[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200507124556.1774311-1-bryan.odonoghue@linaro.org>
Date: Thu, 7 May 2020 13:45:55 +0100
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: heikki.krogerus@...ux.intel.com, robh+dt@...nel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org
Cc: gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
nikolaus.voss@...wensteinmedical.de,
andriy.shevchenko@...ux.intel.com, garsilva@...eddedor.com,
keescook@...omium.org,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Subject: [PATCH 0/1] Add USB role switch to tps6598x
This patch - adds USB role switching to the TI TPS6598x. It has been tested
out with a ChipIdea controller inside a Qualcomm MSM8939.
Right now you need to have configured the TPS firmware with the TI
configuration tool so that the chip knows if it should initiate or accept
data and power role swaps.
https://www.ti.com/lit/an/slva843a/slva843a.pdf
Heikki mentioned that on the ACPI systems the firmware had been
pre-configured to do data/power role swaps. On the hardware I have this is
the case also, which is why I did't invest more time in adding DT bindings
to control data/power roles that I don't need or necessarily support with
the reference hardware.
As-is this code will do role-swappping nicely for me, and I think should be
safe on existing ACPI systems.
Bryan O'Donoghue (1):
usb: typec: tps6598x: Add USB role switching logic
drivers/usb/typec/tps6598x.c | 56 +++++++++++++++++++++++++++++++-----
1 file changed, 49 insertions(+), 7 deletions(-)
--
2.25.1
Powered by blists - more mailing lists