| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200513095222.GB25114@yilunxu-OptiPlex-7050>
Date: Wed, 13 May 2020 17:52:22 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: Moritz Fischer <mdf@...nel.org>
Cc: linux-fpga@...r.kernel.org, linux-kernel@...r.kernel.org,
trix@...hat.com, bhu@...hat.com, Luwei Kang <luwei.kang@...el.com>,
Wu Hao <hao.wu@...el.com>
Subject: Re: [PATCH v5 2/7] fpga: dfl: pci: add irq info for feature devices
enumeration
On Mon, May 11, 2020 at 09:13:01PM -0700, Moritz Fischer wrote:
> On Mon, Apr 20, 2020 at 04:11:38PM +0800, Xu Yilun wrote:
> > Some DFL FPGA PCIe cards (e.g. Intel FPGA Programmable Acceleration
> > Card) support MSI-X based interrupts. This patch allows PCIe driver
> > to prepare and pass interrupt resources to DFL via enumeration API.
> > These interrupt resources could then be assigned to actual features
> > which use them.
> >
> > Signed-off-by: Luwei Kang <luwei.kang@...el.com>
> > Signed-off-by: Wu Hao <hao.wu@...el.com>
> > Signed-off-by: Xu Yilun <yilun.xu@...el.com>
> > Acked-by: Wu Hao <hao.wu@...el.com>
> > ----
> > v2: put irq resources init code inside cce_enumerate_feature_dev()
> > Some minor changes for Hao's comments.
> > v3: Some minor fix for Hao's comments for v2.
> > v4: Some minor fix for Hao's comments for v3.
> > v5: No change.
> > ---
> > drivers/fpga/dfl-pci.c | 80 ++++++++++++++++++++++++++++++++++++++++++++------
> > 1 file changed, 71 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
> > index a78c409..2ff1274 100644
> > --- a/drivers/fpga/dfl-pci.c
> > +++ b/drivers/fpga/dfl-pci.c
> > @@ -39,6 +39,27 @@ static void __iomem *cci_pci_ioremap_bar(struct pci_dev *pcidev, int bar)
> > return pcim_iomap_table(pcidev)[bar];
> > }
> >
> > +static int cci_pci_alloc_irq(struct pci_dev *pcidev)
> > +{
> > + int ret, nvec = pci_msix_vec_count(pcidev);
> > +
> > + if (nvec <= 0) {
> > + dev_dbg(&pcidev->dev, "fpga interrupt not supported\n");
> > + return 0;
> > + }
> > +
> > + ret = pci_alloc_irq_vectors(pcidev, nvec, nvec, PCI_IRQ_MSIX);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return nvec;
> > +}
> > +
> > +static void cci_pci_free_irq(struct pci_dev *pcidev)
> > +{
> > + pci_free_irq_vectors(pcidev);
> > +}
> > +
> > /* PCI Device ID */
> > #define PCIE_DEVICE_ID_PF_INT_5_X 0xBCBD
> > #define PCIE_DEVICE_ID_PF_INT_6_X 0xBCC0
> > @@ -78,17 +99,38 @@ static void cci_remove_feature_devs(struct pci_dev *pcidev)
> >
> > /* remove all children feature devices */
> > dfl_fpga_feature_devs_remove(drvdata->cdev);
> > + cci_pci_free_irq(pcidev);
> > +}
> > +
> > +static int *cci_pci_create_irq_table(struct pci_dev *pcidev, unsigned int nvec)
> > +{
> > + unsigned int i;
> > + int *table;
> > +
> > + table = kcalloc(nvec, sizeof(int), GFP_KERNEL);
> > + if (table) {
> > + for (i = 0; i < nvec; i++)
> > + table[i] = pci_irq_vector(pcidev, i);
> > + }
>
> Have you considered:
> if (!table)
> return table;
>
> for (i = 0; i < nvec; i++)
> table[i] = pci_irq_vector(pcidev, i);
>
> return table;
I'm fine with this. I'll change it.
> > +
> > + return table;
> > +}
> > +
> > +static void cci_pci_free_irq_table(int *table)
> > +{
> > + kfree(table);
> > }
>
> Have you considered just using kfree()?
I thought there is a cci_pci_create_irq_table(), and a symmetric
xx_free_xx() function would make the code easier to understand.
How about we keep this?
Thanks,
Yilun.
> >
> > /* enumerate feature devices under pci device */
> > static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> > {
> > struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
> > + int port_num, bar, i, nvec, ret = 0;
> > struct dfl_fpga_enum_info *info;
> > struct dfl_fpga_cdev *cdev;
> > resource_size_t start, len;
> > - int port_num, bar, i, ret = 0;
> > void __iomem *base;
> > + int *irq_table;
> > u32 offset;
> > u64 v;
> >
> > @@ -97,11 +139,30 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> > if (!info)
> > return -ENOMEM;
> >
> > + /* add irq info for enumeration if the device support irq */
> > + nvec = cci_pci_alloc_irq(pcidev);
> > + if (nvec < 0) {
> > + dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
> > + ret = nvec;
> > + goto enum_info_free_exit;
> > + } else if (nvec) {
> > + irq_table = cci_pci_create_irq_table(pcidev, nvec);
> > + if (!irq_table) {
> > + ret = -ENOMEM;
> > + goto irq_free_exit;
> > + }
> > +
> > + ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
> > + cci_pci_free_irq_table(irq_table);
> > + if (ret)
> > + goto irq_free_exit;
> > + }
> > +
> > /* start to find Device Feature List from Bar 0 */
> > base = cci_pci_ioremap_bar(pcidev, 0);
> > if (!base) {
> > ret = -ENOMEM;
> > - goto enum_info_free_exit;
> > + goto irq_free_exit;
> > }
> >
> > /*
> > @@ -154,7 +215,7 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> > dfl_fpga_enum_info_add_dfl(info, start, len, base);
> > } else {
> > ret = -ENODEV;
> > - goto enum_info_free_exit;
> > + goto irq_free_exit;
> > }
> >
> > /* start enumeration with prepared enumeration information */
> > @@ -162,11 +223,14 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> > if (IS_ERR(cdev)) {
> > dev_err(&pcidev->dev, "Enumeration failure\n");
> > ret = PTR_ERR(cdev);
> > - goto enum_info_free_exit;
> > + goto irq_free_exit;
> > }
> >
> > drvdata->cdev = cdev;
> >
> > +irq_free_exit:
> > + if (ret)
> > + cci_pci_free_irq(pcidev);
> > enum_info_free_exit:
> > dfl_fpga_enum_info_free(info);
> >
> > @@ -211,12 +275,10 @@ int cci_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *pcidevid)
> > }
> >
> > ret = cci_enumerate_feature_devs(pcidev);
> > - if (ret) {
> > - dev_err(&pcidev->dev, "enumeration failure %d.\n", ret);
> > - goto disable_error_report_exit;
> > - }
> > + if (!ret)
> > + return ret;
> >
> > - return ret;
> > + dev_err(&pcidev->dev, "enumeration failure %d.\n", ret);
> >
> > disable_error_report_exit:
> > pci_disable_pcie_error_reporting(pcidev);
> > --
> > 2.7.4
> >
>
> Thanks,
> Moritz
Powered by blists - more mailing lists