[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMj1kXGNWptRShYVtDwoB7jL1_2M1ioroFV=veFt0MB=n6_-OQ@mail.gmail.com>
Date: Tue, 12 May 2020 12:47:59 +0200
From: Ard Biesheuvel <ardb@...nel.org>
To: Punit Agrawal <punit1.agrawal@...hiba.co.jp>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Borislav Petkov <bp@...en8.de>,
James Morse <james.morse@....com>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
linux-efi <linux-efi@...r.kernel.org>
Subject: Re: [Patch v2] efi: cper: Add support for printing Firmware Error
Record Reference
On Tue, 12 May 2020 at 06:55, Punit Agrawal
<punit1.agrawal@...hiba.co.jp> wrote:
>
> While debugging a boot failure, the following unknown error record was
> seen in the boot logs.
>
> <...>
> BERT: Error records from previous boot:
> [Hardware Error]: event severity: fatal
> [Hardware Error]: Error 0, type: fatal
> [Hardware Error]: section type: unknown, 81212a96-09ed-4996-9471-8d729c8e69ed
> [Hardware Error]: section length: 0x290
> [Hardware Error]: 00000000: 00000001 00000000 00000000 00020002 ................
> [Hardware Error]: 00000010: 00020002 0000001f 00000320 00000000 ........ .......
> [Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
> [Hardware Error]: 00000030: 00000000 00000000 00000000 00000000 ................
> <...>
>
> On further investigation, it was found that the error record with
> UUID (81212a96-09ed-4996-9471-8d729c8e69ed) has been defined in the
> UEFI Specification at least since v2.4 and has recently had additional
> fields defined in v2.7 Section N.2.10 Firmware Error Record Reference.
>
> Add support for parsing and printing the defined fields to give users
> a chance to figure out what went wrong.
>
> Signed-off-by: Punit Agrawal <punit1.agrawal@...hiba.co.jp>
> Cc: Ard Biesheuvel <ardb@...nel.org>
> Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
> Cc: Borislav Petkov <bp@...en8.de>
> Cc: James Morse <james.morse@....com>
> Cc: linux-acpi@...r.kernel.org
> Cc: linux-efi@...r.kernel.org
> ---
> Hi Ard,
>
> I've updated the patch based on your feedback.
>
> As you noted, some aspects of the spec make it a bit tricky to support
> all revisions in a nice way (e.g., size check) but this version should
> fix existing issues.
>
> Thanks,
> Punit
>
> v1[0] -> v2:
> * Simplified error record structure definition
> * Fixed size check
> * Added comment to clarify offset calculation for dumped data
> * Style fixes for multiline if blocks
>
Thanks. I will queue this as a fix.
> [0] https://lkml.kernel.org/lkml/20200427085242.2380614-1-punit1.agrawal@toshiba.co.jp/
> ---
> drivers/firmware/efi/cper.c | 62 +++++++++++++++++++++++++++++++++++++
> include/linux/cper.h | 9 ++++++
> 2 files changed, 71 insertions(+)
>
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 9d2512913d25..f564e15fbc7e 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -407,6 +407,58 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
> }
> }
>
> +static const char * const fw_err_rec_type_strs[] = {
> + "IPF SAL Error Record",
> + "SOC Firmware Error Record Type1 (Legacy CrashLog Support)",
> + "SOC Firmware Error Record Type2",
> +};
> +
> +static void cper_print_fw_err(const char *pfx,
> + struct acpi_hest_generic_data *gdata,
> + const struct cper_sec_fw_err_rec_ref *fw_err)
> +{
> + void *buf = acpi_hest_get_payload(gdata);
> + u32 offset, length = gdata->error_data_length;
> +
> + printk("%s""Firmware Error Record Type: %s\n", pfx,
> + fw_err->record_type < ARRAY_SIZE(fw_err_rec_type_strs) ?
> + fw_err_rec_type_strs[fw_err->record_type] : "unknown");
> + printk("%s""Revision: %d\n", pfx, fw_err->revision);
> +
> + /* Record Type based on UEFI 2.7 */
> + if (fw_err->revision == 0) {
> + printk("%s""Record Identifier: %08llx\n", pfx,
> + fw_err->record_identifier);
> + } else if (fw_err->revision == 2) {
> + printk("%s""Record Identifier: %pUl\n", pfx,
> + &fw_err->record_identifier_guid);
> + }
> +
> + /*
> + * The FW error record may contain trailing data beyond the
> + * structure defined by the specification. As the fields
> + * defined (and hence the offset of any trailing data) vary
> + * with the revision, set the offset to account for this
> + * variation.
> + */
> + if (fw_err->revision == 0) {
> + /* record_identifier_guid not defined */
> + offset = offsetof(struct cper_sec_fw_err_rec_ref,
> + record_identifier_guid);
> + } else if (fw_err->revision == 1) {
> + /* record_identifier not defined */
> + offset = offsetof(struct cper_sec_fw_err_rec_ref,
> + record_identifier);
> + } else {
> + offset = sizeof(*fw_err);
> + }
> +
> + buf += offset;
> + length -= offset;
> +
> + print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, buf, length, true);
> +}
> +
> static void cper_print_tstamp(const char *pfx,
> struct acpi_hest_generic_data_v300 *gdata)
> {
> @@ -494,6 +546,16 @@ cper_estatus_print_section(const char *pfx, struct acpi_hest_generic_data *gdata
> else
> goto err_section_too_small;
> #endif
> + } else if (guid_equal(sec_type, &CPER_SEC_FW_ERR_REC_REF)) {
> + struct cper_sec_fw_err_rec_ref *fw_err = acpi_hest_get_payload(gdata);
> +
> + printk("%ssection_type: Firmware Error Record Reference\n",
> + newpfx);
> + /* The minimal FW Error Record contains 16 bytes */
> + if (gdata->error_data_length >= SZ_16)
> + cper_print_fw_err(newpfx, gdata, fw_err);
> + else
> + goto err_section_too_small;
> } else {
> const void *err = acpi_hest_get_payload(gdata);
>
> diff --git a/include/linux/cper.h b/include/linux/cper.h
> index 4f005d95ce88..8537e9282a65 100644
> --- a/include/linux/cper.h
> +++ b/include/linux/cper.h
> @@ -521,6 +521,15 @@ struct cper_sec_pcie {
> u8 aer_info[96];
> };
>
> +/* Firmware Error Record Reference, UEFI v2.7 sec N.2.10 */
> +struct cper_sec_fw_err_rec_ref {
> + u8 record_type;
> + u8 revision;
> + u8 reserved[6];
> + u64 record_identifier;
> + guid_t record_identifier_guid;
> +};
> +
> /* Reset to default packing */
> #pragma pack()
>
> --
> 2.26.2
>
Powered by blists - more mailing lists