lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200513143526.GG27709@quack2.suse.cz>
Date:   Wed, 13 May 2020 16:35:26 +0200
From:   Jan Kara <jack@...e.cz>
To:     ira.weiny@...el.com
Cc:     linux-ext4@...r.kernel.org,
        Andreas Dilger <adilger.kernel@...ger.ca>,
        "Theodore Y. Ts'o" <tytso@....edu>, Jan Kara <jack@...e.cz>,
        Al Viro <viro@...iv.linux.org.uk>,
        Dan Williams <dan.j.williams@...el.com>,
        Dave Chinner <david@...morbit.com>,
        Christoph Hellwig <hch@....de>, Jeff Moyer <jmoyer@...hat.com>,
        "Darrick J. Wong" <darrick.wong@...cle.com>,
        linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 7/9] fs/ext4: Make DAX mount option a tri-state

On Tue 12-05-20 22:43:22, ira.weiny@...el.com wrote:
> From: Ira Weiny <ira.weiny@...el.com>
> 
> We add 'always', 'never', and 'inode' (default).  '-o dax' continue to
> operate the same.
> 
> Specifically we introduce a 2nd DAX mount flag EXT4_MOUNT2_DAX_NEVER and set
> it and EXT4_MOUNT_DAX_ALWAYS appropriately.
> 
> We also force EXT4_MOUNT2_DAX_NEVER if !CONFIG_FS_DAX.
> 
> https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
> 
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
> 
> ---
> Changes from RFC:
> 	Combine remount check for DAX_NEVER with DAX_ALWAYS
> 	Update ext4_should_enable_dax()
> ---
>  fs/ext4/ext4.h  |  1 +
>  fs/ext4/inode.c |  2 ++
>  fs/ext4/super.c | 43 +++++++++++++++++++++++++++++++++++++------
>  3 files changed, 40 insertions(+), 6 deletions(-)
> 
> diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
> index 86a0994332ce..01d1de838896 100644
> --- a/fs/ext4/ext4.h
> +++ b/fs/ext4/ext4.h
> @@ -1168,6 +1168,7 @@ struct ext4_inode_info {
>  						      blocks */
>  #define EXT4_MOUNT2_HURD_COMPAT		0x00000004 /* Support HURD-castrated
>  						      file systems */
> +#define EXT4_MOUNT2_DAX_NEVER		0x00000008 /* Do not allow Direct Access */
>  
>  #define EXT4_MOUNT2_EXPLICIT_JOURNAL_CHECKSUM	0x00000008 /* User explicitly
>  						specified journal checksum */
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 23e42a223235..140b1930e2f4 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -4400,6 +4400,8 @@ int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
>  
>  static bool ext4_should_enable_dax(struct inode *inode)
>  {
> +	if (test_opt2(inode->i_sb, DAX_NEVER))
> +		return false;
>  	if (!S_ISREG(inode->i_mode))
>  		return false;
>  	if (ext4_should_journal_data(inode))
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 5ec900fdf73c..e01a040a58a9 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -1505,6 +1505,7 @@ enum {
>  	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
>  	Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
>  	Opt_usrquota, Opt_grpquota, Opt_prjquota, Opt_i_version, Opt_dax,
> +	Opt_dax_str,
>  	Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_warn_on_error,
>  	Opt_nowarn_on_error, Opt_mblk_io_submit,
>  	Opt_lazytime, Opt_nolazytime, Opt_debug_want_extra_isize,
> @@ -1570,6 +1571,7 @@ static const match_table_t tokens = {
>  	{Opt_barrier, "barrier"},
>  	{Opt_nobarrier, "nobarrier"},
>  	{Opt_i_version, "i_version"},
> +	{Opt_dax_str, "dax=%s"},

Hum, maybe it would be easier to handle this like we do with e.g. 'data='
mount option? I.e. like:

	{Opt_dax_always, "dax=always"},
	{Opt_dax_never, "dax=never"},
	{Opt_dax_inode, "dax=inode"),

and then handle these three tokens... Not that it would be a big difference
but that's why we usually handle mount options with small "enums" in ext4.

								Honza

>  	{Opt_dax, "dax"},
>  	{Opt_stripe, "stripe=%u"},
>  	{Opt_delalloc, "delalloc"},
> @@ -1767,6 +1769,7 @@ static const struct mount_opts {
>  	{Opt_min_batch_time, 0, MOPT_GTE0},
>  	{Opt_inode_readahead_blks, 0, MOPT_GTE0},
>  	{Opt_init_itable, 0, MOPT_GTE0},
> +	{Opt_dax_str, 0, MOPT_STRING},
>  	{Opt_dax, EXT4_MOUNT_DAX_ALWAYS, MOPT_SET},
>  	{Opt_stripe, 0, MOPT_GTE0},
>  	{Opt_resuid, 0, MOPT_GTE0},
> @@ -2076,13 +2079,32 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token,
>  		}
>  		sbi->s_jquota_fmt = m->mount_opt;
>  #endif
> -	} else if (token == Opt_dax) {
> +	} else if (token == Opt_dax || token == Opt_dax_str) {
>  #ifdef CONFIG_FS_DAX
> -		ext4_msg(sb, KERN_WARNING,
> -		"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> -		sbi->s_mount_opt |= m->mount_opt;
> +		char *tmp = match_strdup(&args[0]);
> +
> +		if (!tmp || !strcmp(tmp, "always")) {
> +			ext4_msg(sb, KERN_WARNING,
> +				"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> +			sbi->s_mount_opt |= EXT4_MOUNT_DAX_ALWAYS;
> +			sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> +		} else if (!strcmp(tmp, "never")) {
> +			sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> +			sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> +		} else if (!strcmp(tmp, "inode")) {
> +			sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> +			sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> +		} else {
> +			ext4_msg(sb, KERN_WARNING, "DAX invalid option.");
> +			kfree(tmp);
> +			return -1;
> +		}
> +
> +		kfree(tmp);
>  #else
>  		ext4_msg(sb, KERN_INFO, "dax option not supported");
> +		sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> +		sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
>  		return -1;
>  #endif
>  	} else if (token == Opt_data_err_abort) {
> @@ -2306,6 +2328,13 @@ static int _ext4_show_options(struct seq_file *seq, struct super_block *sb,
>  	if (DUMMY_ENCRYPTION_ENABLED(sbi))
>  		SEQ_OPTS_PUTS("test_dummy_encryption");
>  
> +	if (test_opt2(sb, DAX_NEVER))
> +		SEQ_OPTS_PUTS("dax=never");
> +	else if (test_opt(sb, DAX_ALWAYS))
> +		SEQ_OPTS_PUTS("dax=always");
> +	else
> +		SEQ_OPTS_PUTS("dax=inode");
> +
>  	ext4_show_quota_options(seq, sb);
>  	return 0;
>  }
> @@ -5425,10 +5454,12 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
>  		goto restore_opts;
>  	}
>  
> -	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS) {
> +	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS ||
> +	    (sbi->s_mount_opt2 ^ old_opts.s_mount_opt2) & EXT4_MOUNT2_DAX_NEVER) {
>  		ext4_msg(sb, KERN_WARNING, "warning: refusing change of "
> -			"dax flag with busy inodes while remounting");
> +			"dax mount option with busy inodes while remounting");
>  		sbi->s_mount_opt ^= EXT4_MOUNT_DAX_ALWAYS;
> +		sbi->s_mount_opt2 ^= EXT4_MOUNT2_DAX_NEVER;
>  	}
>  
>  	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
> -- 
> 2.25.1
> 
-- 
Jan Kara <jack@...e.com>
SUSE Labs, CR

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ