| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 10 May 2020 09:36:55 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Cc: Alexandru Ardelean <alexandru.ardelean@...log.com>,
linux-iio@...r.kernel.org, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] iio: hid-sensors: move triggered buffer setup into
hid_sensor_setup_trigger
On Sat, 09 May 2020 03:49:31 -0700
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com> wrote:
> On Fri, 2020-04-24 at 07:34 +0300, Alexandru Ardelean wrote:
> > The main intent here is to get rid of the iio_buffer_set_attrs()
> > helper, or
> > at least rework it's usage a bit.
> > The problem with that helper is that it needs a pointer to the
> > buffer,
> > which makes supporting multiple buffers per IIO device a bit more
> > cumbersome.
> >
> > The hid_sensor_setup_trigger() is pretty much used in the same way:
> > - iio_triggered_buffer_setup() gets called before
> > - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode()
> > gets
> > called which may attach some fifo attributes
> >
> > This change merges the 2 together under the
> > hid_sensor_setup_trigger()
> > function. Only the &iio_pollfunc_store_time is passed to all devices,
> > so
> > it's not even required to pass it explicitly outside of the common
> > hid_sensor_setup_trigger() function.
> >
> > Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the
> > common
> > place code can help the rework of the buffer code, since it is in one
> > place.
> >
> > One detail of the change is that there are 2 drivers that use
> > devm_iio_triggered_buffer_setup(). That function gets implicitly
> > replaced with iio_triggered_buffer_setup()/cleanup(), but since all
> > drivers
> > call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger()
> > trigger,
> > the iio_triggered_buffer_cleanup() piggy backs on the
> > hid_sensor_remove_trigger() call, which should cover the cleanup.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Applied. Thanks,
Jonathan
>
> > ---
> > drivers/iio/accel/hid-sensor-accel-3d.c | 18 ++++----------
> > ----
> > .../common/hid-sensors/hid-sensor-trigger.c | 18 +++++++++++++++-
> > --
> > .../common/hid-sensors/hid-sensor-trigger.h | 3 ++-
> > drivers/iio/gyro/hid-sensor-gyro-3d.c | 18 ++++----------
> > ----
> > drivers/iio/humidity/hid-sensor-humidity.c | 12 +++---------
> > drivers/iio/light/hid-sensor-als.c | 18 ++++----------
> > ----
> > drivers/iio/light/hid-sensor-prox.c | 18 ++++----------
> > ----
> > drivers/iio/magnetometer/hid-sensor-magn-3d.c | 18 ++++----------
> > ----
> > drivers/iio/orientation/hid-sensor-incl-3d.c | 18 ++++----------
> > ----
> > drivers/iio/orientation/hid-sensor-rotation.c | 18 ++++----------
> > ----
> > drivers/iio/pressure/hid-sensor-press.c | 18 ++++----------
> > ----
> > .../iio/temperature/hid-sensor-temperature.c | 12 +++---------
> > 12 files changed, 55 insertions(+), 134 deletions(-)
> >
> > diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c
> > b/drivers/iio/accel/hid-sensor-accel-3d.c
> > index 0d9e2def2b25..0ec0533448bc 100644
> > --- a/drivers/iio/accel/hid-sensor-accel-3d.c
> > +++ b/drivers/iio/accel/hid-sensor-accel-3d.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > enum accel_3d_channel {
> > @@ -391,18 +389,13 @@ static int hid_accel_3d_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&accel_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &accel_state-
> > >common_attributes);
> > if (ret < 0) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -426,9 +419,7 @@ static int hid_accel_3d_probe(struct
> > platform_device *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&accel_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &accel_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -443,8 +434,7 @@ static int hid_accel_3d_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev, hsdev->usage);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&accel_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &accel_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > index 906d87780419..ff375790b7e8 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > @@ -13,6 +13,8 @@
> > #include <linux/hid-sensor-hub.h>
> > #include <linux/iio/iio.h>
> > #include <linux/iio/trigger.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#include <linux/iio/trigger_consumer.h>
> > #include <linux/iio/buffer.h>
> > #include <linux/iio/sysfs.h>
> > #include "hid-sensor-trigger.h"
> > @@ -222,7 +224,8 @@ static int
> > hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
> > return hid_sensor_power_state(iio_trigger_get_drvdata(trig),
> > state);
> > }
> >
> > -void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
> > +void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
> > + struct hid_sensor_common *attrb)
> > {
> > if (atomic_read(&attrb->runtime_pm_enable))
> > pm_runtime_disable(&attrb->pdev->dev);
> > @@ -233,6 +236,7 @@ void hid_sensor_remove_trigger(struct
> > hid_sensor_common *attrb)
> > cancel_work_sync(&attrb->work);
> > iio_trigger_unregister(attrb->trigger);
> > iio_trigger_free(attrb->trigger);
> > + iio_triggered_buffer_cleanup(indio_dev);
> > }
> > EXPORT_SYMBOL(hid_sensor_remove_trigger);
> >
> > @@ -246,11 +250,18 @@ int hid_sensor_setup_trigger(struct iio_dev
> > *indio_dev, const char *name,
> > int ret;
> > struct iio_trigger *trig;
> >
> > + ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > + NULL, NULL);
> > + if (ret) {
> > + dev_err(&indio_dev->dev, "Triggered Buffer Setup
> > Failed\n");
> > + return ret;
> > + }
> > +
> > trig = iio_trigger_alloc("%s-dev%d", name, indio_dev->id);
> > if (trig == NULL) {
> > dev_err(&indio_dev->dev, "Trigger Allocate Failed\n");
> > ret = -ENOMEM;
> > - goto error_ret;
> > + goto error_triggered_buffer_cleanup;
> > }
> >
> > trig->dev.parent = indio_dev->dev.parent;
> > @@ -284,7 +295,8 @@ int hid_sensor_setup_trigger(struct iio_dev
> > *indio_dev, const char *name,
> > iio_trigger_unregister(trig);
> > error_free_trig:
> > iio_trigger_free(trig);
> > -error_ret:
> > +error_triggered_buffer_cleanup:
> > + iio_triggered_buffer_cleanup(indio_dev);
> > return ret;
> > }
> > EXPORT_SYMBOL(hid_sensor_setup_trigger);
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
> > b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
> > index f47b940ff170..bb45cc89e551 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
> > @@ -13,7 +13,8 @@ extern const struct dev_pm_ops hid_sensor_pm_ops;
> >
> > int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char
> > *name,
> > struct hid_sensor_common *attrb);
> > -void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
> > +void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
> > + struct hid_sensor_common *attrb);
> > int hid_sensor_power_state(struct hid_sensor_common *st, bool
> > state);
> >
> > #endif
> > diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > b/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > index 08cacbbf31e6..7f382aae1dfd 100644
> > --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > enum gyro_3d_channel {
> > @@ -326,18 +324,13 @@ static int hid_gyro_3d_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&gyro_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &gyro_state-
> > >common_attributes);
> > if (ret < 0) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -361,9 +354,7 @@ static int hid_gyro_3d_probe(struct
> > platform_device *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&gyro_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &gyro_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -378,8 +369,7 @@ static int hid_gyro_3d_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&gyro_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &gyro_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/humidity/hid-sensor-humidity.c
> > b/drivers/iio/humidity/hid-sensor-humidity.c
> > index c99b54b0568d..d2318c4aab0f 100644
> > --- a/drivers/iio/humidity/hid-sensor-humidity.c
> > +++ b/drivers/iio/humidity/hid-sensor-humidity.c
> > @@ -7,8 +7,6 @@
> > #include <linux/hid-sensor-hub.h>
> > #include <linux/iio/buffer.h>
> > #include <linux/iio/iio.h>
> > -#include <linux/iio/triggered_buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > #include <linux/module.h>
> > #include <linux/platform_device.h>
> >
> > @@ -233,12 +231,8 @@ static int hid_humidity_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev,
> > - &iio_pollfunc_store_time, NULL,
> > NULL);
> > - if (ret)
> > - return ret;
> > -
> > atomic_set(&humid_st->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &humid_st->common_attributes);
> > if (ret)
> > @@ -261,7 +255,7 @@ static int hid_humidity_probe(struct
> > platform_device *pdev)
> > error_remove_callback:
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&humid_st->common_attributes);
> > + hid_sensor_remove_trigger(indio_dev, &humid_st-
> > >common_attributes);
> > return ret;
> > }
> >
> > @@ -274,7 +268,7 @@ static int hid_humidity_remove(struct
> > platform_device *pdev)
> >
> > iio_device_unregister(indio_dev);
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
> > - hid_sensor_remove_trigger(&humid_st->common_attributes);
> > + hid_sensor_remove_trigger(indio_dev, &humid_st-
> > >common_attributes);
> >
> > return 0;
> > }
> > diff --git a/drivers/iio/light/hid-sensor-als.c
> > b/drivers/iio/light/hid-sensor-als.c
> > index b6cd299517d1..81fa2a422797 100644
> > --- a/drivers/iio/light/hid-sensor-als.c
> > +++ b/drivers/iio/light/hid-sensor-als.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > enum {
> > @@ -308,18 +306,13 @@ static int hid_als_probe(struct platform_device
> > *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&als_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &als_state->common_attributes);
> > if (ret < 0) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -343,9 +336,7 @@ static int hid_als_probe(struct platform_device
> > *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&als_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &als_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -360,8 +351,7 @@ static int hid_als_remove(struct platform_device
> > *pdev)
> >
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&als_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &als_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/light/hid-sensor-prox.c
> > b/drivers/iio/light/hid-sensor-prox.c
> > index 7e1030af9ba3..e9c04df07344 100644
> > --- a/drivers/iio/light/hid-sensor-prox.c
> > +++ b/drivers/iio/light/hid-sensor-prox.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > #define CHANNEL_SCAN_INDEX_PRESENCE 0
> > @@ -286,18 +284,13 @@ static int hid_prox_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&prox_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &prox_state->common_attributes);
> > if (ret) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -321,9 +314,7 @@ static int hid_prox_probe(struct platform_device
> > *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&prox_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &prox_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -338,8 +329,7 @@ static int hid_prox_remove(struct platform_device
> > *pdev)
> >
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PROX);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&prox_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &prox_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > index 25e60b233e08..0c09daf87794 100644
> > --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > enum magn_3d_channel {
> > @@ -519,18 +517,13 @@ static int hid_magn_3d_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - return ret;
> > - }
> > atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &magn_state-
> > >magn_flux_attributes);
> > if (ret < 0) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + return ret;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -554,9 +547,7 @@ static int hid_magn_3d_probe(struct
> > platform_device *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &magn_state-
> > >magn_flux_attributes);
> > return ret;
> > }
> >
> > @@ -569,8 +560,7 @@ static int hid_magn_3d_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &magn_state-
> > >magn_flux_attributes);
> >
> > return 0;
> > }
> > diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c
> > b/drivers/iio/orientation/hid-sensor-incl-3d.c
> > index 00af68764cda..6aac8bea233a 100644
> > --- a/drivers/iio/orientation/hid-sensor-incl-3d.c
> > +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
> > @@ -15,8 +15,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > enum incl_3d_channel {
> > @@ -346,18 +344,13 @@ static int hid_incl_3d_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&incl_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &incl_state-
> > >common_attributes);
> > if (ret) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -382,9 +375,7 @@ static int hid_incl_3d_probe(struct
> > platform_device *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&incl_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &incl_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -399,8 +390,7 @@ static int hid_incl_3d_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev,
> > HID_USAGE_SENSOR_INCLINOMETER_3D);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&incl_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &incl_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/orientation/hid-sensor-rotation.c
> > b/drivers/iio/orientation/hid-sensor-rotation.c
> > index 64ae7d04a200..b99f41240e3e 100644
> > --- a/drivers/iio/orientation/hid-sensor-rotation.c
> > +++ b/drivers/iio/orientation/hid-sensor-rotation.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > struct dev_rot_state {
> > @@ -288,18 +286,13 @@ static int hid_dev_rot_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - return ret;
> > - }
> > atomic_set(&rot_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &rot_state->common_attributes);
> > if (ret) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + return ret;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -323,9 +316,7 @@ static int hid_dev_rot_probe(struct
> > platform_device *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&rot_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &rot_state-
> > >common_attributes);
> > return ret;
> > }
> >
> > @@ -338,8 +329,7 @@ static int hid_dev_rot_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev, hsdev->usage);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&rot_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &rot_state-
> > >common_attributes);
> >
> > return 0;
> > }
> > diff --git a/drivers/iio/pressure/hid-sensor-press.c
> > b/drivers/iio/pressure/hid-sensor-press.c
> > index 953235052155..5e6663f757ae 100644
> > --- a/drivers/iio/pressure/hid-sensor-press.c
> > +++ b/drivers/iio/pressure/hid-sensor-press.c
> > @@ -14,8 +14,6 @@
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > -#include <linux/iio/triggered_buffer.h>
> > #include "../common/hid-sensors/hid-sensor-trigger.h"
> >
> > #define CHANNEL_SCAN_INDEX_PRESSURE 0
> > @@ -290,18 +288,13 @@ static int hid_press_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = iio_triggered_buffer_setup(indio_dev,
> > &iio_pollfunc_store_time,
> > - NULL, NULL);
> > - if (ret) {
> > - dev_err(&pdev->dev, "failed to initialize trigger
> > buffer\n");
> > - goto error_free_dev_mem;
> > - }
> > atomic_set(&press_state->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &press_state->common_attributes);
> > if (ret) {
> > dev_err(&pdev->dev, "trigger setup failed\n");
> > - goto error_unreg_buffer_funcs;
> > + goto error_free_dev_mem;
> > }
> >
> > ret = iio_device_register(indio_dev);
> > @@ -325,9 +318,7 @@ static int hid_press_probe(struct platform_device
> > *pdev)
> > error_iio_unreg:
> > iio_device_unregister(indio_dev);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&press_state->common_attributes);
> > -error_unreg_buffer_funcs:
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &press_state-
> > >common_attributes);
> > error_free_dev_mem:
> > kfree(indio_dev->channels);
> > return ret;
> > @@ -342,8 +333,7 @@ static int hid_press_remove(struct
> > platform_device *pdev)
> >
> > sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE);
> > iio_device_unregister(indio_dev);
> > - hid_sensor_remove_trigger(&press_state->common_attributes);
> > - iio_triggered_buffer_cleanup(indio_dev);
> > + hid_sensor_remove_trigger(indio_dev, &press_state-
> > >common_attributes);
> > kfree(indio_dev->channels);
> >
> > return 0;
> > diff --git a/drivers/iio/temperature/hid-sensor-temperature.c
> > b/drivers/iio/temperature/hid-sensor-temperature.c
> > index eda55b9c1e9b..8d1f434f109d 100644
> > --- a/drivers/iio/temperature/hid-sensor-temperature.c
> > +++ b/drivers/iio/temperature/hid-sensor-temperature.c
> > @@ -7,8 +7,6 @@
> > #include <linux/hid-sensor-hub.h>
> > #include <linux/iio/buffer.h>
> > #include <linux/iio/iio.h>
> > -#include <linux/iio/triggered_buffer.h>
> > -#include <linux/iio/trigger_consumer.h>
> > #include <linux/module.h>
> > #include <linux/platform_device.h>
> >
> > @@ -230,12 +228,8 @@ static int hid_temperature_probe(struct
> > platform_device *pdev)
> > indio_dev->name = name;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev,
> > - &iio_pollfunc_store_time, NULL,
> > NULL);
> > - if (ret)
> > - return ret;
> > -
> > atomic_set(&temp_st->common_attributes.data_ready, 0);
> > +
> > ret = hid_sensor_setup_trigger(indio_dev, name,
> > &temp_st->common_attributes);
> > if (ret)
> > @@ -258,7 +252,7 @@ static int hid_temperature_probe(struct
> > platform_device *pdev)
> > error_remove_callback:
> > sensor_hub_remove_callback(hsdev,
> > HID_USAGE_SENSOR_TEMPERATURE);
> > error_remove_trigger:
> > - hid_sensor_remove_trigger(&temp_st->common_attributes);
> > + hid_sensor_remove_trigger(indio_dev, &temp_st-
> > >common_attributes);
> > return ret;
> > }
> >
> > @@ -270,7 +264,7 @@ static int hid_temperature_remove(struct
> > platform_device *pdev)
> > struct temperature_state *temp_st = iio_priv(indio_dev);
> >
> > sensor_hub_remove_callback(hsdev,
> > HID_USAGE_SENSOR_TEMPERATURE);
> > - hid_sensor_remove_trigger(&temp_st->common_attributes);
> > + hid_sensor_remove_trigger(indio_dev, &temp_st-
> > >common_attributes);
> >
> > return 0;
> > }
>
Powered by blists - more mailing lists