[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200518173532.216622751@linuxfoundation.org>
Date: Mon, 18 May 2020 19:34:57 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Matt Roper <matthew.d.roper@...el.com>,
Lucas De Marchi <lucas.demarchi@...el.com>,
José Roberto de Souza <jose.souza@...el.com>,
Rodrigo Vivi <rodrigo.vivi@...el.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.6 007/194] drm/i915/display: Load DP_TP_CTL/STATUS offset before use it
From: José Roberto de Souza <jose.souza@...el.com>
[ Upstream commit 12399028751b887bdc2515f1a1e2c81b4fd74085 ]
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes: 4444df6e205b ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@...el.com>
Cc: Lucas De Marchi <lucas.demarchi@...el.com>
Signed-off-by: José Roberto de Souza <jose.souza@...el.com>
Reviewed-by: Matt Roper <matthew.d.roper@...el.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com
(cherry picked from commit edcb9028d66b44d74ba4f8b9daa379b004dc1f85)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 14 +++++++++++---
drivers/gpu/drm/i915/display/intel_dp.c | 5 ++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 2fe594952748d..d3c58026d55e6 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3545,9 +3545,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count, is_mst);
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
intel_edp_panel_on(intel_dp);
intel_ddi_clk_select(encoder, crtc_state);
@@ -4269,12 +4266,18 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
return;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(cpu_transcoder);
+ intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(cpu_transcoder);
+ }
+
intel_dsc_get_config(encoder, pipe_config);
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
@@ -4492,6 +4495,7 @@ static const struct drm_encoder_funcs intel_ddi_funcs = {
static struct intel_connector *
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
{
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
struct intel_connector *connector;
enum port port = intel_dig_port->base.port;
@@ -4502,6 +4506,10 @@ intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_dig_port->dp.prepare_link_retrain =
intel_ddi_prepare_link_retrain;
+ if (INTEL_GEN(dev_priv) < 12) {
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
+ }
if (!intel_dp_init_connector(intel_dig_port, connector)) {
kfree(connector);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index c7424e2a04a35..fa3a9e9e0b290 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2492,9 +2492,6 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
intel_crtc_has_type(pipe_config,
INTEL_OUTPUT_DP_MST));
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
/*
* There are four kinds of DP registers:
*
@@ -7616,6 +7613,8 @@ bool intel_dp_init(struct drm_i915_private *dev_priv,
intel_dig_port->dp.output_reg = output_reg;
intel_dig_port->max_lanes = 4;
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
intel_encoder->type = INTEL_OUTPUT_DP;
intel_encoder->power_domain = intel_port_to_power_domain(port);
--
2.20.1
Powered by blists - more mailing lists