linux-kernel - Re: [PATCH 1/2] mmc: host: meson-mx-sdhc: fix manual RX FIFO flushing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAPDyKFqmc53WLdsy2Wi4WYvVSNn6u=WXfN+guW8nrynqQa8PVA@mail.gmail.com>
Date:   Mon, 18 May 2020 13:23:27 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "open list:ARM/Amlogic Meson..." <linux-amlogic@...ts.infradead.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Thomas Graichen <thomas.graichen@...il.com>
Subject: Re: [PATCH 1/2] mmc: host: meson-mx-sdhc: fix manual RX FIFO flushing

On Mon, 18 May 2020 at 00:29, Martin Blumenstingl
<martin.blumenstingl@...glemail.com> wrote:
>
> For Meson8 and Meson8b SoCs the vendor driver follows the following
> pattern:
> - for eMMC and SD cards in .set_pdma it sets:
>   pdma->rxfifo_manual_flush = 1;
> - for SDIO cards in .set_pdma it sets:
>   pdma->rxfifo_manual_flush = 0;
> - before syncing the DMA read buffer is sets:
>   pdma->rxfifo_manual_flush |= 0x02;
>
> Set the second bit of MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH without
> clearing the first bit before syncing the DMA read buffer. This fixes a
> problem where Meson8 and Meson8b SoCs would read random garbage from SD
> cards. It is not clear why it worked for eMMC cards. This manifested in
> the following errors when plugging in an SD card:
>   unrecognised SCR structure version <random number>
>
> Fixes: 53ded1b676d199 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
> Cc: Thomas Graichen <thomas.graichen@...il.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/meson-mx-sdhc.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-mx-sdhc.c b/drivers/mmc/host/meson-mx-sdhc.c
> index 5c00958d7754..53e3f6a4245a 100644
> --- a/drivers/mmc/host/meson-mx-sdhc.c
> +++ b/drivers/mmc/host/meson-mx-sdhc.c
> @@ -586,10 +586,17 @@ static irqreturn_t meson_mx_sdhc_irq_thread(int irq, void *irq_data)
>                     cmd->data->flags & MMC_DATA_READ) {
>                         meson_mx_sdhc_wait_cmd_ready(host->mmc);
>
> +                       /*
> +                        * If MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH was
> +                        * previously 0x1 then it has to be set to 0x3. If it
> +                        * was 0x0 before then it has to be set to 0x2. Without
> +                        * this reading SD cards sometimes transfers garbage,
> +                        * which results in cards not being detected due to:
> +                        *   unrecognised SCR structure version <random number>
> +                        */
>                         val = FIELD_PREP(MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH,
>                                          2);
> -                       regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
> -                                          MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH,
> +                       regmap_update_bits(host->regmap, MESON_SDHC_PDMA, val,
>                                            val);
>                 }
>
> --
> 2.26.2
>