lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200512213812.981538552@linutronix.de>
Date:   Tue, 12 May 2020 23:01:34 +0200
From:   Thomas Gleixner <tglx@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     x86@...nel.org, "Paul E. McKenney" <paulmck@...nel.org>,
        Andy Lutomirski <luto@...nel.org>,
        Alexandre Chartre <alexandre.chartre@...cle.com>,
        Frederic Weisbecker <frederic@...nel.org>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Sean Christopherson <sean.j.christopherson@...el.com>,
        Masami Hiramatsu <mhiramat@...nel.org>,
        Petr Mladek <pmladek@...e.com>,
        Steven Rostedt <rostedt@...dmis.org>,
        Joel Fernandes <joel@...lfernandes.org>,
        Boris Ostrovsky <boris.ostrovsky@...cle.com>,
        Juergen Gross <jgross@...e.com>,
        Brian Gerst <brgerst@...il.com>,
        Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
        Josh Poimboeuf <jpoimboe@...hat.com>,
        Will Deacon <will@...nel.org>,
        Tom Lendacky <thomas.lendacky@....com>,
        Wei Liu <wei.liu@...nel.org>,
        Michael Kelley <mikelley@...rosoft.com>,
        Jason Chen CJ <jason.cj.chen@...el.com>,
        Zhao Yakui <yakui.zhao@...el.com>,
        "Peter Zijlstra (Intel)" <peterz@...radead.org>
Subject: [patch V5 35/38] x86/entry/32: Remove redundant irq disable code

From: Thomas Gleixner <tglx@...utronix.de>

All exceptions/interrupts return with interrupts disabled now. No point in
doing this in ASM again.

Signed-off-by: Thomas Gleixner <tglx@...utronix.de>

---
 arch/x86/entry/entry_32.S |   76 ----------------------------------------------
 1 file changed, 76 deletions(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -51,34 +51,6 @@
 
 	.section .entry.text, "ax"
 
-/*
- * We use macros for low-level operations which need to be overridden
- * for paravirtualization.  The following will never clobber any registers:
- *   INTERRUPT_RETURN (aka. "iret")
- *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
- *
- * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
- * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
- * Allowing a register to be clobbered can shrink the paravirt replacement
- * enough to patch inline, increasing performance.
- */
-
-#ifdef CONFIG_PREEMPTION
-# define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
-#else
-# define preempt_stop(clobbers)
-#endif
-
-.macro TRACE_IRQS_IRET
-#ifdef CONFIG_TRACE_IRQFLAGS
-	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)     # interrupts off?
-	jz	1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
 #define PTI_SWITCH_MASK         (1 << PAGE_SHIFT)
 
 /*
@@ -881,38 +853,6 @@ SYM_CODE_START(ret_from_fork)
 SYM_CODE_END(ret_from_fork)
 .popsection
 
-/*
- * Return to user mode is not as complex as all this looks,
- * but we want the default path for a system call return to
- * go as quickly as possible which is why some of this is
- * less clear than it otherwise should be.
- */
-
-	# userspace resumption stub bypassing syscall exit tracing
-SYM_CODE_START_LOCAL(ret_from_exception)
-	preempt_stop(CLBR_ANY)
-ret_from_intr:
-#ifdef CONFIG_VM86
-	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS and CS
-	movb	PT_CS(%esp), %al
-	andl	$(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
-#else
-	/*
-	 * We can be coming here from child spawned by kernel_thread().
-	 */
-	movl	PT_CS(%esp), %eax
-	andl	$SEGMENT_RPL_MASK, %eax
-#endif
-	cmpl	$USER_RPL, %eax
-	jb	restore_all_kernel		# not returning to v8086 or userspace
-
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movl	%esp, %eax
-	call	prepare_exit_to_usermode
-	jmp	restore_all_switch_stack
-SYM_CODE_END(ret_from_exception)
-
 SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 /*
  * All code from here through __end_SYSENTER_singlestep_region is subject
@@ -1147,22 +1087,6 @@ SYM_FUNC_START(entry_INT80_32)
 	 */
 	INTERRUPT_RETURN
 
-restore_all_kernel:
-#ifdef CONFIG_PREEMPTION
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	cmpl	$0, PER_CPU_VAR(__preempt_count)
-	jnz	.Lno_preempt
-	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)	# interrupts off (exception path) ?
-	jz	.Lno_preempt
-	call	preempt_schedule_irq
-.Lno_preempt:
-#endif
-	TRACE_IRQS_IRET
-	PARANOID_EXIT_TO_KERNEL_MODE
-	BUG_IF_WRONG_CR3
-	RESTORE_REGS 4
-	jmp	.Lirq_return
-
 .section .fixup, "ax"
 SYM_CODE_START(asm_exc_iret_error)
 	pushl	$0				# no error code

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ