linux-kernel - Re: [PATCH] ata: sata_rcar: Fix DMA boundary mask

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200513111140.GA874221@kroah.com>
Date:   Wed, 13 May 2020 13:11:40 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Geert Uytterhoeven <geert+renesas@...der.be>
Cc:     Jens Axboe <axboe@...nel.dk>, Ulf Hansson <ulf.hansson@...aro.org>,
        Christoph Hellwig <hch@....de>,
        Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
        linux-ide@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ata: sata_rcar: Fix DMA boundary mask

On Wed, May 13, 2020 at 01:04:26PM +0200, Geert Uytterhoeven wrote:
> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
> parameters.  Hence the DMA boundary mask supplied by its driver was
> silently ignored, as __scsi_init_queue() doesn't check the return value
> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
> 
> Now the device has gained DMA parameters, the driver-supplied value is
> used, and the following warning is printed on Salvator-XS:
> 
>     DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
>     WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
> 
> (the range of start/end values depend on whether IOMMU support is
>  enabled or not)
> 
> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
> any typical end value, which is odd, will trigger the check.
> 
> Fix this by increasing the DMA boundary value by 1.
> 
> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>

Cc: stable <stable@...r.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>