linux-kernel - [PATCH v3 1/2] spi: dw: Clear DMAC register when done or stopped

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200515174856.1406-1-Sergey.Semin@baikalelectronics.ru>
Date:   Fri, 15 May 2020 20:48:54 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Mark Brown <broonie@...nel.org>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>,
        Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        <linux-spi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 1/2] spi: dw: Clear DMAC register when done or stopped

If DMAC register is left uncleared any further DMAless transfers
may cause the DMAC hardware handshaking interface getting activated.
So the next DMA-based Rx/Tx transaction will be started right
after the dma_async_issue_pending() method is invoked even if no
DMATDLR/DMARDLR conditions are met. This at the same time may cause
the Tx/Rx FIFO buffers underrun/overrun. In order to fix this we
must clear DMAC register after a current DMA-based transaction is
finished.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Acked-by: Mark Brown <broonie@...nel.org>
Cc: Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>

---

Changelog v2:
- Move the patch to the head of the series so one could be picked up to
  the stable kernels as a fix.
- Clear the DMACR in the DMA exit callback too.

Changelog v3:
- Rebase on top of the spi/for-5.7.
---
 drivers/spi/spi-dw-mid.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 0d86c37e0aeb..6f55a7ae2299 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -86,6 +86,8 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 
 	dmaengine_terminate_sync(dws->rxchan);
 	dma_release_channel(dws->rxchan);
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 }
 
 static irqreturn_t dma_transfer(struct dw_spi *dws)
@@ -135,6 +137,8 @@ static void dw_spi_dma_tx_done(void *arg)
 	clear_bit(TX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(RX_BUSY, &dws->dma_chan_busy))
 		return;
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 	spi_finalize_current_transfer(dws->master);
 }
 
@@ -181,6 +185,8 @@ static void dw_spi_dma_rx_done(void *arg)
 	clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(TX_BUSY, &dws->dma_chan_busy))
 		return;
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 	spi_finalize_current_transfer(dws->master);
 }
 
@@ -273,6 +279,8 @@ static void mid_spi_dma_stop(struct dw_spi *dws)
 		dmaengine_terminate_sync(dws->rxchan);
 		clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	}
+
+	dw_writel(dws, DW_SPI_DMACR, 0);
 }
 
 static const struct dw_spi_dma_ops mid_dma_ops = {
-- 
2.25.1