linux-kernel - [PATCH v11 40/56] Input: atmel_mxt_ts - rely on calculated_crc rather than file config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200508055656.96389-41-jiada_wang@mentor.com>
Date:   Thu, 7 May 2020 22:56:40 -0700
From:   Jiada Wang <jiada_wang@...tor.com>
To:     <nick@...anahar.org>, <dmitry.torokhov@...il.com>,
        <jikos@...nel.org>, <benjamin.tissoires@...hat.com>,
        <bsz@...ihalf.com>
CC:     <linux-input@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <erosca@...adit-jv.com>, <Andrew_Gabbasov@...tor.com>,
        <jiada_wang@...tor.com>
Subject: [PATCH v11 40/56] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc

From: Kautuk Consul <kautuk_consul@...tor.com>

We now prefer to rely on the calculated CRC and not on the CRC stored in
the file.

The new logic is as follows:
1) stored CRC of file != calculated CRC of file, then refuse the possible
   corrupted file
2) calculated CRC of file != CRC of configuration in controller, then
   update configuration in controller
3) calculated CRC of file == CRC of configuration in controller, then
   ignore configuration file

Signed-off-by: Kautuk Consul <kautuk_consul@...tor.com>
Signed-off-by: George G. Davis <george_davis@...tor.com>
Signed-off-by: Jiada Wang <jiada_wang@...tor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++-----------
 1 file changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9281a574ca80..75329f87927b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1891,7 +1891,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 	int ret;
 	int offset;
 	int i;
-	u32 info_crc, config_crc, calculated_crc;
+	u32 info_crc, config_crc, calculated_crc = 0;
 	u16 crc_start = 0;
 
 	/* Make zero terminated copy of the OBP_RAW file */
@@ -1954,30 +1954,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 	}
 	cfg.raw_pos += offset;
 
-	/*
-	 * The Info Block CRC is calculated over mxt_info and the object
-	 * table. If it does not match then we are trying to load the
-	 * configuration from a different chip or firmware version, so
-	 * the configuration CRC is invalid anyway.
-	 */
-	if (info_crc == data->info_crc) {
-		if (config_crc == 0 || data->config_crc == 0) {
-			dev_info(dev, "CRC zero, attempting to apply config\n");
-		} else if (config_crc == data->config_crc) {
-			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
-				 data->config_crc);
-			ret = 0;
-			goto release_raw;
-		} else {
-			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
-				 data->config_crc, config_crc);
-		}
-	} else {
-		dev_warn(dev,
-			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
-			 data->info_crc, info_crc);
-	}
-
 	/* Malloc memory to store configuration */
 	cfg.start_ofs = MXT_OBJECT_START +
 			data->info->object_num * sizeof(struct mxt_object) +
@@ -2001,14 +1977,45 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 	else
 		dev_warn(dev, "Could not find CRC start\n");
 
-	if (crc_start > cfg.start_ofs) {
+	if (crc_start > cfg.start_ofs)
 		calculated_crc = mxt_calculate_crc(cfg.mem,
 						   crc_start - cfg.start_ofs,
 						   cfg.mem_size);
 
-		if (config_crc > 0 && config_crc != calculated_crc)
-			dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
-				 calculated_crc, config_crc);
+	/* If the CRC stored in the file is not the same as what
+	 * was calculated by mxt_calculate_crc, this means we
+	 * have to refuse the config file and abort download.
+	 */
+	if (config_crc != calculated_crc) {
+		dev_warn(dev,
+			 "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+			 calculated_crc, config_crc);
+		ret = 0;
+		goto release_mem;
+	}
+
+	/*
+	 * The Info Block CRC is calculated over mxt_info and the object
+	 * table. If it does not match then we are trying to load the
+	 * configuration from a different chip or firmware version, so
+	 * the configuration CRC is invalid anyway.
+	 */
+	if (info_crc == data->info_crc) {
+		if (config_crc == 0 || data->config_crc == 0) {
+			dev_info(dev, "CRC zero, attempting to apply config\n");
+		} else if (config_crc == data->config_crc) {
+			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+				data->config_crc);
+			ret = 0;
+			goto release_mem;
+		} else {
+			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+				 data->config_crc, config_crc);
+		}
+	} else {
+		dev_warn(dev,
+			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+			 data->info_crc, info_crc);
 	}
 
 	ret = mxt_upload_cfg_mem(data, &cfg);
-- 
2.17.1