Date:   Fri, 15 May 2020 10:32:29 +0100
From:   Brian Starkey <brian.starkey@....com>
To:     Rob Herring <robh@...nel.org>
Cc:     John Stultz <john.stultz@...aro.org>,
        Robin Murphy <robin.murphy@....com>,
        lkml <linux-kernel@...r.kernel.org>,
        Sumit Semwal <sumit.semwal@...aro.org>,
        "Andrew F. Davis" <afd@...com>,
        Benjamin Gaignard <benjamin.gaignard@...aro.org>,
        Liam Mark <lmark@...eaurora.org>,
        Pratik Patel <pratikp@...eaurora.org>,
        Laura Abbott <labbott@...hat.com>,
        Chenbo Feng <fengc@...gle.com>,
        Alistair Strachan <astrachan@...gle.com>,
        Sandeep Patil <sspatil@...gle.com>,
        Hridya Valsaraju <hridya@...gle.com>,
        Christoph Hellwig <hch@....de>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        linux-mm <linux-mm@...ck.org>, nd <nd@....com>
Subject: Re: [RFC][PATCH 3/4] dma-buf: cma_heap: Extend logic to export CMA
 regions tagged with "linux,cma-heap"

On Thu, May 14, 2020 at 09:52:35AM -0500, Rob Herring wrote:
> On Wed, May 13, 2020 at 5:44 AM Brian Starkey <brian.starkey@....com> wrote:
> >
> > Hi Rob,
> >
> > On Tue, May 12, 2020 at 11:37:14AM -0500, Rob Herring wrote:
> > > On Mon, May 04, 2020 at 10:06:28AM +0100, Brian Starkey wrote:
> > > > On Fri, May 01, 2020 at 12:01:40PM -0700, John Stultz wrote:
> > > > > On Fri, May 1, 2020 at 4:08 AM Robin Murphy <robin.murphy@....com> wrote:
> > > > > >
> > > > > > On 2020-05-01 11:21 am, Brian Starkey wrote:
> > > > > > > Hi John,
> > > > > > >
> > > > > > > On Fri, May 01, 2020 at 07:39:48AM +0000, John Stultz wrote:
> > > > > > >> This patch reworks the cma_heap initialization so that
> > > > > > >> we expose both the default CMA region and any CMA regions
> > > > > > >> tagged with "linux,cma-heap" in the device-tree.
> > > > > > >>
> > > > > > >> Cc: Rob Herring <robh+dt@...nel.org>
> > > > > > >> Cc: Sumit Semwal <sumit.semwal@...aro.org>
> > > > > > >> Cc: "Andrew F. Davis" <afd@...com>
> > > > > > >> Cc: Benjamin Gaignard <benjamin.gaignard@...aro.org>
> > > > > > >> Cc: Liam Mark <lmark@...eaurora.org>
> > > > > > >> Cc: Pratik Patel <pratikp@...eaurora.org>
> > > > > > >> Cc: Laura Abbott <labbott@...hat.com>
> > > > > > >> Cc: Brian Starkey <Brian.Starkey@....com>
> > > > > > >> Cc: Chenbo Feng <fengc@...gle.com>
> > > > > > >> Cc: Alistair Strachan <astrachan@...gle.com>
> > > > > > >> Cc: Sandeep Patil <sspatil@...gle.com>
> > > > > > >> Cc: Hridya Valsaraju <hridya@...gle.com>
> > > > > > >> Cc: Christoph Hellwig <hch@....de>
> > > > > > >> Cc: Marek Szyprowski <m.szyprowski@...sung.com>
> > > > > > >> Cc: Robin Murphy <robin.murphy@....com>
> > > > > > >> Cc: Andrew Morton <akpm@...ux-foundation.org>
> > > > > > >> Cc: devicetree@...r.kernel.org
> > > > > > >> Cc: dri-devel@...ts.freedesktop.org
> > > > > > >> Cc: linux-mm@...ck.org
> > > > > > >> Signed-off-by: John Stultz <john.stultz@...aro.org>
> > > > > > >> ---
> > > > > > >>   drivers/dma-buf/heaps/cma_heap.c | 18 +++++++++---------
> > > > > > >>   1 file changed, 9 insertions(+), 9 deletions(-)
> > > > > > >>
> > > > > > >> diff --git a/drivers/dma-buf/heaps/cma_heap.c b/drivers/dma-buf/heaps/cma_heap.c
> > > > > > >> index 626cf7fd033a..dd154e2db101 100644
> > > > > > >> --- a/drivers/dma-buf/heaps/cma_heap.c
> > > > > > >> +++ b/drivers/dma-buf/heaps/cma_heap.c
> > > > > > >> @@ -141,6 +141,11 @@ static int __add_cma_heap(struct cma *cma, void *data)
> > > > > > >>   {
> > > > > > >>      struct cma_heap *cma_heap;
> > > > > > >>      struct dma_heap_export_info exp_info;
> > > > > > >> +    struct cma *default_cma = dev_get_cma_area(NULL);
> > > > > > >> +
> > > > > > >> +    /* We only add the default heap and explicitly tagged heaps */
> > > > > > >> +    if (cma != default_cma && !cma_dma_heap_enabled(cma))
> > > > > > >> +            return 0;
> > > > > > >
> > > > > > > Thinking about the pl111 thread[1], I'm wondering if we should also
> > > > > > > let drivers call this directly to expose their CMA pools, even if they
> > > > > > > aren't tagged for dma-heaps in DT. But perhaps that's too close to
> > > > > > > policy.
> > > > > >
> > > > > > That sounds much like what my first thoughts were - apologies if I'm
> > > > > > wildly off-base here, but as far as I understand:
> > > > > >
> > > > > > - Device drivers know whether they have their own "memory-region" or not.
> > > > > > - Device drivers already have to do *something* to participate in dma-buf.
> > > > > > - Device drivers know best how they make use of both the above.
> > > > > > - Therefore couldn't it be left to drivers to choose whether to register
> > > > > > their CMA regions as heaps, without having to mess with DT at all?
> > >
> > > +1, but I'm biased toward any solution not using DT. :)
> > >
> > > > > I guess I'm not opposed to this. But I guess I'd like to see some more
> > > > > details? You're thinking the pl111 driver would add the
> > > > > "memory-region" node itself?
> > > > >
> > > > > Assuming that's the case, my only worry is what if that memory-region
> > > > > node isn't a CMA area, but instead something like a carveout? Does the
> > > > > driver need to parse enough of the dt to figure out where to register
> > > > > the region as a heap?
> > > >
> > > > My thinking was more like there would already be a reserved-memory
> > > > node in DT for the chunk of memory, appropriately tagged so that it
> > > > gets added as a CMA region.
> > > >
> > > > The device's node would have "memory-region=<&blah>;" and would use
> > > > of_reserved_mem_device_init() to link up dev->cma_area to the
> > > > corresponding cma region.
> > > >
> > > > So far, that's all in-place already. The bit that's missing is
> > > > exposing that dev->cma_area to userspace as a dma_heap - so we could
> > > > just have "int cma_heap_add(struct cma *cma)" or "int
> > > > cma_heap_dev_add(struct device *dev)" or something exported for
> > > > drivers to expose their device-assigned cma region if they wanted to.
> > > >
> > > > I don't think this runs into the lifetime problems of generalised
> > > > heaps-as-modules either, because the CMA region will never go away
> > > > even if the driver does.
> > > >
> > > > Alongside that, I do think the completely DT-driven approach can be
> > > > useful too - because there may be regions which aren't associated with
> > > > any specific device driver, that we want exported as heaps.
> > >
> > > And they are associated with the hardware description rather than the
> > > userspace environment?
> >
> > I'm not sure how to answer that. We already have CMA regions being
> > created from device-tree, so we're only talking about explicitly
> > exposing those to userspace.
> 
> It's easier to argue that how much CMA memory a system/device needs is
> h/w description as that's more a function of devices and frame sizes.
> But exposing to userspace or not is an OS architecture decision. It's
> not really any different than a kernel vs. userspace driver question.
> What's exposed by UIO or spi-dev is purely a kernel thing.
> 
> > Are you thinking that userspace should be deciding whether they get
> > exposed or not? I don't know how userspace would discover them in
> > order to make that decision.
> 
> Or perhaps the kernel should be deciding. Expose to userspace what the
> kernel doesn't need or drivers decide?

If not via device-tree how would the kernel make that decision? For
regions which get "claimed" by a device/driver, obviously that driver
can make the decision, and I totally think we should provide a way for
them to expose it.

But for something like a shared pool amongst the media subsystem,
there may not be any specific single device/driver - and creating a
dummy driver with the sole purpose of exposing the heap doesn't seem
like an improvement over a simple "linux,cma-heap".

Cheers,
-Brian

> 
> It's hard to argue against 1 new property. It's death by a 1000 cuts though.
> 
> Rob

Powered by blists - more mailing lists