| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200513181717.GA2077014@magnolia>
Date: Wed, 13 May 2020 11:17:17 -0700
From: "Darrick J. Wong" <darrick.wong@...cle.com>
To: Jan Kara <jack@...e.cz>
Cc: ira.weiny@...el.com, linux-ext4@...r.kernel.org,
Andreas Dilger <adilger.kernel@...ger.ca>,
"Theodore Y. Ts'o" <tytso@....edu>,
Al Viro <viro@...iv.linux.org.uk>,
Dan Williams <dan.j.williams@...el.com>,
Dave Chinner <david@...morbit.com>,
Christoph Hellwig <hch@....de>, Jeff Moyer <jmoyer@...hat.com>,
linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 7/9] fs/ext4: Make DAX mount option a tri-state
On Wed, May 13, 2020 at 04:35:26PM +0200, Jan Kara wrote:
> On Tue 12-05-20 22:43:22, ira.weiny@...el.com wrote:
> > From: Ira Weiny <ira.weiny@...el.com>
> >
> > We add 'always', 'never', and 'inode' (default). '-o dax' continue to
> > operate the same.
> >
> > Specifically we introduce a 2nd DAX mount flag EXT4_MOUNT2_DAX_NEVER and set
> > it and EXT4_MOUNT_DAX_ALWAYS appropriately.
> >
> > We also force EXT4_MOUNT2_DAX_NEVER if !CONFIG_FS_DAX.
> >
> > https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
> >
> > Signed-off-by: Ira Weiny <ira.weiny@...el.com>
> >
> > ---
> > Changes from RFC:
> > Combine remount check for DAX_NEVER with DAX_ALWAYS
> > Update ext4_should_enable_dax()
> > ---
> > fs/ext4/ext4.h | 1 +
> > fs/ext4/inode.c | 2 ++
> > fs/ext4/super.c | 43 +++++++++++++++++++++++++++++++++++++------
> > 3 files changed, 40 insertions(+), 6 deletions(-)
> >
> > diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
> > index 86a0994332ce..01d1de838896 100644
> > --- a/fs/ext4/ext4.h
> > +++ b/fs/ext4/ext4.h
> > @@ -1168,6 +1168,7 @@ struct ext4_inode_info {
> > blocks */
> > #define EXT4_MOUNT2_HURD_COMPAT 0x00000004 /* Support HURD-castrated
> > file systems */
> > +#define EXT4_MOUNT2_DAX_NEVER 0x00000008 /* Do not allow Direct Access */
> >
> > #define EXT4_MOUNT2_EXPLICIT_JOURNAL_CHECKSUM 0x00000008 /* User explicitly
> > specified journal checksum */
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 23e42a223235..140b1930e2f4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -4400,6 +4400,8 @@ int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
> >
> > static bool ext4_should_enable_dax(struct inode *inode)
> > {
> > + if (test_opt2(inode->i_sb, DAX_NEVER))
> > + return false;
> > if (!S_ISREG(inode->i_mode))
> > return false;
> > if (ext4_should_journal_data(inode))
> > diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> > index 5ec900fdf73c..e01a040a58a9 100644
> > --- a/fs/ext4/super.c
> > +++ b/fs/ext4/super.c
> > @@ -1505,6 +1505,7 @@ enum {
> > Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
> > Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
> > Opt_usrquota, Opt_grpquota, Opt_prjquota, Opt_i_version, Opt_dax,
> > + Opt_dax_str,
> > Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_warn_on_error,
> > Opt_nowarn_on_error, Opt_mblk_io_submit,
> > Opt_lazytime, Opt_nolazytime, Opt_debug_want_extra_isize,
> > @@ -1570,6 +1571,7 @@ static const match_table_t tokens = {
> > {Opt_barrier, "barrier"},
> > {Opt_nobarrier, "nobarrier"},
> > {Opt_i_version, "i_version"},
> > + {Opt_dax_str, "dax=%s"},
>
> Hum, maybe it would be easier to handle this like we do with e.g. 'data='
> mount option? I.e. like:
>
> {Opt_dax_always, "dax=always"},
> {Opt_dax_never, "dax=never"},
> {Opt_dax_inode, "dax=inode"),
>
> and then handle these three tokens... Not that it would be a big difference
> but that's why we usually handle mount options with small "enums" in ext4.
I was hoping that we could hoist the tristate enum bits out of XFS and
simply share them across the three DAX filesystems, but I have no idea
if that will work with a filesystem that hasn't been converted to the
new mount option parsing api. I'm betting no. :/
(FWIW see enum xfs_dax_mode and struct constant_table dax_param_enums in
fs/xfs/xfs_super.c in the for-next tree.)
Hm, otoh I don't see any recent posting of an ext4 mount parsing
conversion series, so yeah this is probably as good as can be done until
that happens.
--D
> Honza
>
> > {Opt_dax, "dax"},
> > {Opt_stripe, "stripe=%u"},
> > {Opt_delalloc, "delalloc"},
> > @@ -1767,6 +1769,7 @@ static const struct mount_opts {
> > {Opt_min_batch_time, 0, MOPT_GTE0},
> > {Opt_inode_readahead_blks, 0, MOPT_GTE0},
> > {Opt_init_itable, 0, MOPT_GTE0},
> > + {Opt_dax_str, 0, MOPT_STRING},
> > {Opt_dax, EXT4_MOUNT_DAX_ALWAYS, MOPT_SET},
> > {Opt_stripe, 0, MOPT_GTE0},
> > {Opt_resuid, 0, MOPT_GTE0},
> > @@ -2076,13 +2079,32 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token,
> > }
> > sbi->s_jquota_fmt = m->mount_opt;
> > #endif
> > - } else if (token == Opt_dax) {
> > + } else if (token == Opt_dax || token == Opt_dax_str) {
> > #ifdef CONFIG_FS_DAX
> > - ext4_msg(sb, KERN_WARNING,
> > - "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> > - sbi->s_mount_opt |= m->mount_opt;
> > + char *tmp = match_strdup(&args[0]);
> > +
> > + if (!tmp || !strcmp(tmp, "always")) {
> > + ext4_msg(sb, KERN_WARNING,
> > + "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> > + sbi->s_mount_opt |= EXT4_MOUNT_DAX_ALWAYS;
> > + sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> > + } else if (!strcmp(tmp, "never")) {
> > + sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> > + sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> > + } else if (!strcmp(tmp, "inode")) {
> > + sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> > + sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> > + } else {
> > + ext4_msg(sb, KERN_WARNING, "DAX invalid option.");
> > + kfree(tmp);
> > + return -1;
> > + }
> > +
> > + kfree(tmp);
> > #else
> > ext4_msg(sb, KERN_INFO, "dax option not supported");
> > + sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> > + sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> > return -1;
> > #endif
> > } else if (token == Opt_data_err_abort) {
> > @@ -2306,6 +2328,13 @@ static int _ext4_show_options(struct seq_file *seq, struct super_block *sb,
> > if (DUMMY_ENCRYPTION_ENABLED(sbi))
> > SEQ_OPTS_PUTS("test_dummy_encryption");
> >
> > + if (test_opt2(sb, DAX_NEVER))
> > + SEQ_OPTS_PUTS("dax=never");
> > + else if (test_opt(sb, DAX_ALWAYS))
> > + SEQ_OPTS_PUTS("dax=always");
> > + else
> > + SEQ_OPTS_PUTS("dax=inode");
> > +
> > ext4_show_quota_options(seq, sb);
> > return 0;
> > }
> > @@ -5425,10 +5454,12 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
> > goto restore_opts;
> > }
> >
> > - if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS) {
> > + if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS ||
> > + (sbi->s_mount_opt2 ^ old_opts.s_mount_opt2) & EXT4_MOUNT2_DAX_NEVER) {
> > ext4_msg(sb, KERN_WARNING, "warning: refusing change of "
> > - "dax flag with busy inodes while remounting");
> > + "dax mount option with busy inodes while remounting");
> > sbi->s_mount_opt ^= EXT4_MOUNT_DAX_ALWAYS;
> > + sbi->s_mount_opt2 ^= EXT4_MOUNT2_DAX_NEVER;
> > }
> >
> > if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
> > --
> > 2.25.1
> >
> --
> Jan Kara <jack@...e.com>
> SUSE Labs, CR
Powered by blists - more mailing lists