| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200515104758.6934-11-Sergey.Semin@baikalelectronics.ru>
Date: Fri, 15 May 2020 13:47:49 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Mark Brown <broonie@...nel.org>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Paul Burton <paulburton@...nel.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Arnd Bergmann <arnd@...db.de>,
Allison Randal <allison@...utok.net>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Gareth Williams <gareth.williams.jx@...esas.com>,
Rob Herring <robh+dt@...nel.org>, <linux-mips@...r.kernel.org>,
<devicetree@...r.kernel.org>,
Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>,
Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
Thomas Gleixner <tglx@...utronix.de>,
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>,
Linus Walleij <linus.walleij@...aro.org>,
Clement Leger <cleger@...ray.eu>, <linux-spi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v2 10/19] spi: dw: Use DMA max burst to set the request thresholds
Each channel of DMA controller may have a limited length of burst
transaction (number of IO operations performed at ones in a single
DMA client request). This parameter can be used to setup the most
optimal DMA Tx/Rx data level values. In order to avoid the Tx buffer
overrun we can set the DMA Tx level to be of FIFO depth minus the
maximum burst transactions length. To prevent the Rx buffer underflow
the DMA Rx level should be set to the maximum burst transactions length.
This commit setups the DMA channels and the DW SPI DMA Tx/Rx levels
in accordance with these rules.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Paul Burton <paulburton@...nel.org>
Cc: Ralf Baechle <ralf@...ux-mips.org>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Allison Randal <allison@...utok.net>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Gareth Williams <gareth.williams.jx@...esas.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: linux-mips@...r.kernel.org
Cc: devicetree@...r.kernel.org
---
drivers/spi/spi-dw-mid.c | 37 +++++++++++++++++++++++++++++++++----
drivers/spi/spi-dw.h | 2 ++
2 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index e43914dbcadf..70cb68290385 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -35,6 +35,31 @@ static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
return true;
}
+static void mid_spi_maxburst_init(struct dw_spi *dws)
+{
+ struct dma_slave_caps caps;
+ u32 max_burst, def_burst;
+ int ret;
+
+ def_burst = dws->fifo_len / 2;
+
+ ret = dma_get_slave_caps(dws->rxchan, &caps);
+ if (!ret && caps.max_burst)
+ max_burst = caps.max_burst;
+ else
+ max_burst = RX_BURST_LEVEL;
+
+ dws->rxburst = (def_burst > max_burst) ? max_burst : def_burst;
+
+ ret = dma_get_slave_caps(dws->txchan, &caps);
+ if (!ret && caps.max_burst)
+ max_burst = caps.max_burst;
+ else
+ max_burst = TX_BURST_LEVEL;
+
+ dws->txburst = (def_burst > max_burst) ? max_burst : def_burst;
+}
+
static int mid_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
{
struct dw_dma_slave slave = {0};
@@ -67,6 +92,8 @@ static int mid_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
dws->master->dma_rx = dws->rxchan;
dws->master->dma_tx = dws->txchan;
+ mid_spi_maxburst_init(dws);
+
return 0;
free_rxchan:
@@ -92,6 +119,8 @@ static int mid_spi_dma_init_generic(struct device *dev, struct dw_spi *dws)
dws->master->dma_rx = dws->rxchan;
dws->master->dma_tx = dws->txchan;
+ mid_spi_maxburst_init(dws);
+
return 0;
}
@@ -195,7 +224,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
memset(&txconf, 0, sizeof(txconf));
txconf.direction = DMA_MEM_TO_DEV;
txconf.dst_addr = dws->dma_addr;
- txconf.dst_maxburst = TX_BURST_LEVEL;
+ txconf.dst_maxburst = dws->txburst;
txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
txconf.dst_addr_width = convert_dma_width(dws->n_bytes);
txconf.device_fc = false;
@@ -268,7 +297,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
memset(&rxconf, 0, sizeof(rxconf));
rxconf.direction = DMA_DEV_TO_MEM;
rxconf.src_addr = dws->dma_addr;
- rxconf.src_maxburst = RX_BURST_LEVEL;
+ rxconf.src_maxburst = dws->rxburst;
rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
rxconf.src_addr_width = convert_dma_width(dws->n_bytes);
rxconf.device_fc = false;
@@ -293,8 +322,8 @@ static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
{
u16 imr = 0, dma_ctrl = 0;
- dw_writel(dws, DW_SPI_DMARDLR, RX_BURST_LEVEL - 1);
- dw_writel(dws, DW_SPI_DMATDLR, dws->fifo_len - TX_BURST_LEVEL);
+ dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1);
+ dw_writel(dws, DW_SPI_DMATDLR, dws->fifo_len - dws->txburst);
if (xfer->tx_buf) {
dma_ctrl |= SPI_DMA_TDMAE;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 4902f937c3d7..d0c8b7d3a5d2 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -141,7 +141,9 @@ struct dw_spi {
/* DMA info */
struct dma_chan *txchan;
+ u32 txburst;
struct dma_chan *rxchan;
+ u32 rxburst;
unsigned long dma_chan_busy;
dma_addr_t dma_addr; /* phy address of the Data register */
const struct dw_spi_dma_ops *dma_ops;
--
2.25.1
Powered by blists - more mailing lists