linux-kernel - Re: [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <a41771f3-b82e-9fc4-798a-99b0c6598699@codeaurora.org>
Date:   Thu, 14 May 2020 10:06:47 -0700
From:   "Asutosh Das (asd)" <asutoshd@...eaurora.org>
To:     Stanley Chu <stanley.chu@...iatek.com>, linux-scsi@...r.kernel.org,
        martin.petersen@...cle.com, avri.altman@....com,
        alim.akhtar@...sung.com, jejb@...ux.ibm.com
Cc:     beanhuo@...ron.com, cang@...eaurora.org, matthias.bgg@...il.com,
        bvanassche@....org, linux-mediatek@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kuohong.wang@...iatek.com, peter.wang@...iatek.com,
        chun-hung.wu@...iatek.com, andy.teng@...iatek.com
Subject: Re: [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime
 suspend

On 5/14/2020 8:01 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
> 
> However the UFS specification mentions,
> 
> "While the flushing operation is in progress, the device is
> in Active power mode."
> 
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
> 
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
> 
> Signed-off-by: Stanley Chu <stanley.chu@...iatek.com>
> ---
>   drivers/scsi/ufs/ufs.h    |  1 -
>   drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
>   2 files changed, 22 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
>   	u32 d_ext_ufs_feature_sup;
>   	u8 b_wb_buffer_type;
>   	u32 d_wb_alloc_units;
> -	bool keep_vcc_on;
>   	u8 b_presrv_uspc_en;
>   };
>   
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..b9f7744ca2b4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
>   	    !hba->dev_info.is_lu_power_on_wp) {
>   		ufshcd_setup_vreg(hba, false);
>   	} else if (!ufshcd_is_ufs_dev_active(hba)) {
> -		if (!hba->dev_info.keep_vcc_on)
> -			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> +		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
>   		if (!ufshcd_is_link_active(hba)) {
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   	enum ufs_pm_level pm_lvl;
>   	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>   	enum uic_link_state req_link_state;
> +	bool keep_curr_dev_pwr_mode = false;
>   
>   	hba->pm_op_in_progress = 1;
>   	if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   			ufshcd_disable_auto_bkops(hba);
>   		}
>   		/*
> -		 * With wb enabled, if the bkops is enabled or if the
> -		 * configured WB type is 70% full, keep vcc ON
> -		 * for the device to flush the wb buffer
> +		 * If device needs to do BKOP or WB buffer flush during
> +		 * Hibern8, keep device power mode as "active power mode"
> +		 * and VCC supply.
>   		 */
> -		if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> -		    ufshcd_wb_keep_vcc_on(hba))
> -			hba->dev_info.keep_vcc_on = true;
> -		else
> -			hba->dev_info.keep_vcc_on = false;
> -	} else {
> -		hba->dev_info.keep_vcc_on = false;
> +		keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> +			(((req_link_state == UIC_LINK_HIBERN8_STATE) ||
> +			((req_link_state == UIC_LINK_ACTIVE_STATE) &&
> +			ufshcd_is_auto_hibern8_enabled(hba))) &&
> +			ufshcd_wb_keep_vcc_on(hba));
>   	}
>   
This looks fine.
But I still think the delayed check of flush status should be done to 
turn-off Vcc when flush is complete.

> -	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> -	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> -	    !ufshcd_is_runtime_pm(pm_op))) {
> -		/* ensure that bkops is disabled */
> -		ufshcd_disable_auto_bkops(hba);
> -		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> -		if (ret)
> -			goto enable_gating;
> +	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> +		if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> +		    !ufshcd_is_runtime_pm(pm_op)) {
> +			/* ensure that bkops is disabled */
> +			ufshcd_disable_auto_bkops(hba);
> +		}
> +
> +		if (!keep_curr_dev_pwr_mode) {
> +			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> +			if (ret)
> +				goto enable_gating;
> +		}
>   	}
>   
>   	flush_work(&hba->eeh_work);
> 


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project