[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <884f8277-715c-3377-12b2-c9d9a8413842@codeaurora.org>
Date: Mon, 18 May 2020 18:49:02 +0530
From: Akash Asthana <akashast@...eaurora.org>
To: Rob Herring <robh@...nel.org>
Cc: gregkh@...uxfoundation.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
mgautam@...eaurora.org, rojay@...eaurora.org,
skakit@...eaurora.org, mka@...omium.org
Subject: Re: [PATCH V6 3/3] dt-bindings: serial: Add binding for UART pin swap
Hi Rob,
On 5/15/2020 8:31 AM, Rob Herring wrote:
> On Thu, May 07, 2020 at 08:30:47PM +0530, Akash Asthana wrote:
>> Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW.
>>
>> Signed-off-by: Akash Asthana <akashast@...eaurora.org>
>> ---
>> Documentation/devicetree/bindings/serial/serial.yaml | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
>> index 53204d9..e657dd6 100644
>> --- a/Documentation/devicetree/bindings/serial/serial.yaml
>> +++ b/Documentation/devicetree/bindings/serial/serial.yaml
>> @@ -67,6 +67,12 @@ properties:
>> (wired and enabled by pinmux configuration). This depends on both the
>> UART hardware and the board wiring.
>>
>> + rx-tx-swap:
>> + description: RX and TX pins are swapped.
>> +
>> + cts-rts-swap:
>> + description: CTS and RTS pins are swapped.
> Need 'type: boolean' on both of these.
okay, will correct in next version
Regards,
Akash
>
>> +
>> if:
>> required:
>> - uart-has-rtscts
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
Powered by blists - more mailing lists