linux-kernel - Re: [PATCH] coresight: dynamic-replicator: Fix handling of multiple connections

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 11 May 2020 19:46:51 +0530
From:   Sai Prakash Ranjan <saiprakash.ranjan@...eaurora.org>
To:     Mike Leach <mike.leach@...aro.org>
Cc:     Suzuki K Poulose <suzuki.poulose@....com>,
        Mathieu Poirier <mathieu.poirier@...aro.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-msm@...r.kernel.org,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Russell King <linux@...linux.org.uk>
Subject: Re: [PATCH] coresight: dynamic-replicator: Fix handling of multiple
 connections

Hi Mike,

On 2020-05-11 16:44, Mike Leach wrote:
[...]

>> 
>> I checked with the debug team and there is a limitation with
>> the replicator(swao_replicator) in the AOSS group where it
>> loses the idfilter register context when the clock is disabled.
>> This is not just in SC7180 SoC but also reported on some latest
>> upcoming QCOM SoCs as well and will need to be taken care in
>> order to enable coresight on these chipsets.
>> 
>> Here's what's happening -  After the replicator is initialized,
>> the clock is disabled in amba_pm_runtime_suspend() as a part of
>> pm runtime workqueue with the assumption that there will be no
>> loss of context after the replicator is initialized. But it doesn't
>> hold good with the replicators with these unfortunate limitation
>> and the idfilter register context is lost.
>> 
>> [    5.889406] amba_pm_runtime_suspend devname=6b06000.replicator 
>> ret=0
>> [    5.914516] Workqueue: pm pm_runtime_work
>> [    5.918648] Call trace:
>> [    5.921185]  dump_backtrace+0x0/0x1d0
>> [    5.924958]  show_stack+0x2c/0x38
>> [    5.928382]  dump_stack+0xc0/0x104
>> [    5.931896]  amba_pm_runtime_suspend+0xd8/0xe0
>> [    5.936469]  __rpm_callback+0xe0/0x140
>> [    5.940332]  rpm_callback+0x38/0x98
>> [    5.943926]  rpm_suspend+0xec/0x618
>> [    5.947522]  rpm_idle+0x5c/0x3f8
>> [    5.950851]  pm_runtime_work+0xa8/0xc0
>> [    5.954718]  process_one_work+0x1f8/0x4c0
>> [    5.958848]  worker_thread+0x50/0x468
>> [    5.962623]  kthread+0x12c/0x158
>> [    5.965957]  ret_from_fork+0x10/0x1c
>> 
>> This is a platform/SoC specific replicator issue, so we can either
>> introduce some DT property for replicators to identify which 
>> replicator
>> has this limitation, check in replicator_enable() and reset the
>> registers
>> or have something like below diff to check the idfilter registers in
>> replicator_enable() and then reset with clear comment specifying it’s
>> the
>> hardware limitation on some QCOM SoCs. Please let me know your 
>> thoughts
>> on
>> this?
>> 

Sorry for hurrying up and sending the patch - 
https://lore.kernel.org/patchwork/patch/1239923/.
I will send v2 based on further feedbacks here or there.

> 
> 1) does this replicator part have a unique ID that differs from the
> standard ARM designed replicators?
> If so perhaps link the modification into this. (even if the part no in
> PIDR0/1 is the same the UCI should be different for a different
> implementation)
> 

pid=0x2bb909 for both replicators. So part number is same.
UCI will be different for different implementation(QCOM maybe different 
from ARM),
but will it be different for different replicators under the same 
impl(i.e., on QCOM).

> 2) We have used DT properties in the past - (e.g. scatter gather in
> TMC) where hardware compatibility issues have impacted on the
> operation of a coresight component. This is further complicated by the
> fact that an ACPI property would be needed as well.
> 

Yes, this was also one option which I had mentioned. But as you said we 
need
to have an ACPI property as well and these systems with limitations are 
DT based.

> 3) The sysfs access to FILTERID0/1 on this replicator is going to show
> different values than on a standard replicator (0x00 instead of 0xFF).
> Does this need to be addressed?
> 

I don't think we need to change this because its actually showing the 
right
values for the replicator.

> 4 ) An alternative approach could be to model the driver on the ETM /
> CTI drivers where the register values are held in the driver structure
> and only applied on enable / disable.
> 

This looks good to me since we really don't need to reset replicator in 
probe,
we need to reset it only in replicator_enable() and that ensures clocks 
are enabled
without having to assume things(from amba) about context being lost or 
not when
clocks are disabled since that is implementation defined anyways.

But, why can't we just move replicator_reset() from probe to 
replicator_enable()?
Anything wrong with it? Seems like right thing to do because we will be 
having
clocks enabled when we touch the replicator registers and only in the 
enable
path.

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation