linux-kernel - Re: [RESEND PATCH v5 11/11] arm64: dts: mt2712: use non-empty ranges for usb-phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <dbeb21d5-ece6-5a09-4802-ad5ba3d2b21a@gmail.com>
Date:   Sat, 16 May 2020 17:35:18 +0200
From:   Matthias Brugger <matthias.bgg@...il.com>
To:     Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [RESEND PATCH v5 11/11] arm64: dts: mt2712: use non-empty ranges
 for usb-phy



On 11/02/2020 04:21, Chunfeng Yun wrote:
> Use non-empty ranges for usb-phy to make the layout of
> its registers clearer;
> Replace deprecated compatible by generic
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>

queued for v5.7-next/dts64

Thanks a lot

> ---
> v3~v5: no changes
> 
> v2: use generic compatible
> ---
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 42 ++++++++++++-----------
>  1 file changed, 22 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> index 43307bad3f0d..e24f2f2f6004 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -697,30 +697,31 @@ usb_host0: xhci@...70000 {
>  	};
>  
>  	u3phy0: usb-phy@...90000 {
> -		compatible = "mediatek,mt2712-u3phy";
> -		#address-cells = <2>;
> -		#size-cells = <2>;
> -		ranges;
> +		compatible = "mediatek,mt2712-tphy",
> +			     "mediatek,generic-tphy-v2";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0x11290000 0x9000>;
>  		status = "okay";
>  
> -		u2port0: usb-phy@...90000 {
> -			reg = <0 0x11290000 0 0x700>;
> +		u2port0: usb-phy@0 {
> +			reg = <0x0 0x700>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
> -		u2port1: usb-phy@...98000 {
> -			reg = <0 0x11298000 0 0x700>;
> +		u2port1: usb-phy@...0 {
> +			reg = <0x8000 0x700>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
> -		u3port0: usb-phy@...98700 {
> -			reg = <0 0x11298700 0 0x900>;
> +		u3port0: usb-phy@...0 {
> +			reg = <0x8700 0x900>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
> @@ -760,30 +761,31 @@ usb_host1: xhci@...c0000 {
>  	};
>  
>  	u3phy1: usb-phy@...e0000 {
> -		compatible = "mediatek,mt2712-u3phy";
> -		#address-cells = <2>;
> -		#size-cells = <2>;
> -		ranges;
> +		compatible = "mediatek,mt2712-tphy",
> +			     "mediatek,generic-tphy-v2";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0x112e0000 0x9000>;
>  		status = "okay";
>  
> -		u2port2: usb-phy@...e0000 {
> -			reg = <0 0x112e0000 0 0x700>;
> +		u2port2: usb-phy@0 {
> +			reg = <0x0 0x700>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
> -		u2port3: usb-phy@...e8000 {
> -			reg = <0 0x112e8000 0 0x700>;
> +		u2port3: usb-phy@...0 {
> +			reg = <0x8000 0x700>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
> -		u3port1: usb-phy@...e8700 {
> -			reg = <0 0x112e8700 0 0x900>;
> +		u3port1: usb-phy@...0 {
> +			reg = <0x8700 0x900>;
>  			clocks = <&clk26m>;
>  			clock-names = "ref";
>  			#phy-cells = <1>;
>