| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200514050301.147442-2-tudor.ambarus@microchip.com>
Date: Thu, 14 May 2020 05:03:07 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>,
<Nicolas.Ferre@...rochip.com>
CC: <robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <Codrin.Ciubotariu@...rochip.com>,
<Tudor.Ambarus@...rochip.com>
Subject: [PATCH 01/16] ARM: dts: at91: sama5d2: Fix the label numbering for
flexcom functions
From: Tudor Ambarus <tudor.ambarus@...rochip.com>
The sama5d2 SoC has the following IPs: [uart0, uart4], {spi0, spi1}, {i2c0, i2c1}.
Label the flexcom functions in order:
flx0: uart5, spi2, i2c2
flx1: uart6, spi3, i2c3
flx2: uart7, spi4, i2c4
flx3: uart8, spi5, i2c5
flx4: uart9, spi6, i2c6
Some boards respected this scheme, others not. Fix the ones that didn't.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
arch/arm/boot/dts/at91-kizbox3-hs.dts | 4 ++--
arch/arm/boot/dts/at91-kizbox3_common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 20 ++++++++++----------
arch/arm/boot/dts/at91-sama5d2_icp.dts | 8 ++++----
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +-
5 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 8734e7f8939e..0da1f0557eaf 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -283,7 +283,7 @@
&flx3 {
status = "okay";
- uart6: serial@200 {
+ uart8: serial@200 {
status = "okay";
};
};
@@ -291,7 +291,7 @@
&flx4 {
status = "okay";
- i2c2: i2c@600 {
+ i2c6: i2c@600 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 299e74d23184..d7a6c972bdac 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -28,7 +28,7 @@
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
- serial6 = &uart6;
+ serial6 = &uart8;
};
chosen {
@@ -207,7 +207,7 @@
};
};
- pinctrl_flx4_default: flx4_i2c2_default {
+ pinctrl_flx4_default: flx4_i2c6_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
<PIN_PD13__FLEXCOM4_IO1>; //CLK
bias-disable;
@@ -324,7 +324,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "disabled";
- uart6: serial@200 {
+ uart8: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x400>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -350,7 +350,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "disabled";
- i2c2: i2c@600 {
+ i2c6: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index b0853bf7901c..d215243fe163 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -21,7 +21,7 @@
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
i2c1 = &i2c1;
- i2c2 = &i2c2;
+ i2c2 = &i2c3;
};
chosen {
@@ -125,7 +125,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c2: i2c@600 {
+ i2c3: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -178,7 +178,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "disabled";
- uart7: serial@200 {
+ uart8: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -190,7 +190,7 @@
status = "disabled"; /* Conflict with isc. */
};
- spi2: spi@400 {
+ spi5: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -207,7 +207,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "okay";
- uart6: serial@200 {
+ uart9: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -216,10 +216,10 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <32>;
- status = "disabled"; /* Conflict with spi3 and i2c3. */
+ status = "disabled"; /* Conflict with spi6 and i2c6. */
};
- spi3: spi@400 {
+ spi6: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -228,10 +228,10 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
atmel,fifo-size = <16>;
- status = "okay"; /* Conflict with uart6 and i2c3. */
+ status = "okay"; /* Conflict with uart5 and i2c6. */
};
- i2c3: i2c@600 {
+ i2c6: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -243,7 +243,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
- status = "disabled"; /* Conflict with uart6 and spi3. */
+ status = "disabled"; /* Conflict with uart5 and spi6. */
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index cc9fa700eafb..1d9556dbbd63 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -22,7 +22,7 @@
serial0 = &uart0; /* debug uart0 + mikro BUS 1 */
serial1 = &uart1; /* mikro BUS 3 */
serial3 = &uart3; /* mikro BUS 2 */
- serial5 = &uart5; /* flx2 */
+ serial5 = &uart7; /* flx2 */
i2c0 = &i2c0;
i2c1 = &i2c1;
};
@@ -159,7 +159,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
- uart5: serial@200 {
+ uart7: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -184,7 +184,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "okay";
- spi3: spi@400 {
+ spi5: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -201,7 +201,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c2: i2c@600 {
+ i2c6: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e0c6cff1a312..0666708b05f9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -377,7 +377,7 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c2: i2c@600 {
+ i2c6: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
--
2.23.0
Powered by blists - more mailing lists