linux-kernel - Re: [PATCH 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAL9mu0+5T3q8V8Ng_1jfPGfBxDWzgd7T1hzcdUXj23-rEtOgfg@mail.gmail.com>
Date:   Mon, 11 May 2020 17:05:23 +0800
From:   dillon min <dillon.minfei@...il.com>
To:     Alexandre Torgue <alexandre.torgue@...com>
Cc:     robh+dt@...nel.org, mcoquelin.stm32@...il.com,
        Mark Brown <broonie@...nel.org>, p.zabel@...gutronix.de,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        Hua Dillon <dillonhua@...il.com>
Subject: Re: [PATCH 2/3] ARM: dts: stm32: enable l3gd20 on stm32429-disco board

Hi, Alexandre,

Thanks for review.

On Mon, May 11, 2020 at 3:17 PM Alexandre Torgue
<alexandre.torgue@...com> wrote:
>
> Hi
>
> On 5/9/20 8:58 AM, dillon.minfei@...il.com wrote:
> > From: dillon min <dillon.minfei@...il.com>
> >
> > Enable l3gd20 on stm32429-disco board.
>
> You could add some words about l3gd20
ok, thanks, i will add some description about l3gd20.
>
> >
> > Signed-off-by: dillon min <dillon.minfei@...il.com>
> > ---
> >   arch/arm/boot/dts/stm32f429-disco.dts | 24 ++++++++++++++++++++++++
> >   1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
> > index 30c0f67..d365358 100644
> > --- a/arch/arm/boot/dts/stm32f429-disco.dts
> > +++ b/arch/arm/boot/dts/stm32f429-disco.dts
> > @@ -49,6 +49,8 @@
> >   #include "stm32f429.dtsi"
> >   #include "stm32f429-pinctrl.dtsi"
> >   #include <dt-bindings/input/input.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/gpio/gpio.h>
> >
> >   / {
> >       model = "STMicroelectronics STM32F429i-DISCO board";
> > @@ -127,3 +129,25 @@
> >       pinctrl-names = "default";
> >       status = "okay";
> >   };
> > +
> > +&spi5 {
> > +     status = "okay";
> > +     pinctrl-0 = <&spi5_pins>;
> > +     pinctrl-names = "default";
> > +     #address-cells = <1>;
> > +     #size-cells = <0>;
> > +     cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>;
> > +     dmas = <&dma2 3 2 0x400 0x0>,
> > +            <&dma2 4 2 0x400 0x0>;
> > +     dma-names = "rx", "tx";
>
> Insert blank line here.
ok
>
> > +     l3gd20: l3gd20@0 {
> > +             compatible = "st,l3gd20-gyro";
> > +             spi-max-frequency = <10000000>;
> > +             st,drdy-int-pin = <2>;
> > +             interrupt-parent = <&gpioa>;
> > +             interrupts = <1 IRQ_TYPE_EDGE_RISING>,
> > +                             <2 IRQ_TYPE_EDGE_RISING>;
> > +             reg = <0>;
> > +             status = "okay";
> > +     };
> > +};
> >