linux-kernel - Re: [PATCH v1 4/4] of: platform: Batch fwnode parsing when adding all top level devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <18332705-dd61-9a0e-d931-ae610c8fb600@samsung.com>
Date:   Tue, 19 May 2020 09:11:45 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     Saravana Kannan <saravanak@...gle.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Frank Rowand <frowand.list@...il.com>,
        Len Brown <lenb@...nel.org>,
        Android Kernel Team <kernel-team@...roid.com>,
        LKML <linux-kernel@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
        Ji Luo <ji.luo@....com>,
        Linux Samsung SOC <linux-samsung-soc@...r.kernel.org>
Subject: Re: [PATCH v1 4/4] of: platform: Batch fwnode parsing when adding
 all top level devices

Hi Saravana,

On 19.05.2020 08:48, Saravana Kannan wrote:
> On Mon, May 18, 2020 at 11:25 PM Marek Szyprowski
> <m.szyprowski@...sung.com> wrote:
>> On 15.05.2020 07:35, Saravana Kannan wrote:
>>> The fw_devlink_pause() and fw_devlink_resume() APIs allow batching the
>>> parsing of the device tree nodes when a lot of devices are added. This
>>> will significantly cut down parsing time (as much a 1 second on some
>>> systems). So, use them when adding devices for all the top level device
>>> tree nodes in a system.
>>>
>>> Signed-off-by: Saravana Kannan <saravanak@...gle.com>
>> This patch recently landed in linux-next 20200518. Sadly, it causes
>> regression on Samsung Exynos5433-based TM2e board:
>>
>> s3c64xx-spi 14d30000.spi: Failed to get RX DMA channel
>> s3c64xx-spi 14d50000.spi: Failed to get RX DMA channel
>> s3c64xx-spi 14d30000.spi: Failed to get RX DMA channel
>> s3c64xx-spi 14d50000.spi: Failed to get RX DMA channel
>> s3c64xx-spi 14d30000.spi: Failed to get RX DMA channel
>>
>> Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
>> Modules linked in:
>> CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
>> Hardware name: Samsung TM2E board (DT)
>> Workqueue: events deferred_probe_work_func
>> pstate: 60000005 (nZCv daif -PAN -UAO)
>> pc : samsung_i2s_probe+0x768/0x8f0
>> lr : samsung_i2s_probe+0x688/0x8f0
>> ...
>> Call trace:
>>    samsung_i2s_probe+0x768/0x8f0
>>    platform_drv_probe+0x50/0xa8
>>    really_probe+0x108/0x370
>>    driver_probe_device+0x54/0xb8
>>    __device_attach_driver+0x90/0xc0
>>    bus_for_each_drv+0x70/0xc8
>>    __device_attach+0xdc/0x140
>>    device_initial_probe+0x10/0x18
>>    bus_probe_device+0x94/0xa0
>>    deferred_probe_work_func+0x70/0xa8
>>    process_one_work+0x2a8/0x718
>>    worker_thread+0x48/0x470
>>    kthread+0x134/0x160
>>    ret_from_fork+0x10/0x1c
>> Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
>> ---[ end trace ccf721c9400ddbd6 ]---
>> Kernel panic - not syncing: Fatal exception
>> SMP: stopping secondary CPUs
>> Kernel Offset: disabled
>> CPU features: 0x090002,24006087
>> Memory Limit: none
>>
>> ---[ end Kernel panic - not syncing: Fatal exception ]---
>>
>> Both issues, the lack of DMA for SPI device and Synchronous abort in I2S
>> probe are new after applying this patch. I'm trying to investigate which
>> resources are missing and why. The latter issue means typically that the
>> registers for the given device has been accessed without enabling the
>> needed clocks or power domains.
> Did you try this copy-pasta fix that I sent later?
> https://lore.kernel.org/lkml/20200517173453.157703-1-saravanak@google.com/
>
> Not every system would need it (my test setup didn't), but it helps some cases.
>
> If that fix doesn't help, then some tips for debugging the failing drivers.
> What this pause/resume patch effectively (not explicitly) does is:
> 1. Doesn't immediately probe the devices as they are added in
> of_platform_default_populate_init()
> 2. Adds them in order to the deferred probe list.
> 3. Then kicks off deferred probe on them in the order they were added.
>
> These drivers are just not handling -EPROBE_DEFER correctly or
> assuming probe order and that's causing these issues.
>
> So, we can either fix that or you can try adding some code to flush
> the deferred probe workqueue at the end of fw_devlink_resume().
>
> Let me know how it goes.

So far it looks that your patch revealed a hidden issue in exynos5433 
clocks configuration, because adding clk_ignore_unused parameter to 
kernel command line fixes the boot. I'm still investigating it, so 
probable you can ignore my regression report. I will let you know asap I 
finish checking it.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland