linux-kernel - [PATCH v4 00/10] Multiple fixes in PCIe qcom driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200514200712.12232-1-ansuelsmth@gmail.com>
Date:   Thu, 14 May 2020 22:07:01 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Ansuel Smith <ansuelsmth@...il.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Stanimir Varbanov <svarbanov@...sol.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Andrew Murray <amurray@...goodpenguin.co.uk>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 00/10] Multiple fixes in PCIe qcom driver

This contains multiple fix for PCIe qcom driver.
Some optional reset and clocks were missing.
Fix a problem with no PARF programming that cause kernel lock on load.
Add support to force gen 1 speed if needed. (due to hardware limitation)
Add ipq8064 rev 2 support that use a different tx termination offset.

v4:
* Fix grammar error across all patch subject
* Use bulk api for clks
* Program PARF only in ipq8064 SoC
* Program tx term only in ipq8064 SoC
* Drop configurable tx-dempth rx-eq
* Make added clk optional

v3:
* Fix check reported by checkpatch --strict
* Rename force_gen1 to gen

v2:
* Drop iATU programming (already done in pcie init)
* Use max-link-speed instead of force-gen1 custom definition
* Drop MRRS to 256B (Can't find a realy reason why this was suggested)
* Introduce a new variant for different revision of ipq8064

Abhishek Sahu (1):
  PCI: qcom: Change duplicate PCI reset to phy reset

Ansuel Smith (8):
  PCI: qcom: Add missing ipq806x clocks in PCIe driver
  dt-bindings: PCI: qcom: Add missing clks
  PCI: qcom: Add missing reset for ipq806x
  dt-bindings: PCI: qcom: Add ext reset
  PCI: qcom: Use bulk clk api and assert on error
  PCI: qcom: Define some PARF params needed for ipq8064 SoC
  PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
  dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant

Sham Muthayyan (1):
  PCI: qcom: Add Force GEN1 support

 .../devicetree/bindings/pci/qcom,pcie.txt     |  15 +-
 drivers/pci/controller/dwc/pcie-qcom.c        | 171 ++++++++++++------
 2 files changed, 123 insertions(+), 63 deletions(-)

-- 
2.25.1