| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200513184735.30104-1-michael.srba@seznam.cz>
Date: Wed, 13 May 2020 20:47:35 +0200
From: michael.srba@...nam.cz
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Suzuki K Poulose <suzuki.poulose@....com>,
Mike Leach <mike.leach@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Michael Srba <michael.srba@...nam.cz>
Subject: [PATCH] arm64: dts: qcom: msm8916: Disable coresight by default
From: Michael Srba <michael.srba@...nam.cz>
On some msm8916 devices, attempts at initializing coresight cause the boot to
fail. This was fixed by disabling the coresight-related nodes in the board dts
files. However, a cleaner approach was chosen for fixing the same issue on
msm8998: disabling coresight by default, and enabling it in board dts files
where desired.
This patch implements the same solution for msm8916, removes now redundant
overwrites in board specific dts files and and enables coresight in db410c's
board dts in order to keep the current behavior.
Fixes: b1fcc5702a41 ("arm64: dts: qcom: msm8916: Add CTI options")
Signed-off-by: Michael Srba <michael.srba@...nam.cz>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 21 +++++++++++
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 23 ------------
.../qcom/msm8916-samsung-a2015-common.dtsi | 23 ------------
arch/arm64/boot/dts/qcom/msm8916.dtsi | 35 +++++++++++++++++++
4 files changed, 56 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 14982762088d..07c150b0ed54 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -519,6 +519,27 @@ mpps@...0 {
wcnss@...b000 {
status = "okay";
};
+
+ tpiu@...000 { status = "okay"; };
+ funnel@...000 { status = "okay"; };
+ replicator@...000 { status = "okay"; };
+ etf@...000 { status = "okay"; };
+ etr@...000 { status = "okay"; };
+ funnel@...000 { status = "okay"; };
+ debug@...000 { status = "okay"; };
+ debug@...000 { status = "okay"; };
+ debug@...000 { status = "okay"; };
+ debug@...000 { status = "okay"; };
+ etm@...000 { status = "okay"; };
+ etm@...000 { status = "okay"; };
+ etm@...000 { status = "okay"; };
+ etm@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
+ cti@...000 { status = "okay"; };
};
usb2513 {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d1ccb9472c8b..691eb1a87bc9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -82,29 +82,6 @@ phy {
wcnss@...b000 {
status = "okay";
};
-
- /*
- * Attempting to enable these devices causes a "synchronous
- * external abort". Suspected cause is that the debug power
- * domain is not enabled by default on this device.
- * Disable these devices for now to avoid the crash.
- *
- * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
- */
- tpiu@...000 { status = "disabled"; };
- funnel@...000 { status = "disabled"; };
- replicator@...000 { status = "disabled"; };
- etf@...000 { status = "disabled"; };
- etr@...000 { status = "disabled"; };
- funnel@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
};
// FIXME: Use extcon device provided by charger driver when available
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 43c5e0f882f1..af812f76e8be 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -75,29 +75,6 @@ phy {
wcnss@...b000 {
status = "okay";
};
-
- /*
- * Attempting to enable these devices causes a "synchronous
- * external abort". Suspected cause is that the debug power
- * domain is not enabled by default on this device.
- * Disable these devices for now to avoid the crash.
- *
- * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
- */
- tpiu@...000 { status = "disabled"; };
- funnel@...000 { status = "disabled"; };
- replicator@...000 { status = "disabled"; };
- etf@...000 { status = "disabled"; };
- etr@...000 { status = "disabled"; };
- funnel@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- debug@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
- etm@...000 { status = "disabled"; };
};
gpio-keys {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8b429954ea29..5cf117e247df 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1228,6 +1228,8 @@ tpiu@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
in-ports {
port {
tpiu_in: endpoint {
@@ -1244,6 +1246,8 @@ funnel@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1283,6 +1287,8 @@ replicator@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1317,6 +1323,8 @@ etf@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
in-ports {
port {
etf_in: endpoint {
@@ -1341,6 +1349,8 @@ etr@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
in-ports {
port {
etr_in: endpoint {
@@ -1357,6 +1367,8 @@ funnel@...000 { /* APSS funnel only 4 inputs are used */
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ status = "disabled";
+
in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1402,6 +1414,7 @@ debug@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
+ status = "disabled";
};
debug@...000 {
@@ -1410,6 +1423,7 @@ debug@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
+ status = "disabled";
};
debug@...000 {
@@ -1418,6 +1432,7 @@ debug@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
+ status = "disabled";
};
debug@...000 {
@@ -1426,6 +1441,7 @@ debug@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
+ status = "disabled";
};
etm0: etm@...000 {
@@ -1438,6 +1454,8 @@ etm0: etm@...000 {
cpu = <&CPU0>;
+ status = "disabled";
+
out-ports {
port {
etm0_out: endpoint {
@@ -1457,6 +1475,8 @@ etm1: etm@...000 {
cpu = <&CPU1>;
+ status = "disabled";
+
out-ports {
port {
etm1_out: endpoint {
@@ -1476,6 +1496,8 @@ etm2: etm@...000 {
cpu = <&CPU2>;
+ status = "disabled";
+
out-ports {
port {
etm2_out: endpoint {
@@ -1495,6 +1517,8 @@ etm3: etm@...000 {
cpu = <&CPU3>;
+ status = "disabled";
+
out-ports {
port {
etm3_out: endpoint {
@@ -1512,6 +1536,8 @@ cti@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
+
+ status = "disabled";
};
/* CTI 1 - TPIU connections */
@@ -1521,6 +1547,8 @@ cti@...000 {
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
+
+ status = "disabled";
};
/* CTIs 2-11 - no information - not instantiated */
@@ -1538,6 +1566,7 @@ cti@...000 {
cpu = <&CPU0>;
arm,cs-dev-assoc = <&etm0>;
+ status = "disabled";
};
/* CTI - CPU-1 */
@@ -1551,6 +1580,8 @@ cti@...000 {
cpu = <&CPU1>;
arm,cs-dev-assoc = <&etm1>;
+
+ status = "disabled";
};
/* CTI - CPU-2 */
@@ -1564,6 +1595,8 @@ cti@...000 {
cpu = <&CPU2>;
arm,cs-dev-assoc = <&etm2>;
+
+ status = "disabled";
};
/* CTI - CPU-3 */
@@ -1577,6 +1610,8 @@ cti@...000 {
cpu = <&CPU3>;
arm,cs-dev-assoc = <&etm3>;
+
+ status = "disabled";
};
--
2.24.0
Powered by blists - more mailing lists