[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200518214939.9730-1-elder@linaro.org>
Date: Mon, 18 May 2020 16:49:39 -0500
From: Alex Elder <elder@...aro.org>
To: bjorn.andersson@...aro.org, agross@...nel.org
Cc: evgreen@...omium.org, subashab@...eaurora.org,
cpratapa@...eaurora.org, robh+dt@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] arm64: dts: qcom: sc7180: add IPA information
Add IPA-related nodes and definitions to "sc7180.dtsi".
Signed-off-by: Alex Elder <elder@...aro.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 51 ++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f1280e00b064..9a3686ce73ea 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -461,6 +461,17 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
psci {
@@ -1007,6 +1018,46 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ipa: ipa@...0000 {
+ compatible = "qcom,sc7180-ipa";
+
+ iommus = <&apps_smmu 0x440 0x3>;
+ reg = <0 0x1e40000 0 0x7000>,
+ <0 0x1e47000 0 0x2000>,
+ <0 0x1e04000 0 0x2c000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
+ <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
+ <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnect-names = "memory",
+ "imem",
+ "config";
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ modem-remoteproc = <&remoteproc_mpss>;
+
+ status = "disabled";
+ };
+
tcsr_mutex_regs: syscon@...0000 {
compatible = "syscon";
reg = <0 0x01f40000 0 0x40000>;
--
2.20.1
Powered by blists - more mailing lists