[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200514091312.81032-1-sergiu.cuciurean@analog.com>
Date: Thu, 14 May 2020 12:13:11 +0300
From: Sergiu Cuciurean <sergiu.cuciurean@...log.com>
To: <linux-kernel@...r.kernel.org>, <linux-iio@...r.kernel.org>
CC: Sergiu Cuciurean <sergiu.cuciurean@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
"Stefan Popa" <stefan.popa@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
"Hartmut Knaack" <knaack.h@....de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>
Subject: [PATCH] iio: dac: ad5380: Replace indio_dev->mlock with own device lock
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@...log.com>
---
drivers/iio/dac/ad5380.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
index 2ebe08326048..b37e5675f716 100644
--- a/drivers/iio/dac/ad5380.c
+++ b/drivers/iio/dac/ad5380.c
@@ -51,6 +51,7 @@ struct ad5380_chip_info {
* @vref_reg: vref supply regulator
* @vref: actual reference voltage used in uA
* @pwr_down: whether the chip is currently in power down mode
+ * @lock lock to protect the data buffer during regmap ops
*/
struct ad5380_state {
@@ -59,6 +60,7 @@ struct ad5380_state {
struct regulator *vref_reg;
int vref;
bool pwr_down;
+ struct mutex lock;
};
enum ad5380_type {
@@ -98,7 +100,7 @@ static ssize_t ad5380_write_dac_powerdown(struct iio_dev *indio_dev,
if (ret)
return ret;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
if (pwr_down)
ret = regmap_write(st->regmap, AD5380_REG_SF_PWR_DOWN, 0);
@@ -107,7 +109,7 @@ static ssize_t ad5380_write_dac_powerdown(struct iio_dev *indio_dev,
st->pwr_down = pwr_down;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return ret ? ret : len;
}
@@ -390,6 +392,8 @@ static int ad5380_probe(struct device *dev, struct regmap *regmap,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->num_channels = st->chip_info->num_channels;
+ mutex_init(&st->lock);
+
ret = ad5380_alloc_channels(indio_dev);
if (ret) {
dev_err(dev, "Failed to allocate channel spec: %d\n", ret);
--
2.17.1
Powered by blists - more mailing lists