> + return PTR_ERR(pci->dbi_base2);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> + if (!res)
> + return -EINVAL;
> +
> + ep->phys_base = res->start;
> + ep->addr_size = resource_size(res);
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret)
> + dev_err(dev, "Failed to initialize endpoint (%d)\n", ret);
> +
> + return ret;
> +}
> +
> +static int uniphier_pcie_ep_enable(struct uniphier_pcie_ep_priv *priv)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(priv->clk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(priv->clk_gio);
> + if (ret)
> + goto out_clk_disable;
> +
> + ret = reset_control_deassert(priv->rst);
> + if (ret)
> + goto out_clk_gio_disable;
> +
> + ret = reset_control_deassert(priv->rst_gio);
> + if (ret)
> + goto out_rst_assert;
> +
> + uniphier_pcie_init_ep(priv);
> +
> + uniphier_pcie_phy_reset(priv, true);
> +
> + ret = phy_init(priv->phy);
> + if (ret)
> + goto out_rst_gio_assert;
> +
> + uniphier_pcie_phy_reset(priv, false);
> +
> + return 0;
> +
> +out_rst_gio_assert:
> + reset_control_assert(priv->rst_gio);
> +out_rst_assert:
> + reset_control_assert(priv->rst);
> +out_clk_gio_disable:
> + clk_disable_unprepare(priv->clk_gio);
> +out_clk_disable:
> + clk_disable_unprepare(priv->clk);
> +
> + return ret;
> +}
> +
> +static const struct dw_pcie_ops dw_pcie_ops = {
> + .start_link = uniphier_pcie_start_link,
> + .stop_link = uniphier_pcie_stop_link,
> +};
> +
> +static int uniphier_pcie_ep_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct uniphier_pcie_ep_priv *priv;
> + struct resource *res;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->features = of_device_get_match_data(dev);
> + if (WARN_ON(!priv->features))
> + return -EINVAL;
> +
> + priv->pci.dev = dev;
> + priv->pci.ops = &dw_pcie_ops;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> + priv->pci.dbi_base = devm_pci_remap_cfg_resource(dev, res);
> + if (IS_ERR(priv->pci.dbi_base))
> + return PTR_ERR(priv->pci.dbi_base);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "link");
> + priv->base = devm_ioremap_resource(dev, res);
devm_ioremap_resource_byname()
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->clk_gio = devm_clk_get(dev, "gio");
> + if (IS_ERR(priv->clk))
> + return PTR_ERR(priv->clk);
> +
> + priv->rst_gio = devm_reset_control_get_shared(dev, "gio");
> + if (IS_ERR(priv->rst_gio))
> + return PTR_ERR(priv->rst_gio);
> +
> + priv->clk = devm_clk_get(dev, "link");
> + if (IS_ERR(priv->clk))
> + return PTR_ERR(priv->clk);
> +
> + priv->rst = devm_reset_control_get_shared(dev, "link");
> + if (IS_ERR(priv->rst))
> + return PTR_ERR(priv->rst);
> +
> + priv->phy = devm_phy_optional_get(dev, "pcie-phy");
> + if (IS_ERR(priv->phy)) {
> + ret = PTR_ERR(priv->phy);
> + dev_err(dev, "Failed to get phy (%d)\n", ret);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = uniphier_pcie_ep_enable(priv);
> + if (ret)
> + return ret;
> +
> + return uniphier_add_pcie_ep(priv, pdev);
> +}
> +
> +static const struct pci_epc_features uniphier_pro5_data = {
> + .linkup_notifier = false,
> + .msi_capable = true,
> + .msix_capable = false,
> + .align = 1 << 16,
> + .bar_fixed_64bit = BIT(BAR_0) | BIT(BAR_2) | BIT(BAR_4),
> + .reserved_bar = BIT(BAR_4),
> +};
> +
> +static const struct of_device_id uniphier_pcie_ep_match[] = {
> + {
> + .compatible = "socionext,uniphier-pro5-pcie-ep",
> + .data = &uniphier_pro5_data,
> + },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver uniphier_pcie_ep_driver = {
> + .probe = uniphier_pcie_ep_probe,
> + .driver = {
> + .name = "uniphier-pcie-ep",
> + .of_match_table = uniphier_pcie_ep_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(uniphier_pcie_ep_driver);
Why not a module?
Powered by blists - more mailing lists