| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 May 2020 13:30:05 +0300
From: Avri Altman <avri.altman@....com>
To: "James E . J . Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Bart Van Assche <bvanassche@....org>, alim.akhtar@...sung.com,
asutoshd@...eaurora.org, Zang Leigang <zangleigang@...ilicon.com>,
Avi Shchislowski <avi.shchislowski@....com>,
Bean Huo <beanhuo@...ron.com>, cang@...eaurora.org,
stanley.chu@...iatek.com,
MOHAMMED RAFIQ KAMAL BASHA <md.rafiq@...sung.com>,
Sang-yoon Oh <sangyoon.oh@...sung.com>,
yongmyung lee <ymhungry.lee@...sung.com>,
Jinyoung CHOI <j-young.choi@...sung.com>,
Avri Altman <avri.altman@....com>
Subject: [RFC PATCH 04/13] scsi: ufs: ufshpb: Init part II - Attach scsi device
The ufs boot process is essentially comprised of 2 parts: first a
handshake with the device, and then, scsi scans and assign a scsi device
to each lun. The latter, although running a-synchronically, is
happening right after reading the device configuration - lun by lun.
By now we've read the device HPB configuration, and we are ready to
attach a scsi device to our HPB luns. A perfect timing might be while
scsi is performing its .slave_alloc() or .slave_configure().
Signed-off-by: Avri Altman <avri.altman@....com>
---
drivers/scsi/ufs/ufshcd.c | 3 ++
drivers/scsi/ufs/ufshpb.c | 103 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshpb.h | 3 ++
3 files changed, 109 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index bffe699..c2011bf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4628,6 +4628,9 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
ufshcd_get_lu_power_on_wp_status(hba, sdev);
+ if (ufshcd_is_hpb_supported(hba))
+ ufshpb_attach_sdev(hba, sdev);
+
return 0;
}
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index e94e699..4a10e7b 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -7,7 +7,9 @@
*/
#include <asm/unaligned.h>
+#include <scsi/scsi_dh.h>
#include <scsi/scsi_dh_ufshpb.h>
+#include "../scsi_priv.h"
#include "ufshcd.h"
#include "ufs.h"
#include "ufshpb.h"
@@ -25,6 +27,7 @@ enum ufshpb_control_modes {
struct ufshpb_lun {
u8 lun;
+ struct scsi_device *sdev;
};
@@ -34,6 +37,91 @@ struct ufshpb_lun *ufshpb_luns;
static unsigned long ufshpb_lun_map[BITS_TO_LONGS(UFSHPB_MAX_LUNS)];
static u8 ufshpb_lun_lookup[UFSHPB_MAX_LUNS];
+void ufshpb_remove_lun(u8 lun)
+{
+ struct ufshpb_lun *hpb;
+
+ if (!ufshpb_luns)
+ return;
+
+ hpb = ufshpb_luns + lun;
+ if (hpb->sdev && hpb->sdev->handler_data) {
+ if (scsi_device_get(hpb->sdev))
+ return;
+
+ scsi_dh_release_device(hpb->sdev);
+ scsi_device_put(hpb->sdev);
+ }
+}
+
+/**
+ * ufshpb_attach_sdev - attach and activate a hpb device handler
+ * @hba: per adapter object
+ * @sdev: scsi device that owns that handler
+ *
+ * Called during .slave_alloc(), and after ufshpb_probe() read the device hpb
+ * configuration.
+ */
+void ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev)
+{
+ struct ufshpb_lun *hpb_lun;
+ struct ufshpb_dh_data {
+ struct ufshpb_config *c;
+ struct ufshpb_lun_config *lc;
+ } h;
+ int ret = -EINVAL;
+ u8 lun = sdev->lun;
+ u8 i;
+
+ /* ignore w-luns as those can't be hpb luns */
+ if (lun >= UFSHPB_MAX_LUNS)
+ return;
+
+ /* ignore non-hpb luns */
+ if (!test_bit(lun, ufshpb_lun_map))
+ return;
+
+ i = ufshpb_lun_lookup[lun];
+
+ if (sdev->handler && sdev->handler_data) {
+ dev_err(hba->dev, "trying to re-attach lun %d ?\n", lun);
+ goto out;
+ }
+
+ if (!ufshpb_luns) {
+ dev_err(hba->dev, "HPB was already removed\n");
+ goto out;
+ }
+
+ if (scsi_device_get(sdev)) {
+ dev_err(hba->dev, "failed to get sdev for lun %d\n", lun);
+ goto out;
+ }
+
+ hpb_lun = ufshpb_luns + i;
+ hpb_lun->sdev = sdev;
+
+ ret = scsi_dh_attach(sdev->request_queue, "ufshpb");
+ if (ret || !sdev->handler || !sdev->handler_data)
+ goto put_scsi_dev;
+
+ h.c = ufshpb_conf;
+ h.lc = ufshpb_luns_conf + i;
+
+ memcpy(sdev->handler_data, &h, sizeof(h));
+
+ ret = scsi_dh_activate(sdev->request_queue, NULL, NULL);
+
+put_scsi_dev:
+ scsi_device_put(sdev);
+
+out:
+ if (ret) {
+ dev_err(hba->dev, "attach sdev to HPB lun %d failed\n", lun);
+ ufshpb_remove_lun(i);
+ }
+}
+
/**
* ufshpb_remove - ufshpb cleanup
*
@@ -41,9 +129,24 @@ static u8 ufshpb_lun_lookup[UFSHPB_MAX_LUNS];
*/
void ufshpb_remove(struct ufs_hba *hba)
{
+ if (!ufshpb_conf)
+ goto remove_hpb;
+
+ if (ufshpb_luns) {
+ unsigned int num_hpb_luns = ufshpb_conf->num_hpb_luns;
+ int i;
+
+ spin_lock(hba->host->host_lock);
+ for (i = 0; i < num_hpb_luns; i++)
+ ufshpb_remove_lun(i);
+ spin_unlock(hba->host->host_lock);
+ }
+
kfree(ufshpb_conf);
kfree(ufshpb_luns_conf);
kfree(ufshpb_luns);
+
+remove_hpb:
ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG,
QUERY_FLAG_IDN_HPB_RESET, 0, NULL);
}
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index ee990f4..276a749 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -14,9 +14,12 @@ struct ufs_hba;
#ifdef CONFIG_SCSI_UFS_HPB
void ufshpb_remove(struct ufs_hba *hba);
int ufshpb_probe(struct ufs_hba *hba);
+void ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev);
#else
static inline void ufshpb_remove(struct ufs_hba *hba) {}
static inline int ufshpb_probe(struct ufs_hba *hba) { return 0; }
+static inline void
+ufshpb_attach_sdev(struct ufs_hba *hba, struct scsi_device *sdev) {}
#endif
#endif /* _UFSHPB_H */
--
2.7.4
Powered by blists - more mailing lists