linux-kernel - Re: [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200507140750.GA2019@Mani-XPS-13-9360>
Date:   Thu, 7 May 2020 19:37:50 +0530
From:   Manivannan Sadhasivam <mani@...nel.org>
To:     gregkh@...uxfoundation.org
Cc:     linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        fabrice.gasnier@...com, andy.shevchenko@...il.com,
        robh+dt@...nel.org, mcoquelin.stm32@...il.com,
        alexandre.torgue@...com
Subject: Re: [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART

Hi Greg,

On Mon, Apr 20, 2020 at 10:32:02PM +0530, mani@...nel.org wrote:
> From: Manivannan Sadhasivam <mani@...nel.org>
> 
> Hello,
> 
> This patchset adds CTS/RTS gpio support to STM32 UART controller.
> Eventhough the UART controller supports using dedicated CTS/RTS gpios,
> sometimes we need to use different set of gpios for flow control.
> 
> This is necessary for the upcoming STM32MP1 based board called Stinger96
> IoT-Box. On that board, a bluetooth chip is connected to one of the UART
> controller but the CTS/RTS lines got swapped mistakenly. So this patchset
> serves as a workaround for that hardware bug and also supports the
> usecase of using any gpio for CTS/RTS functionality. As per the sugggestion
> provided by Andy for v1, I've now switched to mctrl_gpio driver.
> 
> This patchset has been validated with Stinger96 IoT-Box connected to Murata
> WiFi-BT combo chip.
> 

Are you planning to take this series for 5.8?

Thanks,
Mani

> Thanks,
> Mani
> 
> Changes in v3:
> 
> * Added Andy's reviewed-by tag
> * Fixed minor issues spotted by Fabrice
> 
> Changes in v2:
> 
> As per the review by Andy:
> 
> * Switched to mctrl_gpio driver instead of using custom CTS/RTS
>   implementation
> * Removed the use of software flow control terminology.
> 
> Manivannan Sadhasivam (2):
>   dt-bindings: serial: Document CTS/RTS gpios in STM32 UART
>   tty: serial: Add modem control gpio support for STM32 UART
> 
>  .../bindings/serial/st,stm32-uart.yaml        | 14 +++++
>  drivers/tty/serial/Kconfig                    |  1 +
>  drivers/tty/serial/stm32-usart.c              | 53 ++++++++++++++++++-
>  drivers/tty/serial/stm32-usart.h              |  1 +
>  4 files changed, 67 insertions(+), 2 deletions(-)
> 
> -- 
> 2.17.1
>