| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200513133845.244903-12-maco@android.com>
Date: Wed, 13 May 2020 15:38:45 +0200
From: Martijn Coenen <maco@...roid.com>
To: axboe@...nel.dk, hch@....de, ming.lei@...hat.com
Cc: narayan@...gle.com, zezeozue@...gle.com, maco@...gle.com,
kernel-team@...roid.com, bvanassche@....org,
Chaitanya.Kulkarni@....com, jaegeuk@...nel.org,
linux-block@...r.kernel.org, linux-kernel@...r.kernel.org,
Martijn Coenen <maco@...roid.com>,
Linux API <linux-api@...r.kernel.org>
Subject: [PATCH v5 11/11] loop: Add LOOP_CONFIGURE ioctl
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Reviewed-by: Christoph Hellwig <hch@....de>
Signed-off-by: Martijn Coenen <maco@...roid.com>
---
drivers/block/loop.c | 104 ++++++++++++++++++++++++++++----------
include/uapi/linux/loop.h | 21 ++++++++
2 files changed, 97 insertions(+), 28 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 13518ba191f5..a565c5aafa52 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -228,6 +228,19 @@ static void __loop_update_dio(struct loop_device *lo, bool dio)
blk_mq_unfreeze_queue(lo->lo_queue);
}
+/**
+ * loop_validate_block_size() - validates the passed in block size
+ * @bsize: size to validate
+ */
+static int
+loop_validate_block_size(unsigned short bsize)
+{
+ if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
+ return -EINVAL;
+
+ return 0;
+}
+
/**
* loop_set_size() - sets device size and notifies userspace
* @lo: struct loop_device to set the size for
@@ -1050,23 +1063,24 @@ loop_set_status_from_info(struct loop_device *lo,
return 0;
}
-static int loop_set_fd(struct loop_device *lo, fmode_t mode,
- struct block_device *bdev, unsigned int arg)
+static int loop_configure(struct loop_device *lo, fmode_t mode,
+ struct block_device *bdev,
+ const struct loop_config *config)
{
struct file *file;
struct inode *inode;
struct address_space *mapping;
struct block_device *claimed_bdev = NULL;
- int lo_flags = 0;
int error;
loff_t size;
bool partscan;
+ unsigned short bsize;
/* This is safe, since we have a reference from open(). */
__module_get(THIS_MODULE);
error = -EBADF;
- file = fget(arg);
+ file = fget(config->fd);
if (!file)
goto out;
@@ -1075,7 +1089,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
* here to avoid changing device under exclusive owner.
*/
if (!(mode & FMODE_EXCL)) {
- claimed_bdev = bd_start_claiming(bdev, loop_set_fd);
+ claimed_bdev = bd_start_claiming(bdev, loop_configure);
if (IS_ERR(claimed_bdev)) {
error = PTR_ERR(claimed_bdev);
goto out_putf;
@@ -1097,11 +1111,26 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
mapping = file->f_mapping;
inode = mapping->host;
+ size = get_loop_size(lo, file);
+
+ if ((config->info.lo_flags & ~LOOP_CONFIGURE_SETTABLE_FLAGS) != 0) {
+ error = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (config->block_size) {
+ error = loop_validate_block_size(config->block_size);
+ if (error)
+ goto out_unlock;
+ }
+
+ error = loop_set_status_from_info(lo, &config->info);
+ if (error)
+ goto out_unlock;
+
if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) ||
!file->f_op->write_iter)
- lo_flags |= LO_FLAGS_READ_ONLY;
-
- size = get_loop_size(lo, file);
+ lo->lo_flags |= LO_FLAGS_READ_ONLY;
error = loop_prepare_queue(lo);
if (error)
@@ -1109,30 +1138,28 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
error = 0;
- set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0);
+ set_device_ro(bdev, (lo->lo_flags & LO_FLAGS_READ_ONLY) != 0);
- lo->use_dio = false;
+ lo->use_dio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
lo->lo_device = bdev;
- lo->lo_flags = lo_flags;
lo->lo_backing_file = file;
- lo->transfer = NULL;
- lo->ioctl = NULL;
- lo->lo_sizelimit = 0;
lo->old_gfp_mask = mapping_gfp_mask(mapping);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
- if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
+ if (!(lo->lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
blk_queue_write_cache(lo->lo_queue, true, false);
- if (io_is_direct(lo->lo_backing_file) && inode->i_sb->s_bdev) {
+ if (config->block_size)
+ bsize = config->block_size;
+ else if (io_is_direct(lo->lo_backing_file) && inode->i_sb->s_bdev)
/* In case of direct I/O, match underlying block size */
- unsigned short bsize = bdev_logical_block_size(
- inode->i_sb->s_bdev);
+ bsize = bdev_logical_block_size(inode->i_sb->s_bdev);
+ else
+ bsize = 512;
- blk_queue_logical_block_size(lo->lo_queue, bsize);
- blk_queue_physical_block_size(lo->lo_queue, bsize);
- blk_queue_io_min(lo->lo_queue, bsize);
- }
+ blk_queue_logical_block_size(lo->lo_queue, bsize);
+ blk_queue_physical_block_size(lo->lo_queue, bsize);
+ blk_queue_io_min(lo->lo_queue, bsize);
loop_update_rotational(lo);
loop_update_dio(lo);
@@ -1155,14 +1182,14 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
if (partscan)
loop_reread_partitions(lo, bdev);
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_configure);
return 0;
out_unlock:
mutex_unlock(&loop_ctl_mutex);
out_bdev:
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_configure);
out_putf:
fput(file);
out:
@@ -1582,8 +1609,9 @@ static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
if (lo->lo_state != Lo_bound)
return -ENXIO;
- if (arg < 512 || arg > PAGE_SIZE || !is_power_of_2(arg))
- return -EINVAL;
+ err = loop_validate_block_size(arg);
+ if (err)
+ return err;
if (lo->lo_queue->limits.logical_block_size == arg)
return 0;
@@ -1645,8 +1673,27 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
int err;
switch (cmd) {
- case LOOP_SET_FD:
- return loop_set_fd(lo, mode, bdev, arg);
+ case LOOP_SET_FD: {
+ /*
+ * Legacy case - pass in a zeroed out struct loop_config with
+ * only the file descriptor set , which corresponds with the
+ * default parameters we'd have used otherwise.
+ */
+ struct loop_config config;
+
+ memset(&config, 0, sizeof(config));
+ config.fd = arg;
+
+ return loop_configure(lo, mode, bdev, &config);
+ }
+ case LOOP_CONFIGURE: {
+ struct loop_config config;
+
+ if (copy_from_user(&config, argp, sizeof(config)))
+ return -EFAULT;
+
+ return loop_configure(lo, mode, bdev, &config);
+ }
case LOOP_CHANGE_FD:
return loop_change_fd(lo, bdev, arg);
case LOOP_CLR_FD:
@@ -1818,6 +1865,7 @@ static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
case LOOP_CLR_FD:
case LOOP_GET_STATUS64:
case LOOP_SET_STATUS64:
+ case LOOP_CONFIGURE:
arg = (unsigned long) compat_ptr(arg);
/* fall through */
case LOOP_SET_FD:
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
index 6b32fee80ce0..24a1c45bd1ae 100644
--- a/include/uapi/linux/loop.h
+++ b/include/uapi/linux/loop.h
@@ -31,6 +31,10 @@ enum {
/* LO_FLAGS that can be cleared using LOOP_SET_STATUS(64) */
#define LOOP_SET_STATUS_CLEARABLE_FLAGS (LO_FLAGS_AUTOCLEAR)
+/* LO_FLAGS that can be set using LOOP_CONFIGURE */
+#define LOOP_CONFIGURE_SETTABLE_FLAGS (LO_FLAGS_READ_ONLY | LO_FLAGS_AUTOCLEAR \
+ | LO_FLAGS_PARTSCAN | LO_FLAGS_DIRECT_IO)
+
#include <asm/posix_types.h> /* for __kernel_old_dev_t */
#include <linux/types.h> /* for __u64 */
@@ -66,6 +70,22 @@ struct loop_info64 {
__u64 lo_init[2];
};
+/**
+ * struct loop_config - Complete configuration for a loop device.
+ * @fd: fd of the file to be used as a backing file for the loop device.
+ * @block_size: block size to use; ignored if 0.
+ * @info: struct loop_info64 to configure the loop device with.
+ *
+ * This structure is used with the LOOP_CONFIGURE ioctl, and can be used to
+ * atomically setup and configure all loop device parameters at once.
+ */
+struct loop_config {
+ __u32 fd;
+ __u32 block_size;
+ struct loop_info64 info;
+ __u64 __reserved[8];
+};
+
/*
* Loop filter types
*/
@@ -96,6 +116,7 @@ struct loop_info64 {
#define LOOP_SET_CAPACITY 0x4C07
#define LOOP_SET_DIRECT_IO 0x4C08
#define LOOP_SET_BLOCK_SIZE 0x4C09
+#define LOOP_CONFIGURE 0x4C0A
/* /dev/loop-control interface */
#define LOOP_CTL_ADD 0x4C80
--
2.26.2.645.ge9eca65c58-goog
Powered by blists - more mailing lists