[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200513141134.25819-1-lars.povlsen@microchip.com>
Date: Wed, 13 May 2020 16:11:31 +0200
From: Lars Povlsen <lars.povlsen@...rochip.com>
To: SoC Team <soc@...nel.org>, Linus Walleij <linus.walleij@...aro.org>
CC: Lars Povlsen <lars.povlsen@...rochip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
<devicetree@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 0/3] pinctrl: Adding support for Microchip serial GPIO controller
This is an add-on series to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@...rochip.com>).
The series add support for the serial GPIO controller used by Sparx5,
as well as (MSCC) ocelot/jaguar2.
The GPIO controller only supports output mode currently.
It is expected that the DT patches are to be taken directly by the arm-soc
maintainers.
Lars Povlsen (3):
dt-bindings: pinctrl: Add bindings for mscc,ocelot-sgpio
pinctrl: mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO
arm64: dts: sparx5: Add SGPIO devices
.../bindings/pinctrl/mscc,ocelot-sgpio.yaml | 66 ++
MAINTAINERS | 2 +
arch/arm64/boot/dts/microchip/sparx5.dtsi | 52 ++
.../boot/dts/microchip/sparx5_pcb125.dts | 5 +
.../dts/microchip/sparx5_pcb134_board.dtsi | 5 +
drivers/pinctrl/Kconfig | 17 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-mchp-sgpio.c | 569 ++++++++++++++++++
include/dt-bindings/gpio/mchp-sgpio.h | 21 +
9 files changed, 738 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-sgpio.yaml
create mode 100644 drivers/pinctrl/pinctrl-mchp-sgpio.c
create mode 100644 include/dt-bindings/gpio/mchp-sgpio.h
--
2.26.2
Powered by blists - more mailing lists