lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sat, 16 May 2020 15:35:44 -0700 From: Jonathan Bakker <xc-racer2@...e.ca> To: sre@...nel.org Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org, Jonathan Bakker <xc-racer2@...e.ca> Subject: [PATCH] power: supply: max8998_charger: Correct ONLINE and add STATUS props The ONLINE prop should be when the charger is present (ie able to charge), however, it was for when it was actually charging or not. Instead, add the STATUS prop to show whether charging is actually going on or not. The magic numbers have been ported from a downstream kernel for the SGH-T959V. Signed-off-by: Jonathan Bakker <xc-racer2@...e.ca> --- drivers/power/supply/max8998_charger.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c index 9a926c7c0f22..c26023b19f26 100644 --- a/drivers/power/supply/max8998_charger.c +++ b/drivers/power/supply/max8998_charger.c @@ -23,6 +23,7 @@ struct max8998_battery_data { static enum power_supply_property max8998_battery_props[] = { POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */ POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */ + POWER_SUPPLY_PROP_STATUS, /* charger is charging/discharging/full */ }; /* Note that the charger control is done by a current regulator "CHARGER" */ @@ -49,10 +50,28 @@ static int max8998_battery_get_property(struct power_supply *psy, ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, ®); if (ret) return ret; - if (reg & (1 << 3)) - val->intval = 0; - else + + if (reg & (1 << 5)) val->intval = 1; + else + val->intval = 0; + + break; + case POWER_SUPPLY_PROP_STATUS: + ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, ®); + if (ret) + return ret; + + if (!(reg & (1 << 5))) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } else { + if (reg & (1 << 6)) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (reg & (1 << 3)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } break; default: return -EINVAL; -- 2.20.1
Powered by blists - more mailing lists