[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200508082937.14171-8-rogerq@ti.com>
Date: Fri, 8 May 2020 11:29:37 +0300
From: Roger Quadros <rogerq@...com>
To: <t-kristo@...com>
CC: <robh@...nel.org>, <kishon@...com>, <nm@...com>, <nsekhar@...com>,
<vigneshr@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Roger Quadros <rogerq@...com>
Subject: [PATCH v3 7/7] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line
The Type-C compainon chip on the board needs ~133ms (tCCB_DEFAULT)
to debounce the CC lines in order to detect attach and plug orientation
and reflect the correct DIR status. [1]
On the EVM however we need to wait upto 700ms before sampling the
Type-C DIR line else we can get incorrect direction state.
[1] http://www.ti.com/lit/ds/symlink/tusb321.pdf
Signed-off-by: Roger Quadros <rogerq@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
---
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 55c98688eceb..8c505904d7cb 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -350,6 +350,7 @@
&serdes_wiz3 {
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+ typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
};
&serdes3 {
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists