linux-kernel - Re: [PATCH net v2] net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <cf07fae3-bd8f-a645-0007-a317832c51c1@samsung.com>
Date:   Thu, 7 May 2020 11:46:58 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Doug Berger <opendmb@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Stefan Wahren <wahrenst@....net>
Cc:     bcm-kernel-feedback-list@...adcom.com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net v2] net: bcmgenet: Clear ID_MODE_DIS in
 EXT_RGMII_OOB_CTRL when not needed

Hi

On 25.02.2020 14:11, Nicolas Saenz Julienne wrote:
> Outdated Raspberry Pi 4 firmware might configure the external PHY as
> rgmii although the kernel currently sets it as rgmii-rxid. This makes
> connections unreliable as ID_MODE_DIS is left enabled. To avoid this,
> explicitly clear that bit whenever we don't need it.
>
> Fixes: da38802211cc ("net: bcmgenet: Add RGMII_RXID support")
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>

I've finally bisected the network issue I have on my RPi4 used for 
testing mainline builds. The bisect pointed to this patch. Once it got 
applied in v5.7-rc1, the networking is broken on my RPi4 in ARM32bit 
mode and kernel compiled from bcm2835_defconfig. I'm using u-boot to 
tftp zImage/dtb/initrd there. After reverting this patch network is 
working fine again. The strange thing is that networking works fine if 
kernel is compiled from multi_v7_defconfig but I don't see any obvious 
difference there.

I'm not sure if u-boot is responsible for this break, but kernel 
definitely should be able to properly reset the hardware to the valid state.

I can provide more information, just let me know what is needed. Here is 
the log, I hope it helps:

[   11.881784] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full 
- flow control off
[   11.889935] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

root@...get:~# ping host
PING host (192.168.100.1) 56(84) bytes of data.
 From 192.168.100.53 icmp_seq=1 Destination Host Unreachable
...

> ---
>
> Changes since v1:
>   - Fix tags ordering
>   - Add targeted tree
>
>   drivers/net/ethernet/broadcom/genet/bcmmii.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
> index 6392a2530183..10244941a7a6 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
> @@ -294,6 +294,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
>   	 */
>   	if (priv->ext_phy) {
>   		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
> +		reg &= ~ID_MODE_DIS;
>   		reg |= id_mode_dis;
>   		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
>   			reg |= RGMII_MODE_EN_V123;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland