[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200511192909.GC2166963@builder.lan>
Date: Mon, 11 May 2020 12:29:09 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Sibi Sankar <sibis@...eaurora.org>
Cc: robh+dt@...nel.org, agross@...nel.org,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, evgreen@...omium.org,
ohad@...ery.com, mka@...omium.org, dianders@...omium.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 6/7] arm64: dts: qcom: sc7180: Add Q6V5 MSS node
On Tue 21 Apr 07:32 PDT 2020, Sibi Sankar wrote:
> This patch adds Q6V5 MSS PAS remoteproc node for SC7180 SoCs.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Signed-off-by: Sibi Sankar <sibis@...eaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 36 ++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 65c14a6d13fef..94cead96eade0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1323,6 +1323,42 @@ pinconf-sd-cd {
> };
> };
>
> + remoteproc_mpss: remoteproc@...0000 {
> + compatible = "qcom,sc7180-mpss-pas";
> + reg = <0 0x04080000 0 0x4040>;
> +
> + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
> + <&rpmhpd SC7180_CX>,
> + <&rpmhpd SC7180_MSS>;
> + power-domain-names = "load_state", "cx", "mss";
> +
> + memory-region = <&mpss_mem>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> + label = "modem";
> + qcom,remote-pid = <1>;
> + mboxes = <&apss_shared 12>;
> + };
> + };
> +
> sdhc_2: sdhci@...4000 {
> compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
> reg = <0 0x08804000 0 0x1000>;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
Powered by blists - more mailing lists