linux-kernel - Re: [PATCH v3] arm64: dts: qcom: apq8016-sbc-d3: Add Qualcomm APQ8016 SBC + D3Camera mezzanine

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200519102256.GB8114@Mani-XPS-13-9360>
Date:   Tue, 19 May 2020 15:52:56 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     Robert Foss <robert.foss@...aro.org>
Cc:     Vinod Koul <vkoul@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org,
        devicetree <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        Nicolas Dechesne <nicolas.dechesne@...aro.org>
Subject: Re: [PATCH v3] arm64: dts: qcom: apq8016-sbc-d3: Add Qualcomm
 APQ8016 SBC + D3Camera mezzanine

Hi Robert,

On Mon, May 18, 2020 at 10:21:29AM +0200, Robert Foss wrote:
> Add device treee support for the Qualcomm APQ8016 SBC, otherwise known as
> the Dragonboard 410c with the D3Camera mezzanine expansion board.
> 
> The D3Camera mezzanine ships in a kit with a OmniVision 5640 sensor module,
> which is what this DT targets.
> 

What is the motivation behind adding this new dts? We have been using the
userspace tool [1] for applying this as an overlay for some time. But if we
start adding dts for mezzanines then for sure we'll end up with some good
numbers which will flood arch/{..}/qcom directory.

I could understand that one of the motivation is to provide nice user experience
to users but that's also taken care by the dt-update tool IMO.

Thanks,
Mani

[1] https://github.com/96boards/dt-update

> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
> 
> Changes since v2:
>  - Vinod: Change copyright assignment to Linaro
> 
> Changes since v1:
>  - Vinod: Changed license to GPL+BSD
>  - Vinod: Changed copyright year to 2020
>  - Nico: Changed name of mezzanine to d3camera
> 
>  arch/arm64/boot/dts/qcom/Makefile             |  1 +
>  .../boot/dts/qcom/apq8016-sbc-d3camera.dts    | 45 +++++++++++++++++++
>  2 files changed, 46 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-d3camera.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index cc103f7020fd..3f95b522694e 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3camera.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>  dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3camera.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3camera.dts
> new file mode 100644
> index 000000000000..752e5ec47499
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3camera.dts
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "apq8016-sbc.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. APQ 8016 SBC w/ D3Camera Mezzanine";
> +	compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc";
> +};
> +
> +&cci_i2c0 {
> +	/delete-node/ camera_rear@3b;
> +
> +	camera_rear@76 {
> +		compatible = "ovti,ov5640";
> +		reg = <0x76>;
> +
> +		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&camera_rear_default>;
> +
> +		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
> +		clock-names = "xclk";
> +		clock-frequency = <23880000>;
> +
> +		vdddo-supply = <&camera_vdddo_1v8>;
> +		vdda-supply = <&camera_vdda_2v8>;
> +		vddd-supply = <&camera_vddd_1v5>;
> +
> +		status = "ok";
> +
> +		port {
> +			ov5640_ep: endpoint {
> +				clock-lanes = <1>;
> +				data-lanes = <0 2>;
> +				remote-endpoint = <&csiphy0_ep>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.25.1
>