linux-kernel - [PATCH v5 2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200507143354.v5.2.I1976736b400a3b30e46efa47782248b86b3bc627@changeid>
Date:   Thu,  7 May 2020 14:34:56 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     linus.walleij@...aro.org, bgolaszewski@...libre.com,
        airlied@...ux.ie, daniel@...ll.ch, robh+dt@...nel.org,
        narmstrong@...libre.com, a.hajda@...sung.com,
        Laurent.pinchart@...asonboard.com, spanda@...eaurora.org
Cc:     jonas@...boo.se, jeffrey.l.hugo@...il.com,
        linux-gpio@...r.kernel.org, bjorn.andersson@...aro.org,
        swboyd@...omium.org, jernej.skrabec@...l.net,
        devicetree@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        linux-arm-msm@...r.kernel.org, robdclark@...omium.org,
        Douglas Anderson <dianders@...omium.org>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Sam Ravnborg <sam@...nborg.org>,
        Thierry Reding <thierry.reding@...il.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v5 2/6] dt-bindings: display: Add hpd-gpios to panel-common bindings

In the cases where there is no connector in a system there's no great
place to put "hpd-gpios".  As per discussion [1] the best place to put
it is in the panel.  Add this to the device tree bindings.

[1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com

Signed-off-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- ("dt-bindings: display: Add hpd-gpios to panel-common...") new for v2

 .../devicetree/bindings/display/panel/panel-common.yaml     | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ed051ba12084..e9a04a3a4f5f 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -96,6 +96,12 @@ properties:
       (hot plug detect) signal, but the signal isn't hooked up so we should
       hardcode the max delay from the panel spec when powering up the panel.
 
+  hpd-gpios:
+    maxItems: 1
+    description:
+      If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+      than a dedicated HPD pin the pin can be specified here.
+
   # Control I/Os
 
   # Many display panels can be controlled through pins driven by GPIOs. The nature
-- 
2.26.2.645.ge9eca65c58-goog