| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200517191128.GC1695525@furthur.local>
Date: Sun, 17 May 2020 21:11:28 +0200
From: Lubomir Rintel <lkundrak@...sk>
To: Rob Herring <robh@...nel.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Kishon Vijay Abraham I <kishon@...com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Brown <broonie@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-media@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-rtc@...r.kernel.org, linux-serial@...r.kernel.org,
linux-spi@...r.kernel.org, linux-usb@...r.kernel.org
Subject: Re: [PATCH 23/28] dt-bindings: interrupt-controller: Convert
mrvl,intc to json-schema
On Fri, Mar 27, 2020 at 01:42:07PM -0600, Rob Herring wrote:
> On Tue, Mar 17, 2020 at 10:39:17AM +0100, Lubomir Rintel wrote:
> > Convert the mrvl,intc binding to DT schema format using json-schema.
> >
> > Signed-off-by: Lubomir Rintel <lkundrak@...sk>
> > ---
> > .../interrupt-controller/mrvl,intc.txt | 64 --------
> > .../interrupt-controller/mrvl,intc.yaml | 144 ++++++++++++++++++
> > 2 files changed, 144 insertions(+), 64 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
> > deleted file mode 100644
> > index a0ed02725a9d7..0000000000000
> > --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
> > +++ /dev/null
> > @@ -1,64 +0,0 @@
> > -* Marvell MMP Interrupt controller
> > -
> > -Required properties:
> > -- compatible : Should be
> > - "mrvl,mmp-intc" on Marvel MMP,
> > - "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or
> > - "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3
> > -- reg : Address and length of the register set of the interrupt controller.
> > - If the interrupt controller is intc, address and length means the range
> > - of the whole interrupt controller. The "marvell,mmp3-intc" controller
> > - also has a secondary range for the second CPU core. If the interrupt
> > - controller is mux-intc, address and length means one register. Since
> > - address of mux-intc is in the range of intc. mux-intc is secondary
> > - interrupt controller.
> > -- reg-names : Name of the register set of the interrupt controller. It's
> > - only required in mux-intc interrupt controller.
> > -- interrupts : Should be the port interrupt shared by mux interrupts. It's
> > - only required in mux-intc interrupt controller.
> > -- interrupt-controller : Identifies the node as an interrupt controller.
> > -- #interrupt-cells : Specifies the number of cells needed to encode an
> > - interrupt source.
> > -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
> > - controller.
> > -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
> > - detection first.
> > -
> > -Example:
> > - intc: interrupt-controller@...82000 {
> > - compatible = "mrvl,mmp2-intc";
> > - interrupt-controller;
> > - #interrupt-cells = <1>;
> > - reg = <0xd4282000 0x1000>;
> > - mrvl,intc-nr-irqs = <64>;
> > - };
> > -
> > - intcmux4@...82150 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > - interrupts = <4>;
> > - interrupt-controller;
> > - #interrupt-cells = <1>;
> > - reg = <0x150 0x4>, <0x168 0x4>;
> > - reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > - };
> > -
> > -* Marvell Orion Interrupt controller
> > -
> > -Required properties
> > -- compatible : Should be "marvell,orion-intc".
> > -- #interrupt-cells: Specifies the number of cells needed to encode an
> > - interrupt source. Supported value is <1>.
> > -- interrupt-controller : Declare this node to be an interrupt controller.
> > -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
> > - One entry in the list represents 32 interrupts.
> > -
> > -Example:
> > -
> > - intc: interrupt-controller {
> > - compatible = "marvell,orion-intc", "marvell,intc";
> > - interrupt-controller;
> > - #interrupt-cells = <1>;
> > - reg = <0xfed20204 0x04>,
> > - <0xfed20214 0x04>;
> > - };
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
> > new file mode 100644
> > index 0000000000000..f0644f7d7e1d2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
> > @@ -0,0 +1,144 @@
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell MMP/Orion Interrupt controller bindings
> > +
> > +maintainers:
> > + - devicetree@...r.kernel.org
> > +
> > +allOf:
> > + - $ref: /schemas/interrupt-controller.yaml#
>
> Drop this. It is already applied based on matching on the node name.
>
> > + - if:
> > + properties:
> > + compatible:
> > + not:
> > + contains:
> > + const: marvell,orion-intc
> > + then:
> > + required:
> > + - mrvl,intc-nr-irqs
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - mrvl,mmp-intc
> > + - mrvl,mmp2-intc
> > + then:
> > + properties:
> > + reg:
> > + minItems: 1
> > + maxItems: 1
>
> Drop minItems, as just 'maxItems: 1' is enough.
>
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - marvell,mmp3-intc
> > + - mrvl,mmp2-mux-intc
> > + then:
> > + properties:
> > + reg:
> > + minItems: 2
> > + maxItems: 2
>
> Just 'minItems: 2'.
>
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: marvell,orion-intc
> > + then:
> > + properties:
> > + reg:
> > + minItems: 1
> > + maxItems: 2
>
> Normally, for a compatible this would not vary...
>
> In any case, move this to the main section and drop this if.
>
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: mrvl,mmp2-mux-intc
> > + then:
> > + properties:
> > + interrupts:
> > + minItems: 1
> > + maxItems: 1
>
> Just 'maxItems'
>
> > + reg-names:
> > + minItems: 2
> > + maxItems: 2
>
> These are redundant as 'items' size implies this.
>
> > + items:
> > + - const: 'mux status'
> > + - const: 'mux mask'
>
> Move this to the main section.
>
> > + required:
> > + - interrupts
> > + else:
> > + properties:
> > + interrupts: false
> > +
> > +properties:
> > + '#interrupt-cells':
> > + const: 1
> > +
> > + compatible:
> > + enum:
> > + - mrvl,mmp-intc
> > + - mrvl,mmp2-intc
> > + - marvell,mmp3-intc
> > + - marvell,orion-intc
> > + - mrvl,mmp2-mux-intc
> > +
> > + reg: true
> > +
> > + reg-names: true
> > +
> > + interrupts: true
> > +
> > + interrupt-controller: true
> > +
> > + mrvl,intc-nr-irqs:
> > + description: |
> > + Specifies the number of interrupts in the interrupt controller.
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Is there a max number?
There's none in the original bindings document or enforced by the
driver.
> > +
> > + mrvl,clr-mfp-irq:
> > + description: |
> > + Specifies the interrupt that needs to clear MFP edge detection first.
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Constraints?
I don't know how should this be constrained and the original bindings
document is not helpful.
> > +
> > +required:
> > + - '#interrupt-cells'
> > + - compatible
> > + - reg
> > + - interrupt-controller
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + interrupt-controller@...82000 {
> > + compatible = "mrvl,mmp2-intc";
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + reg = <0xd4282000 0x1000>;
> > + mrvl,intc-nr-irqs = <64>;
> > + };
> > +
> > + interrupt-controller@...82150 {
> > + compatible = "mrvl,mmp2-mux-intc";
> > + interrupts = <4>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + reg = <0x150 0x4>, <0x168 0x4>;
> > + reg-names = "mux status", "mux mask";
> > + mrvl,intc-nr-irqs = <2>;
> > + };
> > + - |
> > + interrupt-controller@...20204 {
> > + compatible = "marvell,orion-intc";
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + reg = <0xfed20204 0x04>,
> > + <0xfed20214 0x04>;
> > + };
> > +
> > +...
> > --
> > 2.25.1
> >
Powered by blists - more mailing lists