linux-kernel - [PATCH v3 2/4] dt-bindings: iio: magnetometer: ak8975: add gpio reset support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200519124402.26076-3-jonathan.albrieux@gmail.com>
Date:   Tue, 19 May 2020 14:43:52 +0200
From:   Jonathan Albrieux <jonathan.albrieux@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     ~postmarketos/upstreaming@...ts.sr.ht,
        Jonathan Albrieux <jonathan.albrieux@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Hartmut Knaack <knaack.h@....de>,
        Jilayne Lovejoy <opensource@...ayne.com>,
        Jonathan Cameron <Jonathan.Cameron@...wei.com>,
        Kate Stewart <kstewart@...uxfoundation.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-iio@...r.kernel.org (open list:IIO SUBSYSTEM AND DRIVERS),
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Steve Winslow <swinslow@...il.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jonathan Cameron <jic23@...nel.org>,
        Rob Herring <robh+dt@...nel.org>
Subject: [PATCH v3 2/4] dt-bindings: iio: magnetometer: ak8975: add gpio reset support

Add reset-gpio support.

Without reset's deassertion during ak8975_power_on(), driver's probe fails
on ak8975_who_i_am() while checking for device identity for AK09911 chip.

AK09911 has an active low reset gpio to handle register's reset.
AK09911 datasheed says that, if not used, reset pin should be connected
to VID. This patch emulates this situation.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@...il.com>
---
 .../devicetree/bindings/iio/magnetometer/ak8975.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.yaml
index 86e3efa693a8..a82c0ff5d098 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.yaml
@@ -37,6 +37,9 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
+  reset-gpio:
+    description: an optional pin needed for AK09911 to set the reset state
+
 required:
   - compatible
   - reg
@@ -53,6 +56,7 @@ examples:
             reg = <0x0c>;
             gpios = <&gpj0 7 0>;
             vdd-supply = <&ldo_3v3_gnss>;
+            reset-gpio = <&msmgpio 111 1>;
             mount-matrix = "-0.984807753012208",  /* x0 */
                            "0",                   /* y0 */
                            "-0.173648177666930",  /* z0 */
-- 
2.17.1